tcpServerEntry

MOXA-IAW5x50A_IO-MIB · .1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1

MIB view Table view

Object

row

The TCP server mode entry.

Context

MIB: MOXA-IAW5x50A_IO-MIB
OID: .1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1
Type: row
Status: current
Parent: tcpServerTable
Table: tcpServerTable
Children: 9

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
tcpServerTcpAliveCheck The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection is idle. 1 to 99 min: The NPort IAW5x50A_IO series device server automatically closes th…	column	Integer32	`.1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1.1`
tcpServerInactivityTime 0 ms: TCP connection is not closed when the serial line is idle. 1-65535 ms: The NPort IAW5x50A_IO series device server automatically closes the TCP connection if there is no seri…	column	Integer32	`.1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1.2`
tcpServerMaxConnection Max connection is usually used when the user needs to receive data from different hosts simultaneously. The factory default is 1. In this case, only one specific host can access t…	column	Integer32	`.1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1.3`
tcpServerIgnoreJammedIp Previously, when Max connection was set to a value greater than 1, and the serial device was transmitting data, if any one of the connected hosts stopped responding, the serial de…	column	Enumeration	`.1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1.4`
tcpServerAllowDriverControl If Max connection is greater than 1, NPort will ignore driver control commands from all connected hosts. However, if you set Allow driver control to YES, control commands will be …	column	Enumeration	`.1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1.5`
tcpServerTcpPort The 'TCP port' is the TCP port that the NPort IAW5x50A_IO series device server uses to listen to connections, and that other devices must use to contact the NPort IAW5x50A_IO ser…	column	Integer32	`.1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1.6`
tcpServerCmdPort The 'Command port' is a TCP port used to listen for SSDK commands from the host. In order to prevent a TCP port conflict with other applications, the user can set the Command por…	column	Integer32	`.1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1.7`
tcpServerConnectionDownRTS For some applications, serial devices must obtain the Ethernet link status from the RTS signal sent by the NPort IAW5x50A_IO series device server. If this setting is set to 'goes …	column	Enumeration	`.1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1.8`
tcpServerConnectionDownDTR For some applications, serial devices must obtain the Ethernet link status from the DTR signal sent by the NPort IAW5x50A_IO series device server. If this setting is set to 'goes …	column	Enumeration	`.1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1.9`

Indexes