mplsLdpEntityAtmStorageType
MPLS-LDP-MIB ·
.1.3.6.1.3.97.1.2.4.1.1.10
Object
The storage type for this entry.
Context
- MIB
- MPLS-LDP-MIB
- OID
.1.3.6.1.3.97.1.2.4.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mplsLdpEntityAtmParmsEntry
- Table
- mplsLdpEntityAtmParmsTable
- Siblings
- 10
Values & Constraints
Type Values
1 | other |
2 | volatile |
3 | nonVolatile |
4 | permanent |
5 | readOnly |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsLdpEntityAtmIfIndexOrZero This value represents either the InterfaceIndex of
the 'ifLayer' where the ATM Labels 'owned' by this
entry were created, or 0 (zero). The value of zero
means that the InterfaceI… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.3.97.1.2.4.1.1.1 |
| mplsLdpEntityAtmRowStatus An object that allows entries in this table to
be created and deleted using the
RowStatus convention.
NOTE: This RowStatus object should
have the same value of the… | column | SNMPv2-TCRowStatus | .1.3.6.1.3.97.1.2.4.1.1.11 |
| mplsLdpEntityAtmMergeCap Denotes the Merge Capability of this Entity. | column | Enumeration | .1.3.6.1.3.97.1.2.4.1.1.2 |
| mplsLdpEntityAtmLabelRangeComponents Number of LabelRange Components in the Initialization
message. This also represents the number of entries
in the mplsLdpLabelRangeComponentsTable which correspond
to this entry. | column | Unsigned32 | .1.3.6.1.3.97.1.2.4.1.1.3 |
| mplsLdpEntityAtmVcDirectionality If the value of this object is 'bidirectional(0)',
a given VCI, within a given VPI, is used as a
label for both directions independently.
If the value of this objec… | column | Enumeration | .1.3.6.1.3.97.1.2.4.1.1.4 |
| mplsLdpEntityAtmLsrConnectivity The peer LSR may be connected indirectly by means of an
ATM VP so that the VPI values may be different on either
endpoint so the label MUST be encoded entirely within the
VCI fiel… | column | Enumeration | .1.3.6.1.3.97.1.2.4.1.1.5 |
| mplsLdpEntityDefaultControlVpi The default VPI value for the non-MPLS connection. The
default value of this is 0 (zero) but other values may
be configured. This object allows a different value
to be configure… | column | ATM-TC-MIBAtmVpIdentifier | .1.3.6.1.3.97.1.2.4.1.1.6 |
| mplsLdpEntityDefaultControlVci The Default VCI value for a non-MPLS connection. The
default value of this is 32 but other values may be
configured. This object allows a different value to
be configured. | column | MplsAtmVcIdentifier | .1.3.6.1.3.97.1.2.4.1.1.7 |
| mplsLdpEntityUnlabTrafVpi VPI value of the VCC supporting unlabelled traffic. This
non-MPLS connection is used to carry unlabelled (IP)
packets. The default value is the same as the default
value of the … | column | ATM-TC-MIBAtmVpIdentifier | .1.3.6.1.3.97.1.2.4.1.1.8 |
| mplsLdpEntityUnlabTrafVci VCI value of the VCC supporting unlabelled traffic.
This non-MPLS connection is used to carry unlabelled (IP)
packets. The default value is the same as the default
value of the 'm… | column | MplsAtmVcIdentifier | .1.3.6.1.3.97.1.2.4.1.1.9 |