mefSoamDmCfgRelativeStartTime
MEF-SOAM-PM-MIB ·
.1.3.6.1.4.1.15007.1.3.1.3.1.1.20
Object
This object specifies the relative start time, from
the current system time, for the SOAM DM session. This
object is used only if mefSoamDmStartTimeType is 'relative'
and is ignored otherwise.
This object can only be written at row creation time and cannot be
modified once it has been created.
Context
- MIB
- MEF-SOAM-PM-MIB
- OID
.1.3.6.1.4.1.15007.1.3.1.3.1.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mefSoamDmCfgEntry
- Table
- mefSoamDmCfgTable
- Siblings
- 33
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mefSoamDmCfgIndex An index to the Delay Measurement Configuration table which indicates
the specific measurement session for the MEP.
mefSoamPmMepOperNextIndex needs to be inspected … | column | Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.3.1.1.1 |
| mefSoamDmCfgTestTlvIncluded Indicates whether a Test TLV or Data TLV is included when the size
of the DM frame is determined by the mefSoamDmFrameSize object.
A value of 'true' indicates that the Test TLV is… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15007.1.3.1.3.1.1.10 |
| mefSoamDmCfgTestTlvPattern This object specifies the type of test pattern to be
sent in the DM frame Test TLV when the size
of DM PDU is determined by the mefSoamDmFrameSize object and
mefSoamDmTestTlvIncl… | column | MEF-SOAM-TC-MIBMefSoamTcTestPatternType | .1.3.6.1.4.1.15007.1.3.1.3.1.1.11 |
| mefSoamDmCfgMeasurementInterval This object specifies a Measurement Interval in minutes.
A Measurement Interval 15 minutes needs to be supported, other intervals
may be supported.
T… | column | minutes Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.3.1.1.12 |
| mefSoamDmCfgNumIntervalsStored This object specifies the number of completed Measurement Intervals
to store in the history statistic table.
At least 32 completed Measurement Intervals are to be s… | column | Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.3.1.1.13 |
| mefSoamDmCfgDestMacAddress The Target or Destination MAC Address Field to be transmitted.
If mefSoamDmCfgType is 'dmDmm', the destination address is to be the
unicast address of the destinat… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.15007.1.3.1.3.1.1.14 |
| mefSoamDmCfgDestMepId The Maintenance Association End Point Identifier of
another MEP in the same Maintenance Association to which
the SOAM DM frame is to be sent.
This address will be u… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.15007.1.3.1.3.1.1.15 |
| mefSoamDmCfgDestIsMepId A value of 'true' indicates that MEPID of the target MEP is used for
SOAM DM frame transmission.
A value of 'false' indicates that the destination MAC address of th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15007.1.3.1.3.1.1.16 |
| mefSoamDmCfgSourceMacAddress The Source MAC Address Field of the received SOAM DM session PDUs.
If mefSoamDmCfgType is dm1DmRx this object indicates the source
address of the dm1DmTx DM session… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.15007.1.3.1.3.1.1.17 |
| mefSoamDmCfgStartTimeType This object specifies the type of start time of the SOAM DM
session. The start time can be disabled (none), immediate, relative,
or fixed.
The value of 'none' is il… | column | MEF-SOAM-TC-MIBMefSoamTcOperationTimeType | .1.3.6.1.4.1.15007.1.3.1.3.1.1.18 |
| mefSoamDmCfgFixedStartDateAndTime This object specifies the fixed start date/time for the
SOAM Delay Measurement session. This object is used only used if
mefSoamDmStartTimeType is 'fixed' and is ignored otherwi… | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.15007.1.3.1.3.1.1.19 |
| mefSoamDmCfgType This object indicates what type of Delay Measurement is to
be performed.
dmDmm(1) DMM SOAM PDU generated, DMR responses received
(one-way … | column | Enumeration | .1.3.6.1.4.1.15007.1.3.1.3.1.1.2 |
| mefSoamDmCfgStopTimeType This object specifies the type of stop time to terminate the
SOAM DM session. The stop time can be forever (none), relative, or
fixed.
The value of 'none' indicate… | column | MEF-SOAM-TC-MIBMefSoamTcOperationTimeType | .1.3.6.1.4.1.15007.1.3.1.3.1.1.21 |
| mefSoamDmCfgFixedStopDateAndTime This object specifies the fixed stop date/time for the
SOAM Delay Measurement session. This object is used only used
if mefSoamDmStopTimeType is 'fixed' and is ignored otherwise… | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.15007.1.3.1.3.1.1.22 |
| mefSoamDmCfgRelativeStopTime This object specifies the relative stop time, from the
session start time, to stop the SOAM DM session. This
object is used only if mefSoamDmStopTimeType is 'relative' and is
ig… | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.15007.1.3.1.3.1.1.23 |
| mefSoamDmCfgRepetitionTime This object specifies a configurable repetition time between
Measurement Intervals in a Delay Measurement session in seconds.
If the value is 0 (none), there is no… | column | seconds Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.3.1.1.24 |
| mefSoamDmCfgAlignMeasurementIntervals This object specifies whether the Measurement Intervals for
the Delay Measurement session are aligned with a zero offset to
real time.
The value 'true' indicates th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15007.1.3.1.3.1.1.25 |
| mefSoamDmCfgAlignMeasurementOffset This object specifies the offset in minutes from the time of day value
if mefSoamDmCfgAlignMeasurementIntervals is 'true' and the repetition
time is a factor of 60 minutes. If n… | column | minutes Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.3.1.1.26 |
| mefSoamDmCfgNumMeasBinsPerFrameDelayInterval This object specifies the number of measurement bins
per Measurement Interval for Frame Delay measurements.
At least 3 bins are to be supported; at least 10 bins … | column | Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.3.1.1.27 |
| mefSoamDmCfgNumMeasBinsPerInterFrameDelayVariationInterval This object specifies the number of measurement bins
per Measurement Interval for Inter-Frame Delay Variation
measurements.
The minimum number of measurement bin… | column | Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.3.1.1.28 |
| mefSoamDmCfgInterFrameDelayVariationSelectionOffset This object specifies the selection offset for
Inter-Frame Delay Variation measurements. If this value
is set to n, then the IFDV is calculated by taking the
difference in fra… | column | Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.3.1.1.29 |
| mefSoamDmCfgVersion This object indicates the version of the PDUs used to perform
Delay Measurement.
Version 0 indicates the PDU formats defined in Y.1731-2008.
Version 1 indicates th… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.15007.1.3.1.3.1.1.3 |
| mefSoamDmCfgNumMeasBinsPerFrameDelayRangeInterval This object specifies the number of measurement bins
per Measurement Interval for Frame Delay Range measurements.
At least 2 bins are to be supported; at least 10… | column | Unsigned32 | .1.3.6.1.4.1.15007.1.3.1.3.1.1.30 |
| mefSoamDmCfgSessionType This object indicates whether the current session is defined to
be 'Proactive' or 'On-Demand'. A value of 'proactive'
indicates the current session is 'Proactive'. A value of 'onD… | column | MEF-SOAM-TC-MIBMefSoamTcSessionType | .1.3.6.1.4.1.15007.1.3.1.3.1.1.31 |
| mefSoamDmCfgSessionStatus This object indicates the current status of the DM session. A value
of 'active' indicates the current DM session is active, i.e. the current
time lies between the start time and t… | column | MEF-SOAM-TC-MIBMefSoamTcStatusType | .1.3.6.1.4.1.15007.1.3.1.3.1.1.32 |
| mefSoamDmCfgHistoryClear This object when written clears the Delay Measurement history
tables (mefSoamDmHistoryStatsTable and mefSoamDmHistoryStatsBinsTable)
- all rows are deleted. When read the value a… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15007.1.3.1.3.1.1.33 |
| mefSoamDmCfgRowStatus The status of the row.
The writable columns in a row cannot be changed if the row
is active, except for mefSoamDmCfgEnabled and mefSoamDmCfgHistoryClear
objects. Al… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.15007.1.3.1.3.1.1.34 |
| mefSoamDmCfgEnabled This object specifies whether the Delay Measurement session is
enabled.
The value 'true' indicates the Delay Measurement session is enabled AND
SOAM PDUs are sent … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15007.1.3.1.3.1.1.4 |
| mefSoamDmCfgMeasurementEnable A vector of bits that indicates the type of SOAM DM counters that
are enabled.
A bit set to '1' enables the specific SOAM DM counter.
A bit set to '… | column | Bits | .1.3.6.1.4.1.15007.1.3.1.3.1.1.5 |
| mefSoamDmCfgMessagePeriod This object specifies the interval between Delay Measurement
OAM message transmission. For Delay Measurement monitoring
applications, the default value is 100ms.
… | column | ms MEF-SOAM-TC-MIBMefSoamTcMeasurementPeriodType | .1.3.6.1.4.1.15007.1.3.1.3.1.1.6 |
| mefSoamDmCfgPriority This object specifies the priority of frames with
Delay Measurement OAM message information.
The default value is to be the value which yields the lowest frame
lo… | column | IEEE8021-TC-MIBIEEE8021PriorityValue | .1.3.6.1.4.1.15007.1.3.1.3.1.1.7 |
| mefSoamDmCfgFrameSize This object specifies the Delay Measurement frame size between
64 bytes and the maximum transmission unit of the EVC.
The range of frame sizes from 64 through 2000… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.15007.1.3.1.3.1.1.8 |
| mefSoamDmCfgDataPattern This object specifies the DM data pattern included in a Data TLV
when the size of the DM frame is determined by the
mefSoamDmFrameSize object and mefSoamDmTestTlvIncluded is 'fal… | column | MEF-SOAM-TC-MIBMefSoamTcDataPatternType | .1.3.6.1.4.1.15007.1.3.1.3.1.1.9 |