mplsFrrFacilityDBProtectingTunnelResvBw

MPLS-FRR-FACILITY-STD-MIB · .1.3.6.1.2.1.204.1.7.1.11
MIB view Table view

Object

column kilobits per second MPLS-TC-STD-MIBMplsBitRate 
Specifies the amount of bandwidth in units
of '1,000 bits per second', actually reserved by
the protecting tunnel for facility backup purposes.
This value is repeated here from the MPLS-TE-STD-MIB
module because the tunnel entry will reveal the
bandwidth reserved by the signaling protocol, which is
typically 0 for backup tunnels so as to not over-book
bandwidth.  However, internal reservations are
typically made on the PLR; thus, this value should be
revealed here, as it is often different from
mplsTunnelResourceMeanRate found in the MPLS-TE-STD-MIB
module.

Context

MIB
MPLS-FRR-FACILITY-STD-MIB
OID
.1.3.6.1.2.1.204.1.7.1.11
Type
column
Access
readonly
Status
current
Units
kilobits per second
Parent
mplsFrrFacilityDBEntry
Table
mplsFrrFacilityDBTable
Siblings
10

Syntax

kilobits per second MPLS-TC-STD-MIBMplsBitRate
Source
MPLS-TC-STD-MIBMplsBitRate
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mplsFrrFacilityProtectedIfIndex
Uniquely identifies the interface configured for FRR protection. If this object is set to 0, this indicates that the remaining indexing combinations for this row apply to all int…
columnIF-MIBInterfaceIndex.1.3.6.1.2.1.204.1.7.1.1
mplsFrrFacilityDBProtectingTunnelStatus
Specifies the state of the protecting tunnel as specified by mplsFrrFacilityProtectingTunnelIndex. active - This tunnel's label has been placed in the LF…
columnEnumeration.1.3.6.1.2.1.204.1.7.1.10
mplsFrrFacilityProtectingTunnelIndex
Uniquely identifies the mplsTunnelEntry primary index for the tunnel head interface designated to protect the interface as specified in the mplsFrrFacilityProtectedIfIndex (and al…
columnMPLS-TC-STD-MIBMplsTunnelIndex.1.3.6.1.2.1.204.1.7.1.2
mplsFrrFacilityBackupTunnelIndex
Uniquely identifies the mplsTunnelEntry primary index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex.
columnMPLS-TC-STD-MIBMplsTunnelIndex.1.3.6.1.2.1.204.1.7.1.3
mplsFrrFacilityBackupTunnelInstance
Uniquely identifies the mplsTunnelEntry secondary index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex.
columnMPLS-TC-STD-MIBMplsTunnelInstanceIndex.1.3.6.1.2.1.204.1.7.1.4
mplsFrrFacilityBackupTunnelIngressLSRId
Uniquely identifies the mplsTunnelEntry third index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex.
columnMPLS-TC-STD-MIBMplsLsrIdentifier.1.3.6.1.2.1.204.1.7.1.5
mplsFrrFacilityBackupTunnelEgressLSRId
Uniquely identifies the mplsTunnelEntry fourth index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex.
columnMPLS-TC-STD-MIBMplsLsrIdentifier.1.3.6.1.2.1.204.1.7.1.6
mplsFrrFacilityDBNumProtectingTunnelOnIf
The number of backup tunnels protecting the interface specified by mplsFrrFacilityProtectedIfIndex.
columnSNMPv2-SMIGauge32.1.3.6.1.2.1.204.1.7.1.7
mplsFrrFacilityDBNumProtectedLspOnIf
The number of LSPs currently being protected on the interface specified by mplsFrrFacilityProtectedIfIndex.
columnSNMPv2-SMIGauge32.1.3.6.1.2.1.204.1.7.1.8
mplsFrrFacilityDBNumProtectedTunnels
The number of tunnels protected on the interface specified by mplsFrrFacilityProtectedIfIndex.
columnSNMPv2-SMIGauge32.1.3.6.1.2.1.204.1.7.1.9