upsWellKnownAlarms
MITSUBISHI-UPS-MIB ·
.0.13891.101.6.3
Object
node
No description available.
Context
- MIB
- MITSUBISHI-UPS-MIB
- OID
.0.13891.101.6.3- Type
- node
- Parent
- upsAlarm
- Siblings
- 4
- Children
- 24
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| upsAlarmsPresent mandatory The present number of active alarm conditions. | scalar | RFC1155-SMIGauge | .0.13891.101.6.1 |
| upsAlarmTable mandatory A list of alarm table entries. Alarms are named by
an OBJECT IDENTIFIER, upsAlarmDescr, to allow a single
table to reflect well known alarms plus alarms defined
by a particula… | table | - | .0.13891.101.6.2 |
| upsAlarmID mandatory A unique identifier for an alarm condition. This
value must remain constant. | scalar | Integer32 | .0.13891.101.6.4 |
| upsAlarmDESCR mandatory A reference to an alarm description object. The object
references should not be accessible, but rather be used
to provide a unique description of the alarm condition. | scalar | OctetString | .0.13891.101.6.5 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| upsAlarmBatteryBad mandatory One or more batteries have been determined to require
replacement. | scalar | Integer32 | .0.13891.101.6.3.1 |
| upsAlarmBypassBad mandatory The Bypass is out of tolerance. | scalar | Integer32 | .0.13891.101.6.3.10 |
| upsAlarmOutputOffAsRequested mandatory The UPS has shut down as requested, i.e., the output
is off. | scalar | Integer32 | .0.13891.101.6.3.11 |
| upsAlarmUpsOffAsRequested mandatory The entire UPS has shutdown as commanded. | scalar | Integer32 | .0.13891.101.6.3.12 |
| upsAlarmChargerFailed mandatory An uncorrected problem has been detected within the
UPS charger subsystem. | scalar | Integer32 | .0.13891.101.6.3.13 |
| upsAlarmUpsOutputOff mandatory The output of the UPS is in the off state. | scalar | Integer32 | .0.13891.101.6.3.14 |
| upsAlarmUpsSystemOff mandatory The UPS system is in the off state. | scalar | Integer32 | .0.13891.101.6.3.15 |
| upsAlarmFanFailure mandatory The failure of one or more fans in the UPS has been
detected. | scalar | Integer32 | .0.13891.101.6.3.16 |
| upsAlarmFuseFailure mandatory The failure of one or more fuses has been detected. | scalar | Integer32 | .0.13891.101.6.3.17 |
| upsAlarmGeneralFault mandatory A general fault in the UPS has been detected. | scalar | Integer32 | .0.13891.101.6.3.18 |
| upsAlarmDiagnosticTestFailed mandatory The result of the last diagnostic test indicates a
failure. | scalar | Integer32 | .0.13891.101.6.3.19 |
| upsAlarmOnBattery mandatory The UPS is drawing power from the batteries. | scalar | Integer32 | .0.13891.101.6.3.2 |
| upsAlarmCommunicationsLost mandatory A problem has been encountered in the
communications between the agent and the UPS. | scalar | Integer32 | .0.13891.101.6.3.20 |
| upsAlarmAwaitingPower mandatory The UPS output is off and the UPS is awaiting the
return of input power. | scalar | Integer32 | .0.13891.101.6.3.21 |
| upsAlarmShutdownPending mandatory A upsShutdownAfterDelay countdown is underway. | scalar | Integer32 | .0.13891.101.6.3.22 |
| upsAlarmShutdownImminent mandatory The UPS will turn off power to the load in less than
5 seconds; this may be either a timed shutdown or a
low battery shutdown. | scalar | Integer32 | .0.13891.101.6.3.23 |
| upsAlarmTestInProgress mandatory A test is in progress, as initiated and indicated by
the Test Group. Tests initiated via other
implementation-specific mechanisms can indicate the
presence of the testing in the … | scalar | Integer32 | .0.13891.101.6.3.24 |
| upsAlarmLowBattery mandatory The remaining battery run-time is less than or equal
to upsConfigLowBattTime. | scalar | Integer32 | .0.13891.101.6.3.3 |
| upsAlarmDepletedBattery mandatory The UPS will be unable to sustain the present load
when and if the utility power is lost. | scalar | Integer32 | .0.13891.101.6.3.4 |
| upsAlarmTempBad mandatory A temperature is out of tolerance. | scalar | Integer32 | .0.13891.101.6.3.5 |
| upsAlarmInputBad mandatory An input condition is out of tolerance. | scalar | Integer32 | .0.13891.101.6.3.6 |
| upsAlarmOutputBad mandatory An output condition (other than OutputOverload) is
out of tolerance. | scalar | Integer32 | .0.13891.101.6.3.7 |
| upsAlarmOutputOverload mandatory The output load exceeds the UPS output capacity. | scalar | Integer32 | .0.13891.101.6.3.8 |
| upsAlarmOnBypass mandatory The Bypass is presently engaged on the UPS. | scalar | Integer32 | .0.13891.101.6.3.9 |