lt2sLineLaserBias
Lambdatrail2s-MIB ·
.1.3.6.1.4.1.35616.5.3.1.1.16
Object
column
0.001 Amp Integer32
The line SFP laser bias of the port. If the line SFP is not plugged in, the object should contain the value of -1.
Context
- MIB
- Lambdatrail2s-MIB
- OID
.1.3.6.1.4.1.35616.5.3.1.1.16- Type
- column
- Access
- readonly
- Status
- current
- Units
- 0.001 Amp
- Parent
- lt2sPortEntry
- Table
- lt2sPortTable
- Siblings
- 32
Syntax
0.001 Amp Integer32
Values & Constraints
Object Constraints
range: -1-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lt2sPortId A unique value for each port. | column | Integer32 | .1.3.6.1.4.1.35616.5.3.1.1.1 |
| lt2sLineApsd The automatic power shut down state of the line port. | column | Enumeration | .1.3.6.1.4.1.35616.5.3.1.1.10 |
| lt2sLineType The line SFP type of the port. | column | OctetString | .1.3.6.1.4.1.35616.5.3.1.1.11 |
| lt2sLineWavelength The line SFP wavelength of the port. If the line SFP is not
plugged in, the object should contain the value of 'NA'. | column | OctetString | .1.3.6.1.4.1.35616.5.3.1.1.12 |
| lt2sLineTxPower The line SFP transmit power of the port. If the line SFP
is not plugged in, the object should contain the value of -1. | column | 0.001 dBm Integer32 | .1.3.6.1.4.1.35616.5.3.1.1.13 |
| lt2sLineRxPower The line SFP receive power of the port. If the line SFP
is not plugged in, the object should contain the value of -1. | column | 0.001 dBm Integer32 | .1.3.6.1.4.1.35616.5.3.1.1.14 |
| lt2sLineLaserTemp The line SFP laser temperature of the port. If the line SFP
is not plugged in, the object should contain the value of -1. | column | degrees Centigrade Integer32 | .1.3.6.1.4.1.35616.5.3.1.1.15 |
| lt2sLineTxLow The line SFP laser TX low threshold of the port. | column | dBm Integer32 | .1.3.6.1.4.1.35616.5.3.1.1.17 |
| lt2sLineTxHigh The line SFP laser TX high threshold of the port. | column | dBm Integer32 | .1.3.6.1.4.1.35616.5.3.1.1.18 |
| lt2sLineRxLow The line SFP laser RX low threshold of the port. | column | dBm Integer32 | .1.3.6.1.4.1.35616.5.3.1.1.19 |
| lt2sPortEnable The status of the port. | column | Enumeration | .1.3.6.1.4.1.35616.5.3.1.1.2 |
| lt2sLineRxHigh The line SFP laser RX high threshold of the port. | column | dBm Integer32 | .1.3.6.1.4.1.35616.5.3.1.1.20 |
| lt2sClientPlugged The client SFP plugged state of the port. | column | Enumeration | .1.3.6.1.4.1.35616.5.3.1.1.21 |
| lt2sClientLink The client SFP link state of the port. | column | Enumeration | .1.3.6.1.4.1.35616.5.3.1.1.22 |
| lt2sClientApsd The automatic power shut down state of the client port. | column | Enumeration | .1.3.6.1.4.1.35616.5.3.1.1.23 |
| lt2sClientType The client SFP type of the port. | column | OctetString | .1.3.6.1.4.1.35616.5.3.1.1.24 |
| lt2sClientWavelength The client SFP wavelength of the port. If the client SFP
is not plugged in, the object should contain the value of 'NA'. | column | OctetString | .1.3.6.1.4.1.35616.5.3.1.1.25 |
| lt2sClientTxPower The client SFP transmit power of the port. If the client SFP
is not plugged in, the object should contain the value of -1. | column | 0.001 dBm Integer32 | .1.3.6.1.4.1.35616.5.3.1.1.26 |
| lt2sClientRxPower The client SFP receive power of the port. If the client SFP
is not plugged in, the object should contain the value of -1. | column | 0.001 dBm Integer32 | .1.3.6.1.4.1.35616.5.3.1.1.27 |
| lt2sClientLaserTemp The client SFP laser temperature of the port. If the client SFP
is not plugged in, the object should contain the value of -1. | column | degrees Centigrade Integer32 | .1.3.6.1.4.1.35616.5.3.1.1.28 |
| lt2sClientLaserBias The client SFP laser bias of the port. If the client SFP
is not plugged in, the object should contain the value of -1. | column | 0.001 Amp Integer32 | .1.3.6.1.4.1.35616.5.3.1.1.29 |
| lt2sPortApsd The automatic power shut down configuration of the port. | column | Enumeration | .1.3.6.1.4.1.35616.5.3.1.1.3 |
| lt2sClientTxLow The client SFP laser TX low threshold of the port. | column | dBm Integer32 | .1.3.6.1.4.1.35616.5.3.1.1.30 |
| lt2sClientTxHigh The client SFP laser TX high threshold of the port. | column | dBm Integer32 | .1.3.6.1.4.1.35616.5.3.1.1.31 |
| lt2sClientRxLow The client SFP laser RX low threshold of the port. | column | dBm Integer32 | .1.3.6.1.4.1.35616.5.3.1.1.32 |
| lt2sClientRxHigh The client SFP laser RX high threshold of the port. | column | dBm Integer32 | .1.3.6.1.4.1.35616.5.3.1.1.33 |
| lt2sPortSpeed The speed mode of the port. | column | Enumeration | .1.3.6.1.4.1.35616.5.3.1.1.4 |
| lt2sPortReset Reset the port. | column | Enumeration | .1.3.6.1.4.1.35616.5.3.1.1.5 |
| lt2sPortLoop Set Loop on chosen port. | column | Enumeration | .1.3.6.1.4.1.35616.5.3.1.1.6 |
| lt2sPortName The name of the port. | column | OctetString | .1.3.6.1.4.1.35616.5.3.1.1.7 |
| lt2sLinePlugged The line SFP plugged state of the port. | column | Enumeration | .1.3.6.1.4.1.35616.5.3.1.1.8 |
| lt2sLineLink The line SFP link state of the port. | column | Enumeration | .1.3.6.1.4.1.35616.5.3.1.1.9 |