lntPortAutoPartFlt
Lannet-Trapsv2-MIB ·
.1.3.6.1.4.1.81.38.12.0.3023
Object
notification
The port on the module reports the activation of the auto partition mechanism. This event means that an excessive number of errors occurred on the port, and the port is disconnected from the repeater or switch unit. The network administrator should check the segment and/or end stations connected to the port for hardware or misconfiguration problems. (Bit 1 in the genPortFaultMask set to on, genPortFunctionalStatus = partition(8))
Context
- MIB
- Lannet-Trapsv2-MIB
- OID
.1.3.6.1.4.1.81.38.12.0.3023- Type
- notification
- Status
- current
- Parent
- lntEthPortFaultPrefix
- Siblings
- 13
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lntEthPortAutoNegotiationFlt The port recovered from a previously reported
connectivity problem. (Bit 4 in the genPortFaultMask set to off,
scEthPortAutoNegotiationStatus = ok) | notification | - | .1.3.6.1.4.1.81.38.12.0.3001 |
| lntEthPortAutoNegotiationOK The port recovered from a previously reported
connectivity problem. (Bit 4 in the genPortFaultMask set to off,
scEthPortAutoNegotiationStatus = ok) | notification | - | .1.3.6.1.4.1.81.38.12.0.3002 |
| lntPortFEFlt The port hardware detects a loss of connectivity
reported by the remote extremity of the link connected to
the port. This indication shows that though the cabling is
at least part… | notification | - | .1.3.6.1.4.1.81.38.12.0.3005 |
| lntPortFEOk A previously detected problem in the integrity of the link,
reported by the remote link circuitry was solved.
(Bit 10 in the genPortFaultMask set to off,
scEthPortFunctionalStatu… | notification | - | .1.3.6.1.4.1.81.38.12.0.3006 |
| lntVPortFEFlt The valuable port hardware detects a loss of connectivity
reported by the remote extremity of the link connected to
the port. This indication shows that though the cabling is
at l… | notification | - | .1.3.6.1.4.1.81.38.12.0.3015 |
| lntVPortFEOk A previously detected problem in the integrity of the link
to a valuable port, reported by the remote
link circuitry was solved.
(Bit 10 in the genPortFaultMask set to off,
scE… | notification | - | .1.3.6.1.4.1.81.38.12.0.3016 |
| lntPortAutoPartOk The port recovered from a previously reported auto
partition fault.
(Bit 1 in the genPortFaultMask set to off,
genPortFunctionalStatus = ok) | notification | - | .1.3.6.1.4.1.81.38.12.0.3024 |
| lntVPortAutoPartFlt The valuable port on the module reports the activation of the
autopartition mechanism. This event means that an
excessive number of errors occurred on the port, and the
port is di… | notification | - | .1.3.6.1.4.1.81.38.12.0.3025 |
| lntVPortAutoPartOK The valuable port recovered from a previously
reported auto partition fault.
(Bit 1 in the genPortFaultMask set to off,
genPortFunctionalStatus = ok) | notification | - | .1.3.6.1.4.1.81.38.12.0.3026 |
| lntEthVPortAutoNegotiationFlt The valuable port hardware detects the lack of a connection
to an end station or to another hub or switch. While this
is may not be necessarily a fault condition, the network
admi… | notification | - | .1.3.6.1.4.1.81.38.12.0.3031 |
| lntEthVPortAutoNegotiationOK The port hardware detects the lack of a connection
to an end station or to another hub or switch. While this
is may not be necessarily a fault condition, the network
administrator… | notification | - | .1.3.6.1.4.1.81.38.12.0.3032 |
| lntPortInlinePowerFlt The Inline Power (Power-over-Ethernet) port hardware reports that the PD (Powered device)
connected to that port is not receiving Inline Power due to a fault condition.
(Bit 37 in… | notification | - | .1.3.6.1.4.1.81.38.12.0.3933 |
| lntPortInlinePowerOK The Inline Power (Power-over-Ethernet) port hardware reports that the PD (Powered device)
connected to that port is not in a fault condition. It may or not be delievering Inline P… | notification | - | .1.3.6.1.4.1.81.38.12.0.3934 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| CONFIG-MIBgenPortFaultMask mandatory Each bit of this item describes the situation of the port
regarding specific fault. For example:
bit 1: on indicates 'port autopartition fault'
bit4 : on indicates 'Ethernet port … | column | OctetString | .1.3.6.1.4.1.81.9.1.1.14 |
| CONFIG-MIBgenPortGroupId mandatory Index which identifies the group inside the chassis for which this
entry contains information. Equals the number of the slot by which
the group containing the port is accessed. Th… | column | Integer32 | .1.3.6.1.4.1.81.9.1.1.1 |
| CONFIG-MIBgenPortId mandatory Index which identifies the port inside the group for which this
entry contains information. It generally corresponds with the number
by which the port is identified and is marked … | column | Integer32 | .1.3.6.1.4.1.81.9.1.1.2 |