mplsFTNProtocol

MPLS-FTN-STD-MIB · .1.3.6.1.2.1.10.166.8.1.3.1.14
MIB view Table view

Object

column r/w Integer32 
The IP protocol to match against the IPv4 protocol
number or IPv6 Next-Header number in the packet. A
value of 255 means match all.  Note that the protocol
number of 255 is reserved by IANA, and Next-Header
number of 0 is used in IPv6.

Context

MIB
MPLS-FTN-STD-MIB
OID
.1.3.6.1.2.1.10.166.8.1.3.1.14
Type
column
Access
readwrite
Status
current
Parent
mplsFTNEntry
Table
mplsFTNTable
Siblings
17

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mplsFTNIndex
This is the unique index for a conceptual row in mplsFTNTable. To create a new conceptual row in mplsFTNTable a Network Management Application SHOULD retrieve the c…
columnMplsFTNEntryIndex.1.3.6.1.2.1.10.166.8.1.3.1.1
mplsFTNSourcePortMin
The lower end of the source port range.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.2.1.10.166.8.1.3.1.10
mplsFTNSourcePortMax
The higher end of the source port range
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.2.1.10.166.8.1.3.1.11
mplsFTNDestPortMin
The lower end of the destination port range.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.2.1.10.166.8.1.3.1.12
mplsFTNDestPortMax
The higher end of the destination port range.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.2.1.10.166.8.1.3.1.13
mplsFTNDscp
The contents of the DSCP field.
columnDIFFSERV-DSCP-TCDscp.1.3.6.1.2.1.10.166.8.1.3.1.15
mplsFTNActionType
The type of action to be taken on packets matching this FTN entry.
columnEnumeration.1.3.6.1.2.1.10.166.8.1.3.1.16
mplsFTNActionPointer
If mplsFTNActionType is redirectLsp(1), then this object MUST contain zeroDotZero or point to a instance of mplsXCEntry indicating the LSP to redirect matching packets to. …
columnSNMPv2-TCRowPointer.1.3.6.1.2.1.10.166.8.1.3.1.17
mplsFTNStorageType
The storage type for this FTN entry. Conceptual rows having the value 'permanent' need not allow write- access to any columnar objects in the row.
columnSNMPv2-TCStorageType.1.3.6.1.2.1.10.166.8.1.3.1.18
mplsFTNRowStatus
Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a…
columnSNMPv2-TCRowStatus.1.3.6.1.2.1.10.166.8.1.3.1.2
mplsFTNDescr
The description of this FTN entry. Since the index for this table has no particular significance or meaning, this object should contain some meaningful text that an operator could…
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.2.1.10.166.8.1.3.1.3
mplsFTNMask
This bit map indicates which of the fields described next, namely source address range, destination address range, source port range, destination port range, IPv4 Protocol field o…
columnBits.1.3.6.1.2.1.10.166.8.1.3.1.4
mplsFTNAddrType
This object determines the type of address contained in the source and destination address objects (mplsFTNSourceAddrMin, mplsFTNSourceAddrMax, mplsFTNDestAddrMin and mplsFTNDestA…
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.2.1.10.166.8.1.3.1.5
mplsFTNSourceAddrMin
The lower end of the source address range. The type of this object is determined by the corresponding mplsFTNAddrType object.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.2.1.10.166.8.1.3.1.6
mplsFTNSourceAddrMax
The upper end of the source address range. The type of this object is determined by the corresponding mplsFTNAddrType object.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.2.1.10.166.8.1.3.1.7
mplsFTNDestAddrMin
The lower end of the destination address range. The type of this object is determined by the corresponding mplsFTNAddrType object.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.2.1.10.166.8.1.3.1.8
mplsFTNDestAddrMax
The higher end of the destination address range. The type of this object is determined by the corresponding mplsFTNAddrType object.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.2.1.10.166.8.1.3.1.9