oppmHighAlarmMargin
LUXN-MIB ·
.1.3.6.1.4.1.4253.1.8.6.1.17
Object
column
mandatory
Integer32
High alarm margin for input signal strength displayed in dB unit
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| oppmCardLocation mandatory Location of the OPPM card. Valid values are: Local in
the same chassis, or remote to this chassis | column | CardLocation | .1.3.6.1.4.1.4253.1.8.6.1.1 |
| oppmSetState mandatory Instruct the oppm to do a warmboot. A get on this will
always return an other. | column | RebootType | .1.3.6.1.4.1.4253.1.8.6.1.10 |
| oppmTxInsertLoss mandatory Transmit insertion loss. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.8.6.1.12 |
| oppmRxInsertLoss mandatory Receive insertion loss. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.8.6.1.13 |
| oppmUpgradeFlag mandatory The oppm card's status is upgradable or not. | column | Enumeration | .1.3.6.1.4.1.4253.1.8.6.1.14 |
| oppmSwitch mandatory instruct the OPPM to take on an
action, such as: switch to link A or link B
A get would alway return other(1). | column | Enumeration | .1.3.6.1.4.1.4253.1.8.6.1.15 |
| oppmMarginForSwitch mandatory Configurable switching margin in dB
for protection switch to occur. | column | Integer32 | .1.3.6.1.4.1.4253.1.8.6.1.16 |
| oppmConfigCommit mandatory This allows the current module configuration,
such as oppmMarginForSwitch, to be
stored in permanent storage. | column | Enumeration | .1.3.6.1.4.1.4253.1.8.6.1.18 |
| oppmHWName mandatory Display Hardware name of the OPPM Card. | column | CardName | .1.3.6.1.4.1.4253.1.8.6.1.19 |
| oppmCardShelf mandatory The shelf the card is in. Valid values are: 1 to 2 | column | CardShelf | .1.3.6.1.4.1.4253.1.8.6.1.2 |
| oppmLinkAPathID mandatory Oppmm LinkA Path ID name that this card is associated with.
Set input equal NULL will remove the card off the path
and also remove the path if there is no card left
associate … | column | PathIdName | .1.3.6.1.4.1.4253.1.8.6.1.20 |
| oppmLinkBPathID mandatory Oppm LinkB Path ID name that this card is associated with.
Set input equal NULL will remove the card off the path
and also remove the path if there is no card left
associate w… | column | PathIdName | .1.3.6.1.4.1.4253.1.8.6.1.21 |
| oppmAdminState mandatory Administrative control over that oppm card. Default value is enable.
When disabled, no alarms/events gets
generated. | column | Enumeration | .1.3.6.1.4.1.4253.1.8.6.1.22 |
| oppmCleiNum mandatory CLEI number of the oppm Card. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.8.6.1.23 |
| oppmSwitchState mandatory The switching state. Switching state may be
either auto or forced. The auto state means
automatic switching is enabled. Forced state
means swithcing is disabled and has been f… | column | Enumeration | .1.3.6.1.4.1.4253.1.8.6.1.24 |
| oppmCardSlot mandatory The slot within the shelf the module is in. The range
of valid values range from 1 through 17 depending on
the chassis type and the shelf the module is in.
To delete this card, s… | column | SlotInput | .1.3.6.1.4.1.4253.1.8.6.1.3 |
| oppmModelNum mandatory Oppm's model number. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.8.6.1.4 |
| oppmMfgDate mandatory Date and Time of manufacturing of the OPPM card | column | DateAndTime | .1.3.6.1.4.1.4253.1.8.6.1.5 |
| oppmSerialNum mandatory Serial # of the OPPM card. | column | SerialString | .1.3.6.1.4.1.4253.1.8.6.1.6 |
| oppmModelType mandatory Model type of the OPPM | column | CardType | .1.3.6.1.4.1.4253.1.8.6.1.7 |
| oppmName mandatory Display (Network) name of the OPPM Card | column | CardName | .1.3.6.1.4.1.4253.1.8.6.1.8 |
| oppmFWVersionID mandatory The current version string of the OPPM FW code | column | VersionString | .1.3.6.1.4.1.4253.1.8.6.1.9 |