mefSoamLmHistoryStatsIndex
MEF-SOAM-PM-MIB ·
.1.3.6.1.4.1.15007.1.3.1.2.6.1.1
Object
column
SNMPv2-SMIUnsigned32
The index for the Measurement Interval within this
PM session.
Measurement Interval indexes are assigned sequentially by
the SNMP Agent. The first Measurement Interval that occurs after
the session is started is assigned index 1. Measurement Intervals
for FLR (stored in this table) are based on
mefSoamLmCfgMeasurementInterval and are indexed independently
of Measurement Intervals for availability (stored in
mefSoamLmHistoryAvailStatsTable).
Referential integrity is necessary, i.e., the index needs to be
persistent upon a reboot or restart of a device. The index
is never reused while this session is active until it wraps to zero.
The index value keeps increasing up to that time.
Context
- MIB
- MEF-SOAM-PM-MIB
- OID
.1.3.6.1.4.1.15007.1.3.1.2.6.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- mefSoamLmHistoryStatsEntry
- Table
- mefSoamLmHistoryStatsTable
- Siblings
- 15
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mefSoamLmHistoryStatsBackwardTransmittedFrames This object contains the number of frames transmitted in the
backward direction by this MEP.
For a PM Session of type lmLmm and lmCcm this includes Ethernet
Servic… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.15007.1.3.1.2.6.1.10 |
| mefSoamLmHistoryStatsBackwardReceivedFrames This object contains the number of frames received in the
backward direction by this MEP.
For a PM Session of type lmLmm and lmCcm this includes Ethernet
Service … | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.15007.1.3.1.2.6.1.11 |
| mefSoamLmHistoryStatsBackwardMinFlr This object contains the minimum one-way frame loss
ratio in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is express… | column | milli-percent Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.6.1.12 |
| mefSoamLmHistoryStatsBackwardMaxFlr This object contains the maximum one-way frame loss
ratio in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is express… | column | milli-percent Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.6.1.13 |
| mefSoamLmHistoryStatsBackwardAvgFlr This object contains the average one-way frame loss
ratio in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is express… | column | milli-percent Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.6.1.14 |
| mefSoamLmHistoryStatsSoamPdusSent This object contains the count of the number of SOAM PDUs sent
during this Measurement Interval.
This object applies when mefSoamLmCfgType is lmLmm, lmSlm,
or lmC… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.15007.1.3.1.2.6.1.15 |
| mefSoamLmHistoryStatsSoamPdusReceived This object contains the count of the number of SOAM
PDUs received in this Measurement Interval.
This object applies when mefSoamLmCfgType is lmLmm, lmSlm,
or lmCc… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.15007.1.3.1.2.6.1.16 |
| mefSoamLmHistoryStatsEndTime The time that the Measurement Interval ended. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.15007.1.3.1.2.6.1.2 |
| mefSoamLmHistoryStatsElapsedTime The length of time that the Measurement Interval ran for,
in 0.01 seconds. | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.15007.1.3.1.2.6.1.3 |
| mefSoamLmHistoryStatsSuspect Whether the Measurement Interval has been marked as suspect.
The object is set to true when there is a discontinuity in the
performance measurements during the Mea… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15007.1.3.1.2.6.1.4 |
| mefSoamLmHistoryStatsForwardTransmittedFrames This object contains the number of frames transmitted in the
forward direction by this MEP.
For a PM Session of types lmLmm and lmCcm this includes Ethernet
Serv… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.15007.1.3.1.2.6.1.5 |
| mefSoamLmHistoryStatsForwardReceivedFrames This object contains the number of frames received in the
forward direction by this MEP.
For a PM Session of types lmLmm and lmCcm this includes Ethernet
Service … | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.15007.1.3.1.2.6.1.6 |
| mefSoamLmHistoryStatsForwardMinFlr This object contains the minimum one-way frame loss
ratio in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is expressed… | column | milli-percent Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.6.1.7 |
| mefSoamLmHistoryStatsForwardMaxFlr This object contains the maximum one-way frame loss
ratio in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is expressed… | column | milli-percent Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.6.1.8 |
| mefSoamLmHistoryStatsForwardAvgFlr This object contains the average one-way frame loss
ratio in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is expressed… | column | milli-percent Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.2.6.1.9 |