muxPortCardShelf
LUXN-MIB ·
.1.3.6.1.4.1.4253.1.4.8.1.2
Object
column
mandatory
CardShelf
The shelf the card is in. Valid values are: 1 to 2.
Context
- MIB
- LUXN-MIB
- OID
.1.3.6.1.4.1.4253.1.4.8.1.2- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- muxPortEntry
- Table
- muxPortTable
- Siblings
- 17
Syntax
CardShelf
- Source
- CardShelf
- Base type
Integer32
Values & Constraints
Type Constraints
range: 1..2
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| muxPortCardLocation mandatory Location of the MUX's port. Valid values are: Local in
the same chassis, or remote to this chassis | column | CardLocation | .1.3.6.1.4.1.4253.1.4.8.1.1 |
| muxConnSlot mandatory The slot within the shelf the card conn to. To delete a
connection associated with a specified port, set this
variable to 0. Supported by all Mux modules except
MD100-40 & BD4. | column | SlotInput | .1.3.6.1.4.1.4253.1.4.8.1.10 |
| muxConnPort mandatory Conn port for MUX/DMUX's port. Possible values based on
card types that can be connected to are:
FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx
4=Local Rx, 5=Conn B Tx, 6=Con… | column | Integer32 | .1.3.6.1.4.1.4253.1.4.8.1.11 |
| muxPortType mandatory Type of the MUX's port. Supported by all Mux modules except
MD100-40 & BD4. | column | Enumeration | .1.3.6.1.4.1.4253.1.4.8.1.12 |
| muxConnChassisID mandatory Chassis ID of the connected node. User config. If local connection,
a set on it would return an error; would be automatically be set to
the chassis Id of the local node. Support… | column | OctetString | .1.3.6.1.4.1.4253.1.4.8.1.13 |
| muxConnSystemName mandatory System Name of the connected node. User config. If local connection,
a set on it would return an error; would be automatically be set to
the sysetem name of the local node. Supp… | column | OctetString | .1.3.6.1.4.1.4253.1.4.8.1.14 |
| muxConnIpAddress mandatory IpAddress of the connected node. User config. If local
connection, a set on it would return an error; would be automatically
be set to the IP address of the node. Supported by a… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.4253.1.4.8.1.15 |
| muxPortAvgInsertionLoss mandatory Average port insertion loss for the port category.
Valid only for MD100-40 & BD4 modules. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.4.8.1.16 |
| muxPortMaxInsertionLoss mandatory Maximum port insertion loss for the port category.
Valid only for MD100-40 & BD4 modules. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.4.8.1.17 |
| muxPortTapRatio mandatory Tap ratio for the port category.
Valid only for MD100-40 & BD4 modules. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.4.8.1.18 |
| muxPortCardSlot mandatory The slot within the shelf the card is in. | column | SlotInput | .1.3.6.1.4.1.4253.1.4.8.1.3 |
| muxPortIndex mandatory Port's index. Ports 1 through 4 can be use
for connection with OCM family or MCMT1/MCME1 only. | column | Integer32 | .1.3.6.1.4.1.4253.1.4.8.1.4 |
| muxWavelength mandatory Port's wavelength: either ITU number or actual
wavelength in nm. Supported by all Mux modules
except MD100-40 & BD4. | column | Integer32 | .1.3.6.1.4.1.4253.1.4.8.1.5 |
| muxInsertLoss mandatory Mux Port insertion Loss range. Supported by all Mux
modules except MD100-40 & BD4. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.4.8.1.6 |
| muxConnCardType mandatory Module type connected to mux port. Supported by all
Mux modules except MD100-40 & BD4. | column | CardType | .1.3.6.1.4.1.4253.1.4.8.1.7 |
| muxConnLocation mandatory The chassis's location of the card conn to. Supported
by all Mux modules except MD100-40 & BD4. | column | CardLocation | .1.3.6.1.4.1.4253.1.4.8.1.8 |
| muxConnShelf mandatory The shelf the card conn to. Valid values are: 1 to 2.
Supported by all Mux modules except MD100-40 & BD4. | column | ShelfInput | .1.3.6.1.4.1.4253.1.4.8.1.9 |