genEquipInterfacesPWCardSlotNumber

MWRM-NETWORK-MIB · .1.3.6.1.4.1.2281.10.9.7.1.1.1

MIB view Table view

Object

column r/w Integer32

Slot number where the relevant PW card is inserted.

Context

MIB: MWRM-NETWORK-MIB
OID: .1.3.6.1.4.1.2281.10.9.7.1.1.1
Type: column
Access: readwrite
Status: current
Parent: genEquipInterfacesPWCardEntry
Table: genEquipInterfacesPWCardTable
Siblings: 11

Syntax

Integer32

Values & Constraints

Object Constraints

range: 2-12

Related Objects

Sibling Objects

Object	Type	Syntax	OID
genEquipInterfacesPWCardClkRecoveryMode Clock recovery mode for the card.	column	Enumeration	`.1.3.6.1.4.1.2281.10.9.7.1.1.10`
genEquipInterfacesPWCardDifferentialClkFrequency Frequency for differential clock (none for adaptive).	column	Enumeration	`.1.3.6.1.4.1.2281.10.9.7.1.1.11`
genEquipInterfacesPWCardDifferentialClkSource Reference clock source for differential clock recovery (none for adaptive).	column	Enumeration	`.1.3.6.1.4.1.2281.10.9.7.1.1.12`
genEquipInterfacesPWCardExportClkSysRef Which card clock to provide as source towards system reference clock; FrontPanel takes the clock inserted into the front panel interface; ClockRecovery takes the clock recovered f…	column	Enumeration	`.1.3.6.1.4.1.2281.10.9.7.1.1.2`
genEquipInterfacesPWCardExportClkFrontPannel Which clock to export to the front panel clock; SysRefClk exports the system reference clock; ClockRecovery exports the clock recovered from the PW service mapped to the TDM port …	column	Enumeration	`.1.3.6.1.4.1.2281.10.9.7.1.1.3`
genEquipInterfacesPWCardExportClkSysRefCrPort TDM port serving as clock recovery reference if ExportClkSysRef is set to ClockRecovery.	column	Integer32	`.1.3.6.1.4.1.2281.10.9.7.1.1.4`
genEquipInterfacesPWCardExportClkFrontPanelCrPort TDM port serving as clock recovery reference if ExportClkFrontPannel is set to ClockRecovery.	column	Integer32	`.1.3.6.1.4.1.2281.10.9.7.1.1.5`
genEquipInterfacesPWCardFrontPanelClockSignalInput Configure the type of input clock signal of the front panel port. Sync is 2.048MHz/1.544MHz (differential sine/square 3.3V); e1t1 is a G.823/G.824 signal.	column	Enumeration	`.1.3.6.1.4.1.2281.10.9.7.1.1.6`
genEquipInterfacesPWCardFrontPanelClockSignalOutp Configure the type of output clock signal of the front panel port. Sync is 2.048MHz/1.544MHz (differential sine/square 3.3V); e1t1 is a G.823/G.824 signal.	column	Enumeration	`.1.3.6.1.4.1.2281.10.9.7.1.1.7`
genEquipInterfacesPWCardIpAddrUdpIpTraffic IP Address for UDP/IP encapsulated PWs.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.2281.10.9.7.1.1.8`
genEquipInterfacesPWCardIpSubnetUdpIpTraffic IP Subnet for UDP/IP encapsulated PWs.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.2281.10.9.7.1.1.9`