me1200ConfigLmMep

ME1200-MEP-MIB · .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.11

MIB view Table view

Object

column r/w SNMPv2-SMIUnsigned32

Peer Mep to receive LM - only used if unicast. Value >
VTSS_APPL_MEP_ID_MAX can be used when only one peer-mep (default).

Context

MIB: ME1200-MEP-MIB
OID: .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.11
Type: column
Access: readwrite
Status: current
Parent: me1200ConfigLmEntry
Table: me1200ConfigLmTable
Siblings: 14

Syntax

SNMPv2-SMIUnsigned32

Source: SNMPv2-SMIUnsigned32
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
me1200ConfigLmId The MEP instance ID	column	Integer32	`.1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.1`
me1200ConfigLmSynthetic TRUE => LM based on synthetic frames (SLM/1SL). FALSE => LM based on service frames (LMM/CCM).	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.10`
me1200ConfigLmAction Action	column	ME1200-TCME1200RowEditorState	`.1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.101`
me1200ConfigLmFrameSize Size of SLM/1SL frame to send.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.12`
me1200ConfigLmMeasInterval Synthetic LM measurement interval.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.13`
me1200ConfigLmSlmTestId Test ID value to use in SLM PDUs.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.14`
me1200ConfigLmEnded Dual/single ended selection. CCM or LMM/LMR based. Cannot be changed after creation.	column	ME1200Ended	`.1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.2`
me1200ConfigLmDei Drop Eligibility Indicator of transmitted LM PDU	column	ME1200-TCME1200Unsigned8	`.1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.3`
me1200ConfigLmPrio Priority of the transmitted LM PDU. Range 0 to 7	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.4`
me1200ConfigLmRate LM PDU transmission rate	column	ME1200-TCME1200MepTxRate	`.1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.5`
me1200ConfigLmCast Uni/Multicast selection - on CCM based LM only multicast is possible	column	ME1200Cast	`.1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.6`
me1200ConfigLmFlrInterval Frame loss ratio time interval in sec.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.7`
me1200ConfigLmLossRatioThreshold Frame loss ratio threshold.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.8`
me1200ConfigLmRxEnable This enables calculation of far-to-near loss when CCM/LMM/SLM/1SL is received. Can only be set TRUE when 'enable' is FALSE	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.9`