genEquipInterfacesSdhLineTxProtectionMode
MWRM-NETWORK-MIB ·
.1.3.6.1.4.1.2281.10.9.4.1.1.12
Object
column
r/w
Enumeration
this parameter configures the behavior of the transmitting line in a 1+1 HSB configuration. In normal mode the stand-by signal is silenced. In uni-directional MSP both units will transmit
Context
- MIB
- MWRM-NETWORK-MIB
- OID
.1.3.6.1.4.1.2281.10.9.4.1.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- genEquipInterfacesSdhEntry
- Table
- genEquipInterfacesSdhTable
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | normal |
2 | uni-directional-MSP |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| genEquipInterfacesSdhMuteTx Mute Tx option on the interface. | column | MWRM-UNIT-MIBEnableDisableSMI2 | .1.3.6.1.4.1.2281.10.9.4.1.1.1 |
| genEquipInterfacesSdhLoopback SDH Loopback. | column | Enumeration | .1.3.6.1.4.1.2281.10.9.4.1.1.10 |
| genEquipInterfacesSdhClockSourceStatus The actual source of the clock for the outgoing STM-1/OC-3 signal.
It may differ from the desired source if the source signal is missing or corrupt | column | Enumeration | .1.3.6.1.4.1.2281.10.9.4.1.1.11 |
| genEquipInterfacesSdhSyncVC The outgoing VC signal to be taken as the STM-1/OC-3 synchronization source if
genEquipInterfacesSdhClockSource is set to synchronization-vc | column | Integer32 | .1.3.6.1.4.1.2281.10.9.4.1.1.13 |
| genEquipInterfacesSdhAdmin Administrative status of the STM-1/OC3 port | column | MWRM-UNIT-MIBEnableDisableSMI2 | .1.3.6.1.4.1.2281.10.9.4.1.1.14 |
| genEquipInterfacesSdhPdhTimingMode Clock reference for outgoing PDH signals configured in 'absolute clock' mode | column | MWRM-UNIT-MIBEnableDisableSMI2 | .1.3.6.1.4.1.2281.10.9.4.1.1.15 |
| genEquipInterfacesSdhSlot Slot ID | column | Integer32 | .1.3.6.1.4.1.2281.10.9.4.1.1.16 |
| genEquipInterfacesSdhIdleCode Value to be transmitted at PDH signals inside the STM-1/OC3 when there is no data to transmit | column | Integer32 | .1.3.6.1.4.1.2281.10.9.4.1.1.17 |
| genEquipInterfacesSdhSSMAdmin SSM support admin for this interface | column | MWRM-UNIT-MIBEnableDisableSMI2 | .1.3.6.1.4.1.2281.10.9.4.1.1.18 |
| genEquipInterfacesSdhSSMPattern Indicates the default SSM pattern to be transmitted in case if TCC clock synchronization subsystem doesn't provide SSM pattern value | column | Integer32 | .1.3.6.1.4.1.2281.10.9.4.1.1.19 |
| genEquipInterfacesSdhClockSource The source of the clock being used.
sync-vc option is for future support, to use one of the outgoing TDM VCs as a source. | column | Enumeration | .1.3.6.1.4.1.2281.10.9.4.1.1.2 |
| genEquipInterfacesSdhTraceIdAdmin Enable/disable of J0 mismatch checking on RX direction | column | MWRM-UNIT-MIBEnableDisableSMI2 | .1.3.6.1.4.1.2281.10.9.4.1.1.20 |
| genEquipInterfacesSdhVCSignalLabel Sets the signal label bits to be sent and expected in every VC-11/12;
use non-specific payload only for backwards compatibility with old equipment | column | Enumeration | .1.3.6.1.4.1.2281.10.9.4.1.1.21 |
| genEquipInterfacesSdhVcRdiAdmin VC-RDI signaling admin status | column | MWRM-UNIT-MIBEnableDisableSMI2 | .1.3.6.1.4.1.2281.10.9.4.1.1.22 |
| genEquipInterfacesSdhAISAdmin Enable, Disable AIS signaling at the V5 byte on the STM-1, OC-3 interface. | column | MWRM-UNIT-MIBEnableDisable | .1.3.6.1.4.1.2281.10.9.4.1.1.3 |
| genEquipInterfacesSdhTraceIdReceived J0 Trace Identifier signal that was received on the interface. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2281.10.9.4.1.1.4 |
| genEquipInterfacesSdhTraceIdTransmitted J0 Trace Identifier signal that is transmitted on the interface. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2281.10.9.4.1.1.5 |
| genEquipInterfacesSdhTraceIdExpected J0 Trace Identifier signal that is expected to be received on the interface. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2281.10.9.4.1.1.6 |
| genEquipInterfacesSdhTraceIdStringLength Trace identifier string length. Lengths 0 and 15 are valid for SDH systems. Length 62 is additionally available in SONET systems. | column | Enumeration | .1.3.6.1.4.1.2281.10.9.4.1.1.7 |
| genEquipInterfacesSdhExcessiveBer Excessive BER threshold on the interface. | column | Enumeration | .1.3.6.1.4.1.2281.10.9.4.1.1.8 |
| genEquipInterfacesSdhSignalDegrade Signal degrade threshold on the interface. | column | Enumeration | .1.3.6.1.4.1.2281.10.9.4.1.1.9 |