genEquipProtocolsG8032ErpiAttributesLastHpRequest

MWRM-NETWORK-MIB · .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.6

Object

column G8032LastState

Describes the last high-priority request.

Context

MIB: MWRM-NETWORK-MIB
OID: .1.3.6.1.4.1.2281.10.8.1.6.3.10.1.6
Type: column
Access: readonly
Status: current
Parent: genEquipProtocolsG8032ErpiAttributesEntry
Table: genEquipProtocolsG8032ErpiAttributesTable
Siblings: 19

Syntax

G8032LastState

Source: G8032LastState
Base type: Enumeration

Values & Constraints

Type Values

`0`	nr
`1`	raps-nr
`2`	raps-rb-nr
`3`	running-wtb
`4`	expired-wtb
`5`	running-wtr
`6`	expired-wtr
`7`	ms
`8`	raps-ms
`9`	raps-sd
`10`	clear-sd
`11`	local-sd
`12`	raps-sf
`13`	clear-sf
`14`	local-sf
`15`	raps-fs
`16`	fs
`17`	clear

Related Objects

Sibling Objects

Object	Type	Syntax	OID
genEquipProtocolsG8032ErpiAttributesErpiId ERPI ID	column	Integer32	`.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.1`
genEquipProtocolsG8032ErpiAttributesDownMep Indicates if the ERPI is related to a down MEP and if to which one	column	Integer32	`.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.10`
genEquipProtocolsG8032ErpiAttributesRevertive Indicates whether the ERPI is revertive	column	IfMgrTrueFalse	`.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.11`
genEquipProtocolsG8032ErpiAttributesRingState Describes the state in which id ERPI is assumed. Possible states are: Initializing, Idle, Pending, Protecting, FS, MS)	column	Integer32	`.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.12`
genEquipProtocolsG8032ErpiAttributesRplOwner Indicates whether the ERPI is RPL owner and if such, which ERPI Port is the owner	column	Enumeration	`.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.13`
genEquipProtocolsG8032ErpiAttributesSdHandling Indicates the ERPI takes into account SD (Signal Degraded) events (BER, capacity degradation)	column	IfMgrTrueFalse	`.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.14`
genEquipProtocolsG8032ErpiAttributesServiceId Indicates Service ID of the ERPI	column	Integer32	`.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.15`
genEquipProtocolsG8032ErpiAttributesErpiType ERPI Type ( ring / sub-ring / ring with sub-ring port)	column	Enumeration	`.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.16`
genEquipProtocolsG8032ErpiAttributesVersion Indicates the ERPI version number used in the ERPI protocol	column	Integer32	`.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.17`
genEquipProtocolsG8032ErpiAttributesVirtualChannel VLAN of virtual channel; 0 denotes no virtual channel	column	Integer32	`.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.18`
genEquipProtocolsG8032ErpiAttributesWtr Indicates the ERPI WTR; units are minutes	column	Integer32	`.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.19`
genEquipProtocolsG8032ErpiAttributesErpiName ERPI Name	column	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.2`
genEquipProtocolsG8032ErpiAttributesGuardTime Indicates the ERPI Guard Time; units are msec, steps are 10msec.	column	Integer32	`.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.3`
genEquipProtocolsG8032ErpiAttributesRowStatus Table Mib Row Status.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.30`
genEquipProtocolsG8032ErpiAttributesHoldoffTime The ERPI holdoff Time; units are msec, steps are 100msec. Controls the time from failure detection to responding to failure	column	Integer32	`.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.4`
genEquipProtocolsG8032ErpiAttributesLastChangeTs Denotes the Timestamp of the last ring state machine transition	column	Integer32	`.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.5`
genEquipProtocolsG8032ErpiAttributesLastLocalState Describes the current local state that is input to the ERPI state machine	column	G8032LastState	`.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.7`
genEquipProtocolsG8032ErpiAttributesLastRemoteState Describes the last event received from the far end	column	G8032LastState	`.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.8`
genEquipProtocolsG8032ErpiAttributesMegLevel Indicates MEG LEVEL, when interoperating with SOAM	column	Integer32	`.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.9`