osamHWVersionID
LUXN-MIB ·
.1.3.6.1.4.1.4253.1.15.6.1.8
Object
column
mandatory
VersionString
The current hardware version string of the module.
Syntax
VersionString
- Source
- VersionString
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..12
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| osamCardLocation mandatory Location of the module. | column | CardLocation | .1.3.6.1.4.1.4253.1.15.6.1.1 |
| osamFWName mandatory Manufacturing Firmware name of the module. | column | CardName | .1.3.6.1.4.1.4253.1.15.6.1.10 |
| osamFWVersionID mandatory The current firmware version string of the module. | column | VersionString | .1.3.6.1.4.1.4253.1.15.6.1.11 |
| osamFWDate mandatory Release date for the firmware of the module. | column | DateAndTime | .1.3.6.1.4.1.4253.1.15.6.1.12 |
| osamCardName mandatory User configurable card name for the module. | column | CardName | .1.3.6.1.4.1.4253.1.15.6.1.13 |
| osamSetState mandatory Instruct the osam module to do a reset.
A get on this will always return other. | column | RebootType | .1.3.6.1.4.1.4253.1.15.6.1.14 |
| osamLaserState mandatory The operational state of the laser. | column | FlagType | .1.3.6.1.4.1.4253.1.15.6.1.15 |
| osamOperationMode mandatory Operation mode of the module. powerControlled(3) is not
supported by OSAM modules. currentControlled(1) is not
supported OSAM-HP/LP modules. | column | Enumeration | .1.3.6.1.4.1.4253.1.15.6.1.16 |
| osamLaserBiasCurrent mandatory Constant current in mA to be used by the module when
the operation mode is set to currentControlled. This
value can't be set if operation mode is set to
gainControlled.
Applica… | column | Integer32 | .1.3.6.1.4.1.4253.1.15.6.1.17 |
| osamAmplifierGain mandatory Constant gain in dB to be used by the module when the
operation mode is set to gainControlled. This value
can't be set if operation mode is set to
currentControlled.
Not applica… | column | Integer32 | .1.3.6.1.4.1.4253.1.15.6.1.18 |
| osamConfigCommit mandatory This allows the current module configuration to be
stored in permanent storage. | column | Enumeration | .1.3.6.1.4.1.4253.1.15.6.1.19 |
| osamCardShelf mandatory The shelf number in which the module is plugged in. | column | CardShelf | .1.3.6.1.4.1.4253.1.15.6.1.2 |
| osamNoiseFigure mandatory The calibrated noise figure of the gain block in dB.
Applicable only to OSAM module | column | Integer32 | .1.3.6.1.4.1.4253.1.15.6.1.20 |
| osamPathID mandatory Upsr Path ID name that this card is associated with.
Set input equal NULL will remove the card off the path
and also remove the path if there is no card left
associate with th… | column | PathIdName | .1.3.6.1.4.1.4253.1.15.6.1.21 |
| osamAdminState mandatory Administrative control over that osam card. Default value is enable.
When disabled, no alarms/events gets
generated. | column | Enumeration | .1.3.6.1.4.1.4253.1.15.6.1.22 |
| osam2NoiseFigure mandatory The calibrated noise figure of the gain block in dBm.
Applicable only to OSAM-HP/LP module | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.15.6.1.23 |
| osam2GainReq mandatory Constant gain in dB to be used by the module when the
operation mode is set to gainControlled. This value
can't be set if operation mode is set to
powerControlled. Range is 0-16… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.15.6.1.24 |
| osam2OpPowerReq mandatory Constant output power in dBm to be used by the module when the
operation mode is set to powerControlled. This value
can't be set if operation mode is set to
gainControlled. Rang… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.15.6.1.25 |
| osamCleiNum mandatory CLEI number of the osam Card. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.15.6.1.26 |
| osamNumPorts mandatory Total port numbers on each OSAM card. | column | Integer32 | .1.3.6.1.4.1.4253.1.15.6.1.27 |
| osamCardSlot mandatory The slot number in which the module is plugged in.
If a 0 is written into this mib element, the module
will be deleted from the system. | column | Integer32 | .1.3.6.1.4.1.4253.1.15.6.1.3 |
| osamModelNum mandatory Manufacturing model number of the module. | column | ModelNum | .1.3.6.1.4.1.4253.1.15.6.1.4 |
| osamSerialNum mandatory Unique serial number of the module. | column | SerialString | .1.3.6.1.4.1.4253.1.15.6.1.5 |
| osamModelType mandatory Model type of the module. | column | CardType | .1.3.6.1.4.1.4253.1.15.6.1.6 |
| osamHWName mandatory Manufacturing Hardware name of the module. | column | CardName | .1.3.6.1.4.1.4253.1.15.6.1.7 |
| osamHWDate mandatory Date of manufacturing of the electronics portion of
the module. | column | DateAndTime | .1.3.6.1.4.1.4253.1.15.6.1.9 |