ocm2SetState
LUXN-MIB ·
.1.3.6.1.4.1.4253.1.30.2.1.23
Object
column
mandatory
r/w
Enumeration
Instruct the module to do a warmboot. A get on this will always return 'other'.
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | warmboot |
3 | enableLink1Loopback |
4 | enableLink2Loopback |
5 | disableLink1loopback |
6 | disableLink2loopback |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ocm2CardLocation mandatory Location of the module. | column | CardLocation | .1.3.6.1.4.1.4253.1.30.2.1.1 |
| ocm2FwVersionID mandatory Firmware version. | column | VersionString | .1.3.6.1.4.1.4253.1.30.2.1.10 |
| ocm2FwDate mandatory Firmware release date and time. | column | DateAndTime | .1.3.6.1.4.1.4253.1.30.2.1.11 |
| ocm2ModelType mandatory Model type of the module. | column | CardType | .1.3.6.1.4.1.4253.1.30.2.1.12 |
| ocm2Name mandatory User configurable name of the module. | column | CardName | .1.3.6.1.4.1.4253.1.30.2.1.13 |
| ocm2Link1LineRate mandatory Link 1 line rate. | column | Enumeration | .1.3.6.1.4.1.4253.1.30.2.1.14 |
| ocm2Link1AutoDisable mandatory Flag to enable/disable automatic CPE disable for Link 1. | column | Enumeration | .1.3.6.1.4.1.4253.1.30.2.1.15 |
| ocm2Link1LinkName mandatory Link 1 link name for fiber between the local and the
remote card. | column | LinkName | .1.3.6.1.4.1.4253.1.30.2.1.16 |
| ocm2Link1PathID mandatory Link 1 path ID name associated with the module. Set input
equal to NULL will remove the card off the path
and also remove the path if no other modules are
associated with that … | column | PathIdName | .1.3.6.1.4.1.4253.1.30.2.1.17 |
| ocm2Link2LineRate mandatory Link 2 line rate. | column | Enumeration | .1.3.6.1.4.1.4253.1.30.2.1.18 |
| ocm2Link2AutoDisable mandatory Flag to enable/disable automatic CPE disable for Link 2. | column | Enumeration | .1.3.6.1.4.1.4253.1.30.2.1.19 |
| ocm2CardShelf mandatory The shelf where the module resides. | column | CardShelf | .1.3.6.1.4.1.4253.1.30.2.1.2 |
| ocm2Link2LinkName mandatory Link 2 link name for fiber between the local and the
remote card. | column | LinkName | .1.3.6.1.4.1.4253.1.30.2.1.20 |
| ocm2Link2PathID mandatory Link 2 path ID name associated with the module. Set input
equal to NULL will remove the card off the path
and also remove the path if no other modules are
associated with that … | column | PathIdName | .1.3.6.1.4.1.4253.1.30.2.1.21 |
| ocm2AdminState mandatory Administrative control for the module. Default
value is enable. When disabled, no alarms/events are
generated for the module. | column | Enumeration | .1.3.6.1.4.1.4253.1.30.2.1.22 |
| ocm2CleiNum mandatory CLEI number of the module. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.30.2.1.24 |
| ocm2NumPorts mandatory Total port numbers on each OCM2 card. | column | Integer32 | .1.3.6.1.4.1.4253.1.30.2.1.25 |
| ocm2RegenMode mandatory Set or clear OCM2 regen mode. | column | Enumeration | .1.3.6.1.4.1.4253.1.30.2.1.26 |
| ocm2FpgaRev mandatory FPGA revision for the module. | column | Integer32 | .1.3.6.1.4.1.4253.1.30.2.1.27 |
| ocm2CardSlot mandatory The slot within the shelf where the module resides.
The range of valid values range from 1 through 17
depending on the chassis type and the shelf where
the module is in. To d… | column | SlotInput | .1.3.6.1.4.1.4253.1.30.2.1.3 |
| ocm2SerialNum mandatory Module serial number. | column | SerialString | .1.3.6.1.4.1.4253.1.30.2.1.4 |
| ocm2ModelNum mandatory Module model number. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.30.2.1.5 |
| ocm2HwName mandatory Module hardware name. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.30.2.1.6 |
| ocm2HwVersionID mandatory Module hardware version. | column | VersionString | .1.3.6.1.4.1.4253.1.30.2.1.7 |
| ocm2MfgDate mandatory Date and Time of manufacturing of the module | column | DateAndTime | .1.3.6.1.4.1.4253.1.30.2.1.8 |
| ocm2FwName mandatory Module firmware name. | column | CardName | .1.3.6.1.4.1.4253.1.30.2.1.9 |