genEquipProtocolsG8032ErpiAttributesRplOwner
MWRM-NETWORK-MIB ·
.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.13
Object
column
r/w
Enumeration
Indicates whether the ERPI is RPL owner and if such, which ERPI Port is the owner
Context
- MIB
- MWRM-NETWORK-MIB
- OID
.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- genEquipProtocolsG8032ErpiAttributesEntry
- Table
- genEquipProtocolsG8032ErpiAttributesTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | none |
1 | west |
2 | east |
3 | sub-ring |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| genEquipProtocolsG8032ErpiAttributesErpiId ERPI ID | column | Integer32 | .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.1 |
| genEquipProtocolsG8032ErpiAttributesDownMep Indicates if the ERPI is related to a down MEP and if to which one | column | Integer32 | .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.10 |
| genEquipProtocolsG8032ErpiAttributesRevertive Indicates whether the ERPI is revertive | column | IfMgrTrueFalse | .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.11 |
| genEquipProtocolsG8032ErpiAttributesRingState Describes the state in which id ERPI is assumed.
Possible states are: Initializing, Idle, Pending, Protecting, FS, MS) | column | Integer32 | .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.12 |
| genEquipProtocolsG8032ErpiAttributesSdHandling Indicates the ERPI takes into account SD (Signal Degraded) events (BER, capacity degradation) | column | IfMgrTrueFalse | .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.14 |
| genEquipProtocolsG8032ErpiAttributesServiceId Indicates Service ID of the ERPI | column | Integer32 | .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.15 |
| genEquipProtocolsG8032ErpiAttributesErpiType ERPI Type ( ring / sub-ring / ring with sub-ring port) | column | Enumeration | .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.16 |
| genEquipProtocolsG8032ErpiAttributesVersion Indicates the ERPI version number used in the ERPI protocol | column | Integer32 | .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.17 |
| genEquipProtocolsG8032ErpiAttributesVirtualChannel VLAN of virtual channel; 0 denotes no virtual channel | column | Integer32 | .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.18 |
| genEquipProtocolsG8032ErpiAttributesWtr Indicates the ERPI WTR; units are minutes | column | Integer32 | .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.19 |
| genEquipProtocolsG8032ErpiAttributesErpiName ERPI Name | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.2 |
| genEquipProtocolsG8032ErpiAttributesGuardTime Indicates the ERPI Guard Time; units are msec, steps are 10msec. | column | Integer32 | .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.3 |
| genEquipProtocolsG8032ErpiAttributesRowStatus Table Mib Row Status. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.30 |
| genEquipProtocolsG8032ErpiAttributesHoldoffTime The ERPI holdoff Time; units are msec, steps are 100msec.
Controls the time from failure detection to responding to failure | column | Integer32 | .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.4 |
| genEquipProtocolsG8032ErpiAttributesLastChangeTs Denotes the Timestamp of the last ring state machine transition | column | Integer32 | .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.5 |
| genEquipProtocolsG8032ErpiAttributesLastHpRequest Describes the last high-priority request. | column | G8032LastState | .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.6 |
| genEquipProtocolsG8032ErpiAttributesLastLocalState Describes the current local state that is input to the ERPI state machine | column | G8032LastState | .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.7 |
| genEquipProtocolsG8032ErpiAttributesLastRemoteState Describes the last event received from the far end | column | G8032LastState | .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.8 |
| genEquipProtocolsG8032ErpiAttributesMegLevel Indicates MEG LEVEL, when interoperating with SOAM | column | Integer32 | .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.9 |