osamPerfErrFreeSecs
LUXN-MIB ·
.1.3.6.1.4.1.4253.2.1.15.3.1.8
Object
The number of seconds in the most current 15 minutes interval that this module has not experienced any alarms.
Context
- MIB
- LUXN-MIB
- OID
.1.3.6.1.4.1.4253.2.1.15.3.1.8- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- osamPerfEntry
- Table
- osamPerfTable
- Siblings
- 29
Syntax
RFC1155-SMICounter
- Source
- RFC1155-SMICounter
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| osamPerfLocation mandatory Location of the module. | column | CardLocation | .1.3.6.1.4.1.4253.2.1.15.3.1.1 |
| osamPerfInputPower mandatory The power at the input in dBm.
Not applicable to OSAM-HP/LP
module | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.2.1.15.3.1.10 |
| osamPerfBFDPower mandatory The back facet diode reading in the pump laser;
related to the power output of the pump laser.
This values isn't calibrated and doesn't have a
unit. Not applicable to OSAM-HP/LP m… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.2.1.15.3.1.11 |
| osamPerfOutputPower mandatory The power at the output port in dBm. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.2.1.15.3.1.12 |
| osamPerfAPRDetector1Power mandatory The automatic power reduction detector 1 reading
in dBm. Two readings are provided for redundancy
purposes. Not applicable to OSAM-HP/LP module | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.2.1.15.3.1.13 |
| osamPerfAPRDetector2Power mandatory The automatic power reduction detector 2 reading
in dBm. Two readings are provided for redundancy
purposes. Not applicable to OSAM-HP/LP module | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.2.1.15.3.1.14 |
| osamPerfLaserTemperature mandatory The pump laser temperature in degree Celsius.
Not applicable to OSAM-HP/LP module | column | Integer32 | .1.3.6.1.4.1.4253.2.1.15.3.1.15 |
| osamPerfTecCurrent mandatory The Thermo-Electric Cooler current in mA.
Not applicable to OSAM-HP/LP module | column | Integer32 | .1.3.6.1.4.1.4253.2.1.15.3.1.16 |
| osamPerfBiasCurrent mandatory The measured pump laser bias current in mA.
Not applicable to OSAM-HP/LP module | column | Integer32 | .1.3.6.1.4.1.4253.2.1.15.3.1.17 |
| osamPerfAmplifierGain mandatory The measured overall amplifier gain in dB. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.2.1.15.3.1.18 |
| osamPerfPCBTemperature mandatory The temperature of the printed circuit board in
degree Celsius. | column | Integer32 | .1.3.6.1.4.1.4253.2.1.15.3.1.19 |
| osamPerfShelf mandatory The shelf number in which the module is plugged in. | column | CardShelf | .1.3.6.1.4.1.4253.2.1.15.3.1.2 |
| osam2PerfPump1BFDPower mandatory The back facet diode reading in pump 1 laser;
related to the power output of the pump laser.
Unit to represent the value is DAC (Digital to
Analog converter) | column | Integer32 | .1.3.6.1.4.1.4253.2.1.15.3.1.20 |
| osam2PerfPump2BFDPower mandatory The back facet diode reading in pump 2 laser;
related to the power output of the pump laser.
Unit to represent the value is DAC (Digital to
Analog converter).
Applicable only for … | column | Integer32 | .1.3.6.1.4.1.4253.2.1.15.3.1.21 |
| osam2PerfPump1IBias mandatory Indicates the bias current of Pump 1 in mA.
The range of values of bias current range from 40 mA -
barely turning on, to MaxIbias - maximum operating current
recommended by the… | column | Integer32 | .1.3.6.1.4.1.4253.2.1.15.3.1.22 |
| osam2PerfPump2IBias mandatory Indicates the bias current of Pump 2 in mA.
The range of values of bias current range from 40 mA -
barely turning on, to MaxIbias - maximum operating current
recommended by the… | column | Integer32 | .1.3.6.1.4.1.4253.2.1.15.3.1.23 |
| osam2PerfPump1ITEC mandatory Indicates the current level in mA of Thermal Electric Cooler (TEC)
used for cooling laser pump 1. | column | Integer32 | .1.3.6.1.4.1.4253.2.1.15.3.1.24 |
| osam2PerfPump2ITEC mandatory Indicates the current level in mA of Thermal Electric Cooler (TEC)
used for cooling laser pump 2.
Applicable only for OSAM-HP | column | Integer32 | .1.3.6.1.4.1.4253.2.1.15.3.1.25 |
| osam2PerfPump1Temp mandatory Laser pump (#1) temperature in degree celcius | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.2.1.15.3.1.26 |
| osam2PerfPump2Temp mandatory Laser pump (#2) temperature in degree celcius
Applicable only for OSAM-HP module | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.2.1.15.3.1.27 |
| osam2PerfGBInputPower mandatory Gain block input power in dBm. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.2.1.15.3.1.28 |
| osam2PerfGBOutputPower mandatory Gain block output power in dBm with attenuation
set to zero. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.2.1.15.3.1.29 |
| osamPerfSlot mandatory The slot number in which the module is plugged in. | column | Integer32 | .1.3.6.1.4.1.4253.2.1.15.3.1.3 |
| osam2PerfAttenuation mandatory Indicates optical attenuation in dB imposed by
variable optical attenuator(VOA) | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.2.1.15.3.1.30 |
| osamPerfState mandatory The current state of the module. | column | CardState | .1.3.6.1.4.1.4253.2.1.15.3.1.4 |
| osamPerfStatus mandatory The current alarm status of the channel. | column | CardStatus | .1.3.6.1.4.1.4253.2.1.15.3.1.5 |
| osamPerfLastBootTime mandatory The date and time of the last boot for this module. | column | DateAndTime | .1.3.6.1.4.1.4253.2.1.15.3.1.6 |
| osamPerfAvailTime mandatory The number of seconds in the most current 15 minutes
interval that this module has been up and running. | column | RFC1155-SMICounter | .1.3.6.1.4.1.4253.2.1.15.3.1.7 |
| osamPerfAprStatus mandatory The status of the automatic power reduction mode.
Not applicable to OSAM-HP/LP module | column | FlagType | .1.3.6.1.4.1.4253.2.1.15.3.1.9 |