mplsLspInfoTimeUp
MPLS-MIB ·
.1.3.6.1.4.1.2636.3.2.5.1.6
Object
column
SNMPv2-TCTimeStamp
The total time in 10-millisecond units that this LSP has been operational. For example, the percentage up time can be determined by computing (mplsLspInfoTimeUp/mplsLspInfoAge * 100 %).
Context
- MIB
- MPLS-MIB
- OID
.1.3.6.1.4.1.2636.3.2.5.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mplsLspInfoEntry
- Table
- mplsLspInfoList
- Siblings
- 29
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsLspInfoName Name of the Label Switched Path. | column | OctetString | .1.3.6.1.4.1.2636.3.2.5.1.1 |
| mplsLspInfoPathChanges The number of path changes this LSP has had. For
every path change (path down, path up, path change),
a corresponding syslog/trap (if enabled) is generated
for it. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2636.3.2.5.1.10 |
| mplsLspInfoLastPathChange The time in 10-millisecond units since the last
change occurred on this LSP. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.2636.3.2.5.1.11 |
| mplsLspInfoConfiguredPaths The number of paths configured for this LSP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.2.5.1.12 |
| mplsLspInfoStandbyPaths The number of standby paths configured for
this LSP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.2.5.1.13 |
| mplsLspInfoOperationalPaths The number of operational paths for this LSP.
This includes the path currently active, as
well as operational standby paths. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.2.5.1.14 |
| mplsLspInfoFrom Source IP address of this LSP. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2636.3.2.5.1.15 |
| mplsLspInfoTo Destination IP address of this LSP. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2636.3.2.5.1.16 |
| mplsPathInfoName The name of the active path for this LSP, if
any. If there is none, the name should be
empty; in that case, the rest of the fields
in mplsLspInfoEntry are meaningless. | column | OctetString | .1.3.6.1.4.1.2636.3.2.5.1.17 |
| mplsPathInfoType The type of path that is active, i.e., a
primary path, a standby path, a generic
secondary path, or a bypass path.
The value other, primary, standby and
secondary apply to data LS… | column | Enumeration | .1.3.6.1.4.1.2636.3.2.5.1.18 |
| mplsPathInfoExplicitRoute The explicit route used to set up this LSP.
This may either be the route configured by
the user, or a route automatically computed
to satisfy constraints set by the user.
This f… | column | OctetString | .1.3.6.1.4.1.2636.3.2.5.1.19 |
| mplsLspInfoState The operational state of the LSP. | column | Enumeration | .1.3.6.1.4.1.2636.3.2.5.1.2 |
| mplsPathInfoRecordRoute The route actually used for this path, as
recorded by the signaling protocol.
This field is a displayable string in the
format of XXX.XXX.XXX.XXX <space>
repeated for each ad… | column | OctetString | .1.3.6.1.4.1.2636.3.2.5.1.20 |
| mplsPathInfoBandwidth The configured bandwidth for this LSP, in units
of thousands of bits per second (Kbps). This
field is meaningless unless mplsPathInfoName is not empty | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.2.5.1.21 |
| mplsPathInfoCOS The configured Class Of Service on this path. If
the value is between 0 and 7 inclusive, this value
will be inserted in the 3 bit COS field in the
label. If the value is 255, th… | column | Integer32 | .1.3.6.1.4.1.2636.3.2.5.1.22 |
| mplsPathInfoInclude This is a configured set of colors (administrative
groups) specified as a bit vector (i.e., bit n is 1
if color n is in the set, where n = 0 is the LSB).
For each link that this p… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.2.5.1.23 |
| mplsPathInfoExclude This is a configured set of colors (administrative
groups) specified as a bit vector (i.e., bit n is 1
if color n is in the set, where n = 0 is the LSB).
For each link that this p… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.2.5.1.24 |
| mplsPathInfoSetupPriority The setup priority configured for this path. This
field is meaningless unless mplsPathInfoName is not empty | column | Integer32 | .1.3.6.1.4.1.2636.3.2.5.1.25 |
| mplsPathInfoHoldPriority The hold priority configured for this path. This
field is meaningless unless mplsPathInfoName is not empty | column | Integer32 | .1.3.6.1.4.1.2636.3.2.5.1.26 |
| mplsPathInfoProperties The set of configured properties for this path,
expressed as a bit map. For example, if the path
is an adaptive path, the bit corresponding to bit
value xxx is set. This field is… | column | Enumeration | .1.3.6.1.4.1.2636.3.2.5.1.27 |
| mplsLspInfoAggrOctets The number of octets that have beeen forwarded over
current LSP. This is an aggregate count of octets
forwarded over all LSP instances from the time
LSP was up. The number reporte… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.2.5.1.28 |
| mplsLspInfoAggrPackets The number of packets that have been forwarded over
current LSP. This is an aggregate count of packets
forwarded over all LSP instances from the time
LSP was up. The number report… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.2.5.1.29 |
| mplsLspInfoOctets The number of octets that have been forwarded
over current LSP active path. The number reported
is not realtime, may subject to several minutes
delay. The delay is controllable b… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.2.5.1.3 |
| mplsPathInfoRecordRouteWithLabels The route actually used for this path, as
recorded by the signaling protocol.
This field is a displayable string in the
format of XXX.XXX.XXX.XXX <flag/label> <space>
repeated for… | column | OctetString | .1.3.6.1.4.1.2636.3.2.5.1.30 |
| mplsLspInfoPackets The number of packets that have been forwarded
over current LSP active path. The number reported
is not realtime, may subject to several minutes
delay. The delay is controllable … | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.2.5.1.4 |
| mplsLspInfoAge The age (i.e., time from creation till now) of
this LSP in 10-millisecond periods. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.2636.3.2.5.1.5 |
| mplsLspInfoPrimaryTimeUp The total time in 10-millisecond units that this
LSP's primary path has been operational. For
example, the percentage contribution of the primary
path to the operational time is … | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.2636.3.2.5.1.7 |
| mplsLspInfoTransitions The number of state transitions (up -> down and
down -> up) this LSP has undergone. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2636.3.2.5.1.8 |
| mplsLspInfoLastTransition The time in 10-millisecond units since the last
transition occurred on this LSP. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.2636.3.2.5.1.9 |