mbgMDUOutputStatus
MBG-SNMP-RSC-MDU-MIB ·
.1.3.6.1.4.1.5597.80.1.9
Object
scalar
Enumeration
Current state of outputs (0=outputs disabled, 1=outputs enabled)
Context
- MIB
- MBG-SNMP-RSC-MDU-MIB
- OID
.1.3.6.1.4.1.5597.80.1.9- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- mbgMDU
- Siblings
- 30
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | outputsDisabled |
1 | outputsEnabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mbgMDUType Type of clock | scalar | - | .1.3.6.1.4.1.5597.80.1.1 |
| mbgMDUACOMode Current state of ACO (access control override)
0: ACO mode off (no firmware updates, password protection and encryption on)
1: ACO mode on (firmware updates possible, password set… | scalar | Enumeration | .1.3.6.1.4.1.5597.80.1.10 |
| mbgMDUPowerSupply1 Current status of power supply 1
0: notOK
1: OK | scalar | Enumeration | .1.3.6.1.4.1.5597.80.1.11 |
| mbgMDUPowerSupply2 Current status of power supply 2
0: notOK
1: OK | scalar | Enumeration | .1.3.6.1.4.1.5597.80.1.12 |
| mbgMDUPowerSupply3 Current status of power supply 3
0: notOK
1: OK | scalar | Enumeration | .1.3.6.1.4.1.5597.80.1.13 |
| mbgMDUPowerSupply4 Current status of power supply 4
0: notOK
1: OK | scalar | Enumeration | .1.3.6.1.4.1.5597.80.1.14 |
| mbgMDUTemp MDU temperature | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.80.1.15 |
| mbgMDUSlot1 IO Module | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.80.1.16 |
| mbgMDUSlot2 IO Module | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.80.1.17 |
| mbgMDUSlot3 IO Module | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.80.1.18 |
| mbgMDUSlot4 IO Module | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.80.1.19 |
| mbgMDUSerialNo MDU serial number | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.80.1.2 |
| mbgMDUSlot5 IO Module | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.80.1.20 |
| mbgMDUSlot6 IO Module | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.80.1.21 |
| mbgMDUSlot7 IO Module | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.80.1.22 |
| mbgMDUSlot8 IO Module | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.80.1.23 |
| mbgMDUSlot9 IO Module | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.80.1.24 |
| mbgMDUSlot10 IO Module | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.80.1.25 |
| mbgMDUSlot11 IO Module | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.80.1.26 |
| mbgMDUSlot12 IO Module | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.80.1.27 |
| mbgMDUSlot13 IO Module | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.80.1.28 |
| mbgMDUSlot14 IO Module | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.80.1.29 |
| mbgMDUFirmwareRev MDU firmware version | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.80.1.3 |
| mbgMDUClk1 Clk Module | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.80.1.30 |
| mbgMDUClk2 Clk Module | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.80.1.31 |
| mbgMDUMasterVal Current selected masterclock of switchcard as value
0: no master selected (outputs disabled)
1: GPS clock 1 is master
2: GPS clock 2 is master | scalar | Enumeration | .1.3.6.1.4.1.5597.80.1.4 |
| mbgMDULocalRemote Current masterselect mode of GPS switchcard as value
0: local masterselect
1: remote masterselect | scalar | Enumeration | .1.3.6.1.4.1.5597.80.1.5 |
| mbgTrapIPAddress Trap receiver IP address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5597.80.1.6 |
| mbgMDUSyncStatusClk1 Current time sync status of clk 1
0: not synchronized
1: synchronized | scalar | Enumeration | .1.3.6.1.4.1.5597.80.1.7 |
| mbgMDUSyncStatusClk2 Current time sync status of clk 2
0: not synchronized
1: synchronized | scalar | Enumeration | .1.3.6.1.4.1.5597.80.1.8 |