sysAlarmSerial
LUXN-MIB ·
.1.3.6.1.4.1.4253.1.21.5
Object
scalar
mandatory
r/w
Enumeration
Enables or disables the flow of TL1 alarms to the serial port.
Context
- MIB
- LUXN-MIB
- OID
.1.3.6.1.4.1.4253.1.21.5- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- systemConfig
- Siblings
- 23
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sysAddCard mandatory Add card operation given type, shelf, slot, and
optionally sub card type. The format is (type,shelf,
slot[,optional]). If the fourth optional
parameter is present, for OCMITU/OC… | scalar | OctetString | .1.3.6.1.4.1.4253.1.21.1 |
| sysSwitchAll mandatory Switch all CC cards that have backup. | scalar | Enumeration | .1.3.6.1.4.1.4253.1.21.10 |
| sysAlarmMinor mandatory Turns on or off all external minor
audible and visual alarms. | scalar | Enumeration | .1.3.6.1.4.1.4253.1.21.11 |
| sysDelCfgDb mandatory Action to delete configuration database. MPM would reboot
after the database is deleted. A get on it will return other | scalar | Enumeration | .1.3.6.1.4.1.4253.1.21.12 |
| sysImnAddRoute mandatory Add route operation. It takes destination IP address,
IP mask and the route metric.
The format is (destination IP, IP mask, routeMetric).
A get on this will return … | scalar | OctetString | .1.3.6.1.4.1.4253.1.21.13 |
| sysImnDeleteRoute mandatory Delete route operation. It takes destination IP address
and IP mask.
The format is (destination IP, IP mask=).
A get on this will return 0.0.0.0,0.0.0.0 | scalar | OctetString | .1.3.6.1.4.1.4253.1.21.14 |
| sysExtAlarmInputTable mandatory This table represents the input information for each
external alarm indicator | table | - | .1.3.6.1.4.1.4253.1.21.17 |
| sysAudioAlarm mandatory Mode for audio alarm.
Default is off. For non-carrier-class chassis, it is na | scalar | Enumeration | .1.3.6.1.4.1.4253.1.21.18 |
| sysAudioAlarmSeverity mandatory Controls for audio alarm. When the control is set to
minor, it will go off for all minor and up
alarms. Default is major. For non-carrier-class chassis,
it is na. These control on… | scalar | Enumeration | .1.3.6.1.4.1.4253.1.21.19 |
| sysAlarmCtrl mandatory The Master Control for Alarms. Will enable or disable
all external and visual alarms of the system. The
default state is enable. | scalar | Enumeration | .1.3.6.1.4.1.4253.1.21.2 |
| sysRdbcopy mandatory Forces a database copy to the standby MPM. Reading this
element will always return 'other'. This element can
only be set to 'copydb'. If the standby MPM is present
then a databa… | scalar | Enumeration | .1.3.6.1.4.1.4253.1.21.20 |
| sysRdbcopyStatus mandatory Displays the percentage done for forced database copies.
No value is returned if a forced database copy is not
in progress. | scalar | Integer32 | .1.3.6.1.4.1.4253.1.21.21 |
| sysSDMRequestsQueued mandatory Displays the number of requests in the SDM queue. | scalar | Integer32 | .1.3.6.1.4.1.4253.1.21.22 |
| sysModuleupdateJobsWaiting mandatory Displays the number of module updates jobs from the
current request that must wait until one or more of
the jobs progressing completes. This element will
only be returned if one … | scalar | Integer32 | .1.3.6.1.4.1.4253.1.21.23 |
| sysModuleupdateJobsTable mandatory This table defines the module update jobs in progress.
Table entries will only be reutrned if one for more
module update jobs are in progress. | table | - | .1.3.6.1.4.1.4253.1.21.24 |
| sysSNMPKeepaliveEnable mandatory Enable or disable SNMP keep alive functionality. | scalar | Enumeration | .1.3.6.1.4.1.4253.1.21.25 |
| sysSNMPKeepaliveInterval mandatory Set the SNMP keep alive interval in minutes. | scalar | Integer32 | .1.3.6.1.4.1.4253.1.21.26 |
| sysAlarmCritical mandatory Turns on or off all external critical audible
and visual alarms. | scalar | Enumeration | .1.3.6.1.4.1.4253.1.21.3 |
| sysAlarmMajor mandatory Turns on or off all external major and minor
audible and visual alarms. | scalar | Enumeration | .1.3.6.1.4.1.4253.1.21.4 |
| sysAlarmAutoCutoff mandatory Enables or disables the AutoCutoff feature
for dry-contact alarm closures | scalar | Enumeration | .1.3.6.1.4.1.4253.1.21.6 |
| sysAddRoute mandatory Add route operation given local shelf, local slot, destination
IP address and route Type. The format is (shelf, slot,
route Type, destination IP).
Different types of route type… | scalar | OctetString | .1.3.6.1.4.1.4253.1.21.7 |
| sysDeleteRoute mandatory Delete route operation given local shelf, local slot & destination
IP address . The format is (shelf, slot,
destination IP).
For example, to delete a route to a Lu… | scalar | OctetString | .1.3.6.1.4.1.4253.1.21.8 |
| sysSwitchByPathId mandatory Initiate UPSR switching by Path ID. | scalar | PathIdName | .1.3.6.1.4.1.4253.1.21.9 |