genEquipInterfacesSdhAdmin

MWRM-NETWORK-MIB · .1.3.6.1.4.1.2281.10.9.4.1.1.14
MIB view Table view

Object

column r/w MWRM-UNIT-MIBEnableDisableSMI2 
Administrative status of the STM-1/OC3 port

Context

MIB
MWRM-NETWORK-MIB
OID
.1.3.6.1.4.1.2281.10.9.4.1.1.14
Type
column
Access
readwrite
Status
current
Parent
genEquipInterfacesSdhEntry
Table
genEquipInterfacesSdhTable
Siblings
21

Syntax

MWRM-UNIT-MIBEnableDisableSMI2
Source
MWRM-UNIT-MIBEnableDisableSMI2
Base type
Enumeration

Values & Constraints

Type Values
0disable
1enable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
genEquipInterfacesSdhMuteTx
Mute Tx option on the interface.
columnMWRM-UNIT-MIBEnableDisableSMI2.1.3.6.1.4.1.2281.10.9.4.1.1.1
genEquipInterfacesSdhLoopback
SDH Loopback.
columnEnumeration.1.3.6.1.4.1.2281.10.9.4.1.1.10
genEquipInterfacesSdhClockSourceStatus
The actual source of the clock for the outgoing STM-1/OC-3 signal. It may differ from the desired source if the source signal is missing or corrupt
columnEnumeration.1.3.6.1.4.1.2281.10.9.4.1.1.11
genEquipInterfacesSdhLineTxProtectionMode
this parameter configures the behavior of the transmitting line in a 1+1 HSB configuration. In normal mode the stand-by signal is silenced. In uni-directional MSP both units will …
columnEnumeration.1.3.6.1.4.1.2281.10.9.4.1.1.12
genEquipInterfacesSdhSyncVC
The outgoing VC signal to be taken as the STM-1/OC-3 synchronization source if genEquipInterfacesSdhClockSource is set to synchronization-vc
columnInteger32.1.3.6.1.4.1.2281.10.9.4.1.1.13
genEquipInterfacesSdhPdhTimingMode
Clock reference for outgoing PDH signals configured in 'absolute clock' mode
columnMWRM-UNIT-MIBEnableDisableSMI2.1.3.6.1.4.1.2281.10.9.4.1.1.15
genEquipInterfacesSdhSlot
Slot ID
columnInteger32.1.3.6.1.4.1.2281.10.9.4.1.1.16
genEquipInterfacesSdhIdleCode
Value to be transmitted at PDH signals inside the STM-1/OC3 when there is no data to transmit
columnInteger32.1.3.6.1.4.1.2281.10.9.4.1.1.17
genEquipInterfacesSdhSSMAdmin
SSM support admin for this interface
columnMWRM-UNIT-MIBEnableDisableSMI2.1.3.6.1.4.1.2281.10.9.4.1.1.18
genEquipInterfacesSdhSSMPattern
Indicates the default SSM pattern to be transmitted in case if TCC clock synchronization subsystem doesn't provide SSM pattern value
columnInteger32.1.3.6.1.4.1.2281.10.9.4.1.1.19
genEquipInterfacesSdhClockSource
The source of the clock being used. sync-vc option is for future support, to use one of the outgoing TDM VCs as a source.
columnEnumeration.1.3.6.1.4.1.2281.10.9.4.1.1.2
genEquipInterfacesSdhTraceIdAdmin
Enable/disable of J0 mismatch checking on RX direction
columnMWRM-UNIT-MIBEnableDisableSMI2.1.3.6.1.4.1.2281.10.9.4.1.1.20
genEquipInterfacesSdhVCSignalLabel
Sets the signal label bits to be sent and expected in every VC-11/12; use non-specific payload only for backwards compatibility with old equipment
columnEnumeration.1.3.6.1.4.1.2281.10.9.4.1.1.21
genEquipInterfacesSdhVcRdiAdmin
VC-RDI signaling admin status
columnMWRM-UNIT-MIBEnableDisableSMI2.1.3.6.1.4.1.2281.10.9.4.1.1.22
genEquipInterfacesSdhAISAdmin
Enable, Disable AIS signaling at the V5 byte on the STM-1, OC-3 interface.
columnMWRM-UNIT-MIBEnableDisable.1.3.6.1.4.1.2281.10.9.4.1.1.3
genEquipInterfacesSdhTraceIdReceived
J0 Trace Identifier signal that was received on the interface.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.2281.10.9.4.1.1.4
genEquipInterfacesSdhTraceIdTransmitted
J0 Trace Identifier signal that is transmitted on the interface.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.2281.10.9.4.1.1.5
genEquipInterfacesSdhTraceIdExpected
J0 Trace Identifier signal that is expected to be received on the interface.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.2281.10.9.4.1.1.6
genEquipInterfacesSdhTraceIdStringLength
Trace identifier string length. Lengths 0 and 15 are valid for SDH systems. Length 62 is additionally available in SONET systems.
columnEnumeration.1.3.6.1.4.1.2281.10.9.4.1.1.7
genEquipInterfacesSdhExcessiveBer
Excessive BER threshold on the interface.
columnEnumeration.1.3.6.1.4.1.2281.10.9.4.1.1.8
genEquipInterfacesSdhSignalDegrade
Signal degrade threshold on the interface.
columnEnumeration.1.3.6.1.4.1.2281.10.9.4.1.1.9