upsmMarginForSwitch
LUXN-MIB ·
.1.3.6.1.4.1.4253.1.17.6.1.16
Object
column
mandatory
r/w
Integer32
The UPSM switching threshold for protection switch to occur. The limit is from -32 to -6. Switching threshold must be 1 dBm or more less than the minimum switch power.
Syntax
Integer32
Values & Constraints
Object Constraints
range: -32--6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| upsmCardLocation mandatory Location of the UPSM card. Valid values are: Local in
the same chassis. | column | CardLocation | .1.3.6.1.4.1.4253.1.17.6.1.1 |
| upsmFWName mandatory UPSM's Firmware Name. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.17.6.1.10 |
| upsmFWVersionID mandatory The current version string of the UPSM FW code. | column | VersionString | .1.3.6.1.4.1.4253.1.17.6.1.11 |
| upsmFWDate mandatory Date and Time of latest Firmware of the UPSM card. | column | DateAndTime | .1.3.6.1.4.1.4253.1.17.6.1.12 |
| upsmSetState mandatory Instruct the upsm to do a warmboot. A get on this will
always return an other. | column | RebootType | .1.3.6.1.4.1.4253.1.17.6.1.13 |
| upsmRxInsertionLoss mandatory Insertion loss for Rx Path. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.17.6.1.14 |
| upsmTxInsertionLoss mandatory Insertion loss for Tx Path. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.17.6.1.15 |
| upsmMinProtPowerForSwitch mandatory The minimum protection link power to allow protection switch
to function. The limit is from -30 to -5. This value should
be 1 dBm or more greater than the switch margin. | column | Integer32 | .1.3.6.1.4.1.4253.1.17.6.1.17 |
| upsmDebounce mandatory The number of times to measure low power condition
before performing protection switch. | column | Integer32 | .1.3.6.1.4.1.4253.1.17.6.1.18 |
| upsmBlackOutTime mandatory The time after protection switch before allowing
another protection switch. | column | Integer32 | .1.3.6.1.4.1.4253.1.17.6.1.19 |
| upsmCardShelf mandatory The shelf the card is in. Valid values are: 1 to 2. | column | Integer32 | .1.3.6.1.4.1.4253.1.17.6.1.2 |
| upsmSwitch mandatory The Link switch control. switchToLinkA or
switchToLinkB option would disable auto switch
functionality. Auto switch functionality can
be turned on by setting to enableAutoSwitch
o… | column | Enumeration | .1.3.6.1.4.1.4253.1.17.6.1.20 |
| upsmLinkAPathID mandatory Upsm LinkA Path ID name that this card is associated with.
Set input equal NULL will remove the card off the path
and also remove the path if there is no card left
associate w… | column | PathIdName | .1.3.6.1.4.1.4253.1.17.6.1.21 |
| upsmLinkBPathID mandatory Upsm LinkB Path ID name that this card is associated with.
Set input equal NULL will remove the card off the path
and also remove the path if there is no card left
associate w… | column | PathIdName | .1.3.6.1.4.1.4253.1.17.6.1.22 |
| upsmAdminState mandatory Administrative control over that upsm card. Default value is enable.
When disabled, no alarms/events gets
generated. | column | Enumeration | .1.3.6.1.4.1.4253.1.17.6.1.23 |
| upsmCleiNum mandatory CLEI number of the upsm Card. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.17.6.1.24 |
| upsmSwitchState mandatory The switching state. Switching state may be
either auto or forced. The auto state means
automatic switching is enabled. Forced state
means swithcing is disabled and has been f… | column | Enumeration | .1.3.6.1.4.1.4253.1.17.6.1.25 |
| upsmNumPorts mandatory Total port numbers on each UPSM card. | column | Integer32 | .1.3.6.1.4.1.4253.1.17.6.1.26 |
| upsmCardSlot mandatory The slot within the shelf the module is in. The range
of valid values range from 1 through 17 depending on
the chassis type and the shelf the module is in.
To delete this card, s… | column | Integer32 | .1.3.6.1.4.1.4253.1.17.6.1.3 |
| upsmModelNum mandatory UPSM's model number. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.17.6.1.4 |
| upsmOpticsMfgDate mandatory Date and Time of manufacturing of the optics
on the UPSM card. | column | DateAndTime | .1.3.6.1.4.1.4253.1.17.6.1.5 |
| upsmSerialNum mandatory Serial # of the UPSM card. | column | SerialString | .1.3.6.1.4.1.4253.1.17.6.1.6 |
| upsmModelType mandatory Model type of the UPSM. | column | CardType | .1.3.6.1.4.1.4253.1.17.6.1.7 |
| upsmHWName mandatory Manufacturing Hardware name of the UPSM Card. | column | CardName | .1.3.6.1.4.1.4253.1.17.6.1.8 |
| upsmCardName mandatory User configurable card name. | column | CardName | .1.3.6.1.4.1.4253.1.17.6.1.9 |