mplsLdpEntityMaxPduLength
MPLS-LDP-MIB ·
.1.3.6.1.3.97.1.2.2.1.8
Object
column
r/w
octets Unsigned32
The maximum PDU Length that is sent in the Common Session Parameters of an Initialization Message. A value of 255 or less specifies the default maximum length of 4096 octets.
Context
- MIB
- MPLS-LDP-MIB
- OID
.1.3.6.1.3.97.1.2.2.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Units
- octets
- Parent
- mplsLdpEntityEntry
- Table
- mplsLdpEntityTable
- Siblings
- 23
Syntax
octets Unsigned32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsLdpEntityLdpId The LDP identifier.
The first four octets encode an IP address
assigned to the LSR, and the last two octets
identify a specific label space within the
LSR. | column | MplsLdpIdentifier | .1.3.6.1.3.97.1.2.2.1.1 |
| mplsLdpEntityHelloHoldTimer The two octet value which is the proposed Hello hold
timer for this LDP Entity. A value of 0 means use the
default, which is 15 seconds for Link Hellos and 45
seconds for Targeted… | column | seconds Integer32 | .1.3.6.1.3.97.1.2.2.1.10 |
| mplsLdpEntityFailedInitSessionTrapEnable Indicates whether the
'mplsLdpFailedInitSessionThresholdExceeded'
trap should be generated.
If the value of this object is 'enabled(1)'
then the trap will generated… | column | Enumeration | .1.3.6.1.3.97.1.2.2.1.11 |
| mplsLdpEntityFailedInitSessionThreshold When attempting to establish a session with a
given Peer, the given LDP Entity should
send out the SNMP notification,
'mplsLdpFailedInitSessionThresholdExceeded', when
the number … | column | SNMPv2-SMIInteger32 | .1.3.6.1.3.97.1.2.2.1.12 |
| mplsLdpEntityLabelDistributionMethod For any given LDP session, the method of
label distribution must be specified. | column | Enumeration | .1.3.6.1.3.97.1.2.2.1.13 |
| mplsLdpEntityLabelRetentionMode The LDP Entity can be configured to use either
conservative or liberal label retention mode.
If the value of this object is conservative(1)
then advertized label ma… | column | Enumeration | .1.3.6.1.3.97.1.2.2.1.14 |
| mplsLdpEntityPVLimitMismatchTrapEnable Indicates whether the 'mplsLdpPathVectorLimitMismatch'
trap should be generated.
If the value of this object is 'enabled(1)'
then the trap will generated. If the v… | column | Enumeration | .1.3.6.1.3.97.1.2.2.1.15 |
| mplsLdpEntityPathVectorLimit If the value of this object is 0 (zero) then
Loop Dection for Path Vectors is disabled.
Otherwise, if this object has a value greater than
zero, then Loop Dection f… | column | Integer32 | .1.3.6.1.3.97.1.2.2.1.16 |
| mplsLdpEntityHopCountLimit If the value of this object is 0 (zero),
then Loop Detection using Hop Counters is
disabled.
If the value of this object is greater than
0 (zero) then Loop Detectio… | column | Integer32 | .1.3.6.1.3.97.1.2.2.1.17 |
| mplsLdpEntityTargetedPeer If this LDP entity uses targeted peer then set
this to true. | column | SNMPv2-TCTruthValue | .1.3.6.1.3.97.1.2.2.1.18 |
| mplsLdpEntityTargetedPeerAddrType The type of the internetwork layer address used for
the Extended Discovery. This object indicates how
the value of mplsLdpEntityTargetedPeerAddr is to
be interpreted. | column | IANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbers | .1.3.6.1.3.97.1.2.2.1.19 |
| mplsLdpEntityIndex This index is used as a secondary index to uniquely
identify this row. Before creating a row in this table,
the 'mplsLdpEntityIndexNext' object should be retrieved.
That value sh… | column | Unsigned32 | .1.3.6.1.3.97.1.2.2.1.2 |
| mplsLdpEntityTargetedPeerAddr The value of the internetwork layer address used for
the Extended Discovery. | column | MplsLdpGenAddr | .1.3.6.1.3.97.1.2.2.1.20 |
| mplsLdpEntityOptionalParameters Specifies the optional parameters for the LDP
Initialization Message. If the value is generic(1)
then no optional parameters will be sent in
the LDP Initialization message associ… | column | MplsLdpLabelTypes | .1.3.6.1.3.97.1.2.2.1.21 |
| mplsLdpEntityDiscontinuityTime The value of sysUpTime on the most recent occasion
at which any one or more of this entity's counters
suffered a discontinuity. The relevant counters are the
specific instances a… | column | SNMPv2-TCTimeStamp | .1.3.6.1.3.97.1.2.2.1.22 |
| mplsLdpEntityStorageType The storage type for this entry. | column | SNMPv2-TCStorageType | .1.3.6.1.3.97.1.2.2.1.23 |
| mplsLdpEntityRowStatus An object that allows entries in this table to
be created and deleted using the
RowStatus convention.
Once the 'mplsLdpEntityAdminStatus' object has
the value of 'up' and this obj… | column | SNMPv2-TCRowStatus | .1.3.6.1.3.97.1.2.2.1.24 |
| mplsLdpEntityProtocolVersion The version number of the protocol. The value of 0 on a
read indicates that the version of the protocol is unknown.
Otherwise, the value of this object represents the version
of … | column | SNMPv2-SMIInteger32 | .1.3.6.1.3.97.1.2.2.1.3 |
| mplsLdpEntityAdminStatus The administrative status of this LDP Entity.
If this object is changed from 'enable' to 'disable'
and this entity has already attempted to establish
contact with a Peer (which im… | column | Enumeration | .1.3.6.1.3.97.1.2.2.1.4 |
| mplsLdpEntityOperStatus The operational status of this LDP Entity. | column | Enumeration | .1.3.6.1.3.97.1.2.2.1.5 |
| mplsLdpEntityWellKnownTcpDiscoveryPort The well known TCP Discovery Port for
LDP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.3.97.1.2.2.1.6 |
| mplsLdpEntityWellKnownUdpDiscoveryPort The well known UDP Discovery Port for
LDP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.3.97.1.2.2.1.7 |
| mplsLdpEntityKeepAliveHoldTimer The two octet value which is the proposed keep alive hold
timer for this LDP Entity. | column | seconds Integer32 | .1.3.6.1.3.97.1.2.2.1.9 |