ocm10gfAutoDisable
LUXN-MIB ·
.1.3.6.1.4.1.4253.1.29.2.1.15
Object
column
mandatory
r/w
Enumeration
Flag to enable/disable the CPE link when a fault is detected. Far end CPE disable is identical to normal CPE disable with the added feature that the local CPE Tx will be disabled if a loss of light condition is detected on the remote CPE Rx.
Context
- MIB
- LUXN-MIB
- OID
.1.3.6.1.4.1.4253.1.29.2.1.15- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- ocm10gfEntry
- Table
- ocm10gfTable
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ocm10gfCardLocation mandatory Location of the module. | column | CardLocation | .1.3.6.1.4.1.4253.1.29.2.1.1 |
| ocm10gfFwVersionID mandatory Firmware version. | column | VersionString | .1.3.6.1.4.1.4253.1.29.2.1.10 |
| ocm10gfFwDate mandatory Firmware release date and time. | column | DateAndTime | .1.3.6.1.4.1.4253.1.29.2.1.11 |
| ocm10gfModelType mandatory Model type of the module. | column | CardType | .1.3.6.1.4.1.4253.1.29.2.1.12 |
| ocm10gfName mandatory User configurable name of the module. | column | CardName | .1.3.6.1.4.1.4253.1.29.2.1.13 |
| ocm10gfLineRate mandatory Port line rate. Valid only for ports 1 and 2. | column | Enumeration | .1.3.6.1.4.1.4253.1.29.2.1.14 |
| ocm10gfLinkName mandatory Link name for fiber between the local and the
remote card. | column | LinkName | .1.3.6.1.4.1.4253.1.29.2.1.16 |
| ocm10gfPathID mandatory Path ID name associated with the module. Set input
equal to NULL will remove the card off the path
and also remove the path if no other modules are
associated with that path. | column | PathIdName | .1.3.6.1.4.1.4253.1.29.2.1.17 |
| ocm10gfAdminState mandatory Administrative control for the module. Default
value is enable. When disabled, no alarms/events are
generated for the module. | column | Enumeration | .1.3.6.1.4.1.4253.1.29.2.1.18 |
| ocm10gfSetState mandatory Instruct the module to do a warmboot. A get on this will
always return 'other'. | column | Enumeration | .1.3.6.1.4.1.4253.1.29.2.1.19 |
| ocm10gfCardShelf mandatory The shelf where the module resides. | column | CardShelf | .1.3.6.1.4.1.4253.1.29.2.1.2 |
| ocm10gfCleiNum mandatory CLEI number of the module. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.29.2.1.20 |
| ocm10gfNumPorts mandatory Total port numbers on each OCM10GF card. | column | Integer32 | .1.3.6.1.4.1.4253.1.29.2.1.21 |
| ocm10gfFpgaRev mandatory FPGA revision for the module. | column | Integer32 | .1.3.6.1.4.1.4253.1.29.2.1.22 |
| ocm10gfCardSlot mandatory The slot within the shelf where the module resides.
The range of valid values range from 1 through 17
depending on the chassis type and the shelf where
the module is in. To d… | column | SlotInput | .1.3.6.1.4.1.4253.1.29.2.1.3 |
| ocm10gfSerialNum mandatory Module serial number. | column | SerialString | .1.3.6.1.4.1.4253.1.29.2.1.4 |
| ocm10gfModelNum mandatory Module model number. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.29.2.1.5 |
| ocm10gfHwName mandatory Module hardware name. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.29.2.1.6 |
| ocm10gfHwVersionID mandatory Module hardware version. | column | VersionString | .1.3.6.1.4.1.4253.1.29.2.1.7 |
| ocm10gfMfgDate mandatory Date and Time of manufacturing of the module | column | DateAndTime | .1.3.6.1.4.1.4253.1.29.2.1.8 |
| ocm10gfFwName mandatory Module firmware name. | column | CardName | .1.3.6.1.4.1.4253.1.29.2.1.9 |