mbgLtNgCfgPtpEnableDhcp
MBG-SNMP-LTNG-MIB ·
.1.3.6.1.4.1.5597.30.1.4.1.1.12
Object
column
MBG-SNMP-ROOT-MIBMeinbergSwitch
Enable DCHP for PTPv2 module
Context
- MIB
- MBG-SNMP-LTNG-MIB
- OID
.1.3.6.1.4.1.5597.30.1.4.1.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mbgLtNgCfgPtpTableEntry
- Table
- mbgLtNgCfgPtpTable
- Siblings
- 45
Syntax
MBG-SNMP-ROOT-MIBMeinbergSwitch
- Source
- MBG-SNMP-ROOT-MIBMeinbergSwitch
- Base type
Enumeration
Values & Constraints
Type Values
0 | off |
1 | on |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mbgLtNgCfgPtpIndex index for PTPv2 module | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5597.30.1.4.1.1.1 |
| mbgLtNgCfgPtpVlanId VLAN id ranges from 0-4096 | column | Unsigned32 | .1.3.6.1.4.1.5597.30.1.4.1.1.10 |
| mbgLtNgCfgPtpVlanPriority VLAN priority ranges from 0-7 | column | Unsigned32 | .1.3.6.1.4.1.5597.30.1.4.1.1.11 |
| mbgLtNgCfgPtpMode PTP mode | column | Enumeration | .1.3.6.1.4.1.5597.30.1.4.1.1.13 |
| mbgLtNgCfgPtpDelayMechanism how to calculate delay mechanism | column | Enumeration | .1.3.6.1.4.1.5597.30.1.4.1.1.14 |
| mbgLtNgCfgPtpNetworkProtocol how to calculate delay mechanism | column | Enumeration | .1.3.6.1.4.1.5597.30.1.4.1.1.15 |
| mbgLtNgCfgPtpDomainNumber ptp domain membership | column | Unsigned32 | .1.3.6.1.4.1.5597.30.1.4.1.1.16 |
| mbgLtNgCfgPtpPriority1 ptp user defined major priority | column | Unsigned32 | .1.3.6.1.4.1.5597.30.1.4.1.1.17 |
| mbgLtNgCfgPtpPriority2 ptp user defined minor priority | column | Unsigned32 | .1.3.6.1.4.1.5597.30.1.4.1.1.18 |
| mbgLtNgCfgPtpSyncInterval value is defined as power of 2;
for example:
2 = one message every 4 seconds,
-2 = 4 messages every second | column | Integer32 | .1.3.6.1.4.1.5597.30.1.4.1.1.19 |
| mbgLtNgCfgPtpHostname network hostname | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.30.1.4.1.1.2 |
| mbgLtNgCfgPtpAnnounceInterval see 'mbgLtNgCfPtpSyncInterval' for explanation | column | Integer32 | .1.3.6.1.4.1.5597.30.1.4.1.1.20 |
| mbgLtNgCfgPtpDelayReqInterval see 'mbgLtNgCfPtpSyncInterval' for explanation | column | Integer32 | .1.3.6.1.4.1.5597.30.1.4.1.1.21 |
| mbgLtNgCfgPtpTimescale see 'mbgLtNgCfPtpSyncInterval' for explanation | column | Enumeration | .1.3.6.1.4.1.5597.30.1.4.1.1.22 |
| mbgLtNgCfgPtpIpv6Avail Is IPv6 supported? | column | Enumeration | .1.3.6.1.4.1.5597.30.1.4.1.1.23 |
| mbgLtNgCfgPtpIpv6Mode IPv6 addressing mode | column | Enumeration | .1.3.6.1.4.1.5597.30.1.4.1.1.24 |
| mbgLtNgCfgPtpIpv6Address IPv6 address if supported, else n/a | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.30.1.4.1.1.25 |
| mbgLtNgCfgPtpIpv6McastScope Multicast scope. See RFC 7346 and RFC 4291 | column | Enumeration | .1.3.6.1.4.1.5597.30.1.4.1.1.26 |
| mbgLtNgCfgPtpDisableSsh Disable SSH for PTP port | column | MBG-SNMP-ROOT-MIBMeinbergSwitch | .1.3.6.1.4.1.5597.30.1.4.1.1.27 |
| mbgLtNgCfgPtpDscpClass DSCP classification value ranges from 0-64 | column | Unsigned32 | .1.3.6.1.4.1.5597.30.1.4.1.1.28 |
| mbgLtNgCfgPtpMcastTtl Multicast TTL value ranges from 0-255 | column | Unsigned32 | .1.3.6.1.4.1.5597.30.1.4.1.1.29 |
| mbgLtNgCfgPtpDomainname network domain | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.30.1.4.1.1.3 |
| mbgLtNgCfgPtpOpMode General PTP operation mode | column | Enumeration | .1.3.6.1.4.1.5597.30.1.4.1.1.30 |
| mbgLtNgCfgPtpProfile PTP profile | column | Enumeration | .1.3.6.1.4.1.5597.30.1.4.1.1.31 |
| mbgLtNgCfgPtpHybridMode Run card in hybrid mode | column | MBG-SNMP-ROOT-MIBMeinbergSwitch | .1.3.6.1.4.1.5597.30.1.4.1.1.32 |
| mbgLtNgCfgPtpUcastMstAddr IP address of unicast master
when in slave mode. Only 1!!!
is shown and can be set. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.30.1.4.1.1.33 |
| mbgLtNgCfgPtpAnnRcptTmout Timeout for announce messages | column | Unsigned32 | .1.3.6.1.4.1.5597.30.1.4.1.1.34 |
| mbgLtNgCfgPtpMessageDuration Time period until master stops
sending messages [s] | column | Unsigned32 | .1.3.6.1.4.1.5597.30.1.4.1.1.35 |
| mbgLtNgCfgPtpSyncEAvail Is SyncE supported? | column | MBG-SNMP-ROOT-MIBMeinbergSwitch | .1.3.6.1.4.1.5597.30.1.4.1.1.36 |
| mbgLtNgCfgPtpSyncEEnabled Is Sync-E enabled if supported? | column | MBG-SNMP-ROOT-MIBMeinbergSwitch | .1.3.6.1.4.1.5597.30.1.4.1.1.37 |
| mbgLtNgCfgPtpSyncEQltLvlSelEnable Enable quality selection? | column | MBG-SNMP-ROOT-MIBMeinbergSwitch | .1.3.6.1.4.1.5597.30.1.4.1.1.38 |
| mbgLtNgCfgPtpSyncESdhNwOption Sdh network option | column | Enumeration | .1.3.6.1.4.1.5597.30.1.4.1.1.39 |
| mbgLtNgCfgPtpNameserver1 ethernet nameserver for hostname resolving | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.30.1.4.1.1.4 |
| mbgLtNgCfgPtpSyncEInputSsm Input SSMs combied for both options.
You should be aware of using which code when. | column | Enumeration | .1.3.6.1.4.1.5597.30.1.4.1.1.40 |
| mbgLtNgCfgPtpSyncEOutputSsm Input SSMs combined for both options.
You should be aware of using which code when. | column | Enumeration | .1.3.6.1.4.1.5597.30.1.4.1.1.41 |
| mbgLtNgCfgPtpSyncEGbitCopperMode Gigabit copper modes | column | Enumeration | .1.3.6.1.4.1.5597.30.1.4.1.1.42 |
| mbgLtNgCfgPtpMiscEnable1Step Enable PTP 1 step if supported | column | MBG-SNMP-ROOT-MIBMeinbergSwitch | .1.3.6.1.4.1.5597.30.1.4.1.1.43 |
| mbgLtNgCfgPtpDisableMgmtMsgs Disable management messages if suppported | column | MBG-SNMP-ROOT-MIBMeinbergSwitch | .1.3.6.1.4.1.5597.30.1.4.1.1.44 |
| mbgLtNgCfgPtpOutput1 Additional I/O output if suppported | column | Enumeration | .1.3.6.1.4.1.5597.30.1.4.1.1.45 |
| mbgLtNgCfgPtpOutput2 Additional I/O output if suppported | column | Enumeration | .1.3.6.1.4.1.5597.30.1.4.1.1.46 |
| mbgLtNgCfgPtpNameserver2 ethernet nameserver for hostname resolving | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.30.1.4.1.1.5 |
| mbgLtNgCfgPtpIpv4 ip address | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.30.1.4.1.1.6 |
| mbgLtNgCfgPtpNetmask netmask | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.30.1.4.1.1.7 |
| mbgLtNgCfgPtpGateway default gateway | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5597.30.1.4.1.1.8 |
| mbgLtNgCfgPtpEnableVlan Enable VLAN if it is supported | column | MBG-SNMP-ROOT-MIBMeinbergSwitch | .1.3.6.1.4.1.5597.30.1.4.1.1.9 |