me1200ConfigLmRxEnable
ME1200-MEP-MIB ·
.1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.9
Object
This enables calculation of far-to-near loss when CCM/LMM/SLM/1SL is received. Can only be set TRUE when 'enable' is FALSE
Context
- MIB
- ME1200-MEP-MIB
- OID
.1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- me1200ConfigLmEntry
- Table
- me1200ConfigLmTable
- Siblings
- 14
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| me1200ConfigLmId The MEP instance ID | column | Integer32 | .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.1 |
| me1200ConfigLmSynthetic TRUE => LM based on synthetic frames (SLM/1SL). FALSE => LM based on
service frames (LMM/CCM). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.10 |
| me1200ConfigLmAction Action | column | ME1200-TCME1200RowEditorState | .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.101 |
| me1200ConfigLmMep Peer Mep to receive LM - only used if unicast. Value >
VTSS_APPL_MEP_ID_MAX can be used when only one peer-mep (default). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.11 |
| me1200ConfigLmFrameSize Size of SLM/1SL frame to send. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.12 |
| me1200ConfigLmMeasInterval Synthetic LM measurement interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.13 |
| me1200ConfigLmSlmTestId Test ID value to use in SLM PDUs. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.14 |
| me1200ConfigLmEnded Dual/single ended selection. CCM or LMM/LMR based. Cannot be changed
after creation. | column | ME1200Ended | .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.2 |
| me1200ConfigLmDei Drop Eligibility Indicator of transmitted LM PDU | column | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.3 |
| me1200ConfigLmPrio Priority of the transmitted LM PDU. Range 0 to 7 | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.4 |
| me1200ConfigLmRate LM PDU transmission rate | column | ME1200-TCME1200MepTxRate | .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.5 |
| me1200ConfigLmCast Uni/Multicast selection - on CCM based LM only multicast is possible | column | ME1200Cast | .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.6 |
| me1200ConfigLmFlrInterval Frame loss ratio time interval in sec. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.7 |
| me1200ConfigLmLossRatioThreshold Frame loss ratio threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.8 |