mplsLdpEntityOptionalParameters
MPLS-LDP-MIB ·
.1.3.6.1.3.97.1.2.2.1.21
Object
column
r/w
MplsLdpLabelTypes
Specifies the optional parameters for the LDP
Initialization Message. If the value is generic(1)
then no optional parameters will be sent in
the LDP Initialization message associated with
this Entity.
If the value is atmParameters(2) then
a row must be created in the mplsLdpEntityAtmParms
Table, which corresponds to this entry.
If the value is frameRelayParameters(3) then
a row must be created in the mplsLdpEntityFrameRelayParms
Table, which corresponds to this entry.
Context
- MIB
- MPLS-LDP-MIB
- OID
.1.3.6.1.3.97.1.2.2.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mplsLdpEntityEntry
- Table
- mplsLdpEntityTable
- Siblings
- 23
Syntax
MplsLdpLabelTypes
- Source
- MplsLdpLabelTypes
- Base type
Enumeration
Values & Constraints
Type Values
1 | generic |
2 | atm |
3 | frameRelay |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsLdpEntityLdpId The LDP identifier.
The first four octets encode an IP address
assigned to the LSR, and the last two octets
identify a specific label space within the
LSR. | column | MplsLdpIdentifier | .1.3.6.1.3.97.1.2.2.1.1 |
| mplsLdpEntityHelloHoldTimer The two octet value which is the proposed Hello hold
timer for this LDP Entity. A value of 0 means use the
default, which is 15 seconds for Link Hellos and 45
seconds for Targeted… | column | seconds Integer32 | .1.3.6.1.3.97.1.2.2.1.10 |
| mplsLdpEntityFailedInitSessionTrapEnable Indicates whether the
'mplsLdpFailedInitSessionThresholdExceeded'
trap should be generated.
If the value of this object is 'enabled(1)'
then the trap will generated… | column | Enumeration | .1.3.6.1.3.97.1.2.2.1.11 |
| mplsLdpEntityFailedInitSessionThreshold When attempting to establish a session with a
given Peer, the given LDP Entity should
send out the SNMP notification,
'mplsLdpFailedInitSessionThresholdExceeded', when
the number … | column | SNMPv2-SMIInteger32 | .1.3.6.1.3.97.1.2.2.1.12 |
| mplsLdpEntityLabelDistributionMethod For any given LDP session, the method of
label distribution must be specified. | column | Enumeration | .1.3.6.1.3.97.1.2.2.1.13 |
| mplsLdpEntityLabelRetentionMode The LDP Entity can be configured to use either
conservative or liberal label retention mode.
If the value of this object is conservative(1)
then advertized label ma… | column | Enumeration | .1.3.6.1.3.97.1.2.2.1.14 |
| mplsLdpEntityPVLimitMismatchTrapEnable Indicates whether the 'mplsLdpPathVectorLimitMismatch'
trap should be generated.
If the value of this object is 'enabled(1)'
then the trap will generated. If the v… | column | Enumeration | .1.3.6.1.3.97.1.2.2.1.15 |
| mplsLdpEntityPathVectorLimit If the value of this object is 0 (zero) then
Loop Dection for Path Vectors is disabled.
Otherwise, if this object has a value greater than
zero, then Loop Dection f… | column | Integer32 | .1.3.6.1.3.97.1.2.2.1.16 |
| mplsLdpEntityHopCountLimit If the value of this object is 0 (zero),
then Loop Detection using Hop Counters is
disabled.
If the value of this object is greater than
0 (zero) then Loop Detectio… | column | Integer32 | .1.3.6.1.3.97.1.2.2.1.17 |
| mplsLdpEntityTargetedPeer If this LDP entity uses targeted peer then set
this to true. | column | SNMPv2-TCTruthValue | .1.3.6.1.3.97.1.2.2.1.18 |
| mplsLdpEntityTargetedPeerAddrType The type of the internetwork layer address used for
the Extended Discovery. This object indicates how
the value of mplsLdpEntityTargetedPeerAddr is to
be interpreted. | column | IANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbers | .1.3.6.1.3.97.1.2.2.1.19 |
| mplsLdpEntityIndex This index is used as a secondary index to uniquely
identify this row. Before creating a row in this table,
the 'mplsLdpEntityIndexNext' object should be retrieved.
That value sh… | column | Unsigned32 | .1.3.6.1.3.97.1.2.2.1.2 |
| mplsLdpEntityTargetedPeerAddr The value of the internetwork layer address used for
the Extended Discovery. | column | MplsLdpGenAddr | .1.3.6.1.3.97.1.2.2.1.20 |
| mplsLdpEntityDiscontinuityTime The value of sysUpTime on the most recent occasion
at which any one or more of this entity's counters
suffered a discontinuity. The relevant counters are the
specific instances a… | column | SNMPv2-TCTimeStamp | .1.3.6.1.3.97.1.2.2.1.22 |
| mplsLdpEntityStorageType The storage type for this entry. | column | SNMPv2-TCStorageType | .1.3.6.1.3.97.1.2.2.1.23 |
| mplsLdpEntityRowStatus An object that allows entries in this table to
be created and deleted using the
RowStatus convention.
Once the 'mplsLdpEntityAdminStatus' object has
the value of 'up' and this obj… | column | SNMPv2-TCRowStatus | .1.3.6.1.3.97.1.2.2.1.24 |
| mplsLdpEntityProtocolVersion The version number of the protocol. The value of 0 on a
read indicates that the version of the protocol is unknown.
Otherwise, the value of this object represents the version
of … | column | SNMPv2-SMIInteger32 | .1.3.6.1.3.97.1.2.2.1.3 |
| mplsLdpEntityAdminStatus The administrative status of this LDP Entity.
If this object is changed from 'enable' to 'disable'
and this entity has already attempted to establish
contact with a Peer (which im… | column | Enumeration | .1.3.6.1.3.97.1.2.2.1.4 |
| mplsLdpEntityOperStatus The operational status of this LDP Entity. | column | Enumeration | .1.3.6.1.3.97.1.2.2.1.5 |
| mplsLdpEntityWellKnownTcpDiscoveryPort The well known TCP Discovery Port for
LDP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.3.97.1.2.2.1.6 |
| mplsLdpEntityWellKnownUdpDiscoveryPort The well known UDP Discovery Port for
LDP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.3.97.1.2.2.1.7 |
| mplsLdpEntityMaxPduLength The maximum PDU Length that is sent in
the Common Session Parameters of an Initialization
Message. A value of 255 or less specifies the
default maximum length of 4096 octets. | column | octets Unsigned32 | .1.3.6.1.3.97.1.2.2.1.8 |
| mplsLdpEntityKeepAliveHoldTimer The two octet value which is the proposed keep alive hold
timer for this LDP Entity. | column | seconds Integer32 | .1.3.6.1.3.97.1.2.2.1.9 |