mplsLdpEntityAtmIfIndexOrZero
MPLS-LDP-MIB ·
.1.3.6.1.3.97.1.2.4.1.1.1
Object
This value represents either the InterfaceIndex of
the 'ifLayer' where the ATM Labels 'owned' by this
entry were created, or 0 (zero). The value of zero
means that the InterfaceIndex is not known. For example,
if the InterfaceIndex is created subsequent to the
ATM Label's creation, then it would not be known.
However, if the InterfaceIndex is known, then it must
be represented by this value.
If an InterfaceIndex becomes known, then the
network management entity (e.g. SNMP agent) responsible
for this object MUST change the value from 0 (zero) to the
value of the InterfaceIndex. If an ATM Label is
being used in forwarding data, then the value of this
object MUST be the InterfaceIndex.
Context
- MIB
- MPLS-LDP-MIB
- OID
.1.3.6.1.3.97.1.2.4.1.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mplsLdpEntityAtmParmsEntry
- Table
- mplsLdpEntityAtmParmsTable
- Siblings
- 10
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsLdpEntityAtmStorageType The storage type for this entry. | column | SNMPv2-TCStorageType | .1.3.6.1.3.97.1.2.4.1.1.10 |
| mplsLdpEntityAtmRowStatus An object that allows entries in this table to
be created and deleted using the
RowStatus convention.
NOTE: This RowStatus object should
have the same value of the… | column | SNMPv2-TCRowStatus | .1.3.6.1.3.97.1.2.4.1.1.11 |
| mplsLdpEntityAtmMergeCap Denotes the Merge Capability of this Entity. | column | Enumeration | .1.3.6.1.3.97.1.2.4.1.1.2 |
| mplsLdpEntityAtmLabelRangeComponents Number of LabelRange Components in the Initialization
message. This also represents the number of entries
in the mplsLdpLabelRangeComponentsTable which correspond
to this entry. | column | Unsigned32 | .1.3.6.1.3.97.1.2.4.1.1.3 |
| mplsLdpEntityAtmVcDirectionality If the value of this object is 'bidirectional(0)',
a given VCI, within a given VPI, is used as a
label for both directions independently.
If the value of this objec… | column | Enumeration | .1.3.6.1.3.97.1.2.4.1.1.4 |
| mplsLdpEntityAtmLsrConnectivity The peer LSR may be connected indirectly by means of an
ATM VP so that the VPI values may be different on either
endpoint so the label MUST be encoded entirely within the
VCI fiel… | column | Enumeration | .1.3.6.1.3.97.1.2.4.1.1.5 |
| mplsLdpEntityDefaultControlVpi The default VPI value for the non-MPLS connection. The
default value of this is 0 (zero) but other values may
be configured. This object allows a different value
to be configure… | column | ATM-TC-MIBAtmVpIdentifier | .1.3.6.1.3.97.1.2.4.1.1.6 |
| mplsLdpEntityDefaultControlVci The Default VCI value for a non-MPLS connection. The
default value of this is 32 but other values may be
configured. This object allows a different value to
be configured. | column | MplsAtmVcIdentifier | .1.3.6.1.3.97.1.2.4.1.1.7 |
| mplsLdpEntityUnlabTrafVpi VPI value of the VCC supporting unlabelled traffic. This
non-MPLS connection is used to carry unlabelled (IP)
packets. The default value is the same as the default
value of the … | column | ATM-TC-MIBAtmVpIdentifier | .1.3.6.1.3.97.1.2.4.1.1.8 |
| mplsLdpEntityUnlabTrafVci VCI value of the VCC supporting unlabelled traffic.
This non-MPLS connection is used to carry unlabelled (IP)
packets. The default value is the same as the default
value of the 'm… | column | MplsAtmVcIdentifier | .1.3.6.1.3.97.1.2.4.1.1.9 |