lntPolicyAccessControlViolationFlt

Lannet-Trapsv2-MIB · .1.3.6.1.4.1.81.38.11.0.64
MIB view Table view

Object

notification 
This trap reports to the Management station on IP  PolicyAccess Control violation. 
The trap includes in its varbind information about the slot where the event occurred,
The id of the rule that was violated in the current rules table,
and the quintuplet that identifies the faulty packet.
A management application would display this trap and the relevant information in a log entry.
This trap will not be sent at intervals smaller than one minute for identical information in the 
varbinds list variables

Context

MIB
Lannet-Trapsv2-MIB
OID
.1.3.6.1.4.1.81.38.11.0.64
Type
notification
Status
current
Parent
lntPolicyPrefix
Siblings
2

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
lntPolicyChangeEvent
The trap reports a change in the active list specific for a policy-enabled box or module
notification-.1.3.6.1.4.1.81.38.11.0.60
lntPolicyAccessControlListLvlRuleTrap
This trap reports to the Management station when a list-level Policy rule (e.g., ipPolicyListIpOptionOperation) specifies an operation that includes a 'notify' action. The trap in…
notification-.1.3.6.1.4.1.81.38.11.0.62
Notification Objects
ObjectTypeSyntaxOID
POLICY-MIBipPolicyAccessControlViolationEntID
The EntID-id (AKA module-id / box number) for which the trap was vsent
columnInteger32.1.3.6.1.4.1.81.36.7.1.1
POLICY-MIBipPolicyAccessControlViolationSrcAddr
The IP address of the source station in the packet
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.81.36.7.1.2
POLICY-MIBipPolicyAccessControlViolationDstAddr
The IP address of the destination station in the packet
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.81.36.7.1.3
POLICY-MIBipPolicyAccessControlViolationProtocol
The IP protocol in the packet. Use 256 to specify IP (i.e. don't care)
columnInteger32.1.3.6.1.4.1.81.36.7.1.4
POLICY-MIBipPolicyAccessControlViolationL4SrcPort
The source port of the packet. This fields is applicable only when ipPolicyAccessControlViolationProtocol is TCP(6) or UDP(17). In all other cases its values is not used.
columnInteger32.1.3.6.1.4.1.81.36.7.1.5
POLICY-MIBipPolicyAccessControlViolationL4DstPort
The destination port of the packet. This fields is applicable only when ipPolicyAccessControlViolationProtocol is TCP(6) or UDP(17). In all other cases its values is not used.
columnInteger32.1.3.6.1.4.1.81.36.7.1.6
POLICY-MIBipPolicyAccessControlViolationEstablished
This field indicates the value of the established bit in the TCP header of the packet. This fields is applicable only when \ ipPolicyAccessControlViolationProtocol is TCP(6) or UD…
columnEnumeration.1.3.6.1.4.1.81.36.7.1.7
POLICY-MIBipPolicyRuleID
Number of rule within its list. Each list may contain many rule. Lists work in a First Match manner. A rule with a lower ID would be preferred over a rule with a higher ID.
columnInteger32.1.3.6.1.4.1.81.36.2.1.3
POLICY-MIBipPolicyRuleListID
The ID of the list this rule is part of. Derived from list range. See ipPolicyListID MIB.
columnInteger32.1.3.6.1.4.1.81.36.2.1.2
POLICY-MIBipPolicyAccessControlViolationIfIndex
The interface on which the violation occured.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.81.36.7.1.9
POLICY-MIBipPolicyAccessControlViolationSubCtxt
The sub-context on which this violation occured.
columnEnumeration.1.3.6.1.4.1.81.36.7.1.10
POLICY-MIBipPolicyAccessControlViolationTime
The value of sysUpTime at the time the violation was recorded
columnRFC1155-SMITimeTicks.1.3.6.1.4.1.81.36.7.1.11
POLICY-MIBipPolicyRuleDescription
IP rule description field. Allowing the user to specify the description for each rule. In Crypto list a rule equals a tunnel and therefore the description is of the tunnel. There …
columnOctetString.1.3.6.1.4.1.81.36.2.1.33