muxConnIpAddress

LUXN-MIB · .1.3.6.1.4.1.4253.1.4.8.1.15
MIB view Table view

Object

column mandatory r/w RFC1155-SMIIpAddress 
IpAddress of the connected node.  User config. If local
connection, a set on it would return an error; would be automatically
be set to the IP address of the node.  Supported by all Mux modules 
except MD100-40 & BD4.

Context

MIB
LUXN-MIB
OID
.1.3.6.1.4.1.4253.1.4.8.1.15
Type
column
Access
readwrite
Status
mandatory
Parent
muxPortEntry
Table
muxPortTable
Siblings
17

Syntax

RFC1155-SMIIpAddress
Source
RFC1155-SMIIpAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
muxPortCardLocation mandatory
Location of the MUX's port. Valid values are: Local in the same chassis, or remote to this chassis
columnCardLocation.1.3.6.1.4.1.4253.1.4.8.1.1
muxConnSlot mandatory
The slot within the shelf the card conn to. To delete a connection associated with a specified port, set this variable to 0. Supported by all Mux modules except MD100-40 & BD4.
columnSlotInput.1.3.6.1.4.1.4253.1.4.8.1.10
muxConnPort mandatory
Conn port for MUX/DMUX's port. Possible values based on card types that can be connected to are: FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx 4=Local Rx, 5=Conn B Tx, 6=Con…
columnInteger32.1.3.6.1.4.1.4253.1.4.8.1.11
muxPortType mandatory
Type of the MUX's port. Supported by all Mux modules except MD100-40 & BD4.
columnEnumeration.1.3.6.1.4.1.4253.1.4.8.1.12
muxConnChassisID mandatory
Chassis ID of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the chassis Id of the local node. Support…
columnOctetString.1.3.6.1.4.1.4253.1.4.8.1.13
muxConnSystemName mandatory
System Name of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the sysetem name of the local node. Supp…
columnOctetString.1.3.6.1.4.1.4253.1.4.8.1.14
muxPortAvgInsertionLoss mandatory
Average port insertion loss for the port category. Valid only for MD100-40 & BD4 modules.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.4253.1.4.8.1.16
muxPortMaxInsertionLoss mandatory
Maximum port insertion loss for the port category. Valid only for MD100-40 & BD4 modules.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.4253.1.4.8.1.17
muxPortTapRatio mandatory
Tap ratio for the port category. Valid only for MD100-40 & BD4 modules.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.4253.1.4.8.1.18
muxPortCardShelf mandatory
The shelf the card is in. Valid values are: 1 to 2.
columnCardShelf.1.3.6.1.4.1.4253.1.4.8.1.2
muxPortCardSlot mandatory
The slot within the shelf the card is in.
columnSlotInput.1.3.6.1.4.1.4253.1.4.8.1.3
muxPortIndex mandatory
Port's index. Ports 1 through 4 can be use for connection with OCM family or MCMT1/MCME1 only.
columnInteger32.1.3.6.1.4.1.4253.1.4.8.1.4
muxWavelength mandatory
Port's wavelength: either ITU number or actual wavelength in nm. Supported by all Mux modules except MD100-40 & BD4.
columnInteger32.1.3.6.1.4.1.4253.1.4.8.1.5
muxInsertLoss mandatory
Mux Port insertion Loss range. Supported by all Mux modules except MD100-40 & BD4.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.4253.1.4.8.1.6
muxConnCardType mandatory
Module type connected to mux port. Supported by all Mux modules except MD100-40 & BD4.
columnCardType.1.3.6.1.4.1.4253.1.4.8.1.7
muxConnLocation mandatory
The chassis's location of the card conn to. Supported by all Mux modules except MD100-40 & BD4.
columnCardLocation.1.3.6.1.4.1.4253.1.4.8.1.8
muxConnShelf mandatory
The shelf the card conn to. Valid values are: 1 to 2. Supported by all Mux modules except MD100-40 & BD4.
columnShelfInput.1.3.6.1.4.1.4253.1.4.8.1.9