genEquipServicesNGPWProfilesRtpHeaderUsed
MWRM-NETWORK-MIB ·
.1.3.6.1.4.1.2281.10.8.4.6.3.1.8
Object
If set to False: an RTP header is not pre-pended to the TDM packet.
Context
- MIB
- MWRM-NETWORK-MIB
- OID
.1.3.6.1.4.1.2281.10.8.4.6.3.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- genEquipServicesNGPWProfilesEntry
- Table
- genEquipServicesNGPWProfilesTable
- Siblings
- 18
Syntax
MWRM-UNIT-MIBEnableDisableSMI2
- Source
- MWRM-UNIT-MIBEnableDisableSMI2
- Base type
Enumeration
Values & Constraints
Type Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| genEquipServicesNGPWProfilesPWProfileId Unique PW profile ID. | column | Integer32 | .1.3.6.1.4.1.2281.10.8.4.6.3.1.1 |
| genEquipServicesNGPWProfilesRtpTimestampAbsFactor Multiplication factor for 8KHz units in absolute mode of RTP timestamping. | column | Integer32 | .1.3.6.1.4.1.2281.10.8.4.6.3.1.10 |
| genEquipServicesNGPWProfilesLopsDetection Timeout for TDM ports loopback. | column | MWRM-UNIT-MIBEnableDisableSMI2 | .1.3.6.1.4.1.2281.10.8.4.6.3.1.11 |
| genEquipServicesNGPWProfilesConseqPacketsInSync Number of consecutive packets with sequential sequence numbers required to exit LOPS. | column | Integer32 | .1.3.6.1.4.1.2281.10.8.4.6.3.1.12 |
| genEquipServicesNGPWProfilesConseqMissPktsOutSync Number of consecutive missing packets required to enter LOPS. | column | Integer32 | .1.3.6.1.4.1.2281.10.8.4.6.3.1.13 |
| genEquipServicesNGPWProfilesPktLossTimeWindow Time for computing average packet loss rate to detect excessive packet loss. | column | Integer32 | .1.3.6.1.4.1.2281.10.8.4.6.3.1.14 |
| genEquipServicesNGPWProfilesExcessivePktLossThresh Alarm threshold (in percent) for excessive packet loss. | column | Integer32 | .1.3.6.1.4.1.2281.10.8.4.6.3.1.15 |
| genEquipServicesNGPWProfilesAlarmThresh Delay (in msecs) for persistent alarm setting. | column | Integer32 | .1.3.6.1.4.1.2281.10.8.4.6.3.1.16 |
| genEquipServicesNGPWProfilesClearAlarmThresh Delay (in msecs) for persistent alarm clearing. | column | Integer32 | .1.3.6.1.4.1.2281.10.8.4.6.3.1.17 |
| genEquipServicesNGPWProfilesMissingPktsToSes TPercent of missing packets detected in 1 second window to cause SES to be counted. | column | Integer32 | .1.3.6.1.4.1.2281.10.8.4.6.3.1.18 |
| genEquipServicesNGPWProfilesPayloadSize Payload size, in terms of TDM frames in each packet. | column | Integer32 | .1.3.6.1.4.1.2281.10.8.4.6.3.1.2 |
| genEquipServicesNGPWProfilesJitterBufferDepth Jitter buffer depth (in milliseconds) to allow accommodation to the PSN-specific packet delay variation. | column | Integer32 | .1.3.6.1.4.1.2281.10.8.4.6.3.1.3 |
| genEquipServicesNGPWProfilesRowStatus Row status to allow user add entries dynamically. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2281.10.8.4.6.3.1.30 |
| genEquipServicesNGPWProfilesPayloadSuppression When enabled, payload is suppresed upon incoming TDM failure. | column | MWRM-UNIT-MIBEnableDisableSMI2 | .1.3.6.1.4.1.2281.10.8.4.6.3.1.4 |
| genEquipServicesNGPWProfilesPayloadType Payload type byte. | column | Integer32 | .1.3.6.1.4.1.2281.10.8.4.6.3.1.5 |
| genEquipServicesNGPWProfilesDs0Filler Byte pattern transmitted on ds0 channels when packets over/underflow the jitter buffer. | column | Integer32 | .1.3.6.1.4.1.2281.10.8.4.6.3.1.6 |
| genEquipServicesNGPWProfilesCasAlarmPattern CAS alarm pattern transmitted on E1 interface when packets over/underflow the jitter buffer. | column | Integer32 | .1.3.6.1.4.1.2281.10.8.4.6.3.1.7 |
| genEquipServicesNGPWProfilesRtpTimestampMode RTP timestamp mode. | column | PWRtpTimeStampMode | .1.3.6.1.4.1.2281.10.8.4.6.3.1.9 |