mcmescCardLocation
LUXN-MIB ·
.1.3.6.1.4.1.4253.1.18.6.1.1
Object
column
mandatory
CardLocation
Location of the mcmesc Module.
Context
- MIB
- LUXN-MIB
- OID
.1.3.6.1.4.1.4253.1.18.6.1.1- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- mcmescEntry
- Table
- mcmescTable
- Siblings
- 52
Syntax
CardLocation
- Source
- CardLocation
- Base type
Enumeration
Values & Constraints
Type Values
1 | local |
2 | remote1 |
3 | remote2 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mcmescNumPorts mandatory Total port numbers of MCM module. | column | Integer32 | .1.3.6.1.4.1.4253.1.18.6.1.10 |
| mcmescFWVersionID mandatory The current version string of the MCMESC FW code | column | VersionString | .1.3.6.1.4.1.4253.1.18.6.1.11 |
| mcmesc2ndFWVersionID mandatory The version string of the MCMESC second FW code | column | VersionString | .1.3.6.1.4.1.4253.1.18.6.1.12 |
| mcmescFPGAVersionID mandatory The current version string of the MCMESC FPGA code | column | VersionString | .1.3.6.1.4.1.4253.1.18.6.1.13 |
| mcmesc2ndFPGAVersionID mandatory The version string of the MCMESC second FPGA code | column | VersionString | .1.3.6.1.4.1.4253.1.18.6.1.14 |
| mcmescBoardSerialNum mandatory Serial # of the MCMESC board. | column | SerialString | .1.3.6.1.4.1.4253.1.18.6.1.15 |
| mcmescBoardVersionID mandatory The version string of the MCMESC board | column | VersionString | .1.3.6.1.4.1.4253.1.18.6.1.16 |
| mcmescDaughterBoard1SerialNum mandatory Serial # of the MCMESC daughter board 1. | column | SerialString | .1.3.6.1.4.1.4253.1.18.6.1.17 |
| mcmescDaughterBoard1VersionID mandatory The version string of the MCMESC daughter board 1 | column | VersionString | .1.3.6.1.4.1.4253.1.18.6.1.18 |
| mcmescDaughterBoard2SerialNum mandatory Serial # of the MCMESC daughter board 2. | column | SerialString | .1.3.6.1.4.1.4253.1.18.6.1.19 |
| mcmescCardShelf mandatory The shelf of the mcmesc is in. Valid values are: 1..2 | column | CardShelf | .1.3.6.1.4.1.4253.1.18.6.1.2 |
| mcmescDaughterBoard2VersionID mandatory The version string of the MCMESC daughter board 2 | column | VersionString | .1.3.6.1.4.1.4253.1.18.6.1.20 |
| mcmescCleiNum mandatory CLEI number of the MCMESC Card. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.18.6.1.21 |
| mcmescLinkWavelength mandatory Link Wavelength of the MCMESC card | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.18.6.1.22 |
| mcmescLinkSfpSerialNum mandatory Link port's SFP serial number. | column | SfpSerialString | .1.3.6.1.4.1.4253.1.18.6.1.23 |
| mcmescAdminState mandatory Administrative control over that MCMESC card. Default value is enable.
When disabled, no alarms/events gets generated. | column | Enumeration | .1.3.6.1.4.1.4253.1.18.6.1.24 |
| mcmescLinkName mandatory Link name for fiber between the local and the
remote MCMESC card. | column | LinkName | .1.3.6.1.4.1.4253.1.18.6.1.25 |
| mcmescPathID mandatory Upsr Path ID name that this card is associated with.
Set input equal NULL will remove the card off the path
and also remove the path if there is no card left
associate with th… | column | PathIdName | .1.3.6.1.4.1.4253.1.18.6.1.26 |
| mcmescOverride mandatory MPM overrides the settings stored on MCMESC card upon
detecting it. Default value is no. Not applicable to
remote MCMESC. | column | Enumeration | .1.3.6.1.4.1.4253.1.18.6.1.27 |
| mcmescPerfInterval mandatory The interval, in seconds, in which MCMESC collects the
performance data, ranging 60 to 3600. | column | Integer32 | .1.3.6.1.4.1.4253.1.18.6.1.28 |
| mcmescCpeRxSigLowThreshold mandatory The threshold of reporting CPE port Rx signal low alarm,
in dBm, ranging from -29 to -7. | column | Integer32 | .1.3.6.1.4.1.4253.1.18.6.1.29 |
| mcmescCardSlot mandatory The slot within the shelf the module is in. The range
of valid values range from 1 through 17 depending on
the chassis type and the shelf the module is in.
To delete this card, s… | column | SlotInput | .1.3.6.1.4.1.4253.1.18.6.1.3 |
| mcmescLinkRxSigLowThreshold mandatory The threshold of reporting Link Rx signal low alarm,
in dBm, ranging from -29 to -7. | column | Integer32 | .1.3.6.1.4.1.4253.1.18.6.1.30 |
| mcmescCpeErrEventThreshold mandatory The threshold of reporting CPE error event, in the form of
1.0E-x. Only x needs to be set and will be read. The range
of x is from 5 to 15, however, input should be an
absolute … | column | Integer32 | .1.3.6.1.4.1.4253.1.18.6.1.31 |
| mcmescCpeErrAlarmThreshold mandatory The threshold of reporting CPE error alarm, in the form of
1.0E-x. The range of x is from 4 to 14, however, input
should be an absolute value if using mib browser. This
threshol… | column | Integer32 | .1.3.6.1.4.1.4253.1.18.6.1.32 |
| mcmescLinkErrEventThreshold mandatory The threshold of reporting LINK error event, in the form of
1.0E-x. The range of x is from 5 to 15, however, input
should be an absolute value if using mib browser. This
thresho… | column | Integer32 | .1.3.6.1.4.1.4253.1.18.6.1.33 |
| mcmescLinkErrAlarmThreshold mandatory The threshold of reporting LINK error alarm, in the form of
1.0E-x. The range of x is from 4 to 14, however, input
should be an absolute value if using mib browser. This
threshol… | column | Integer32 | .1.3.6.1.4.1.4253.1.18.6.1.34 |
| mcmescTestSequence mandatory Turn on or off the test-sequence on link. The operation
will take place on the remote MCMESC if it's connected. | column | FlagType | .1.3.6.1.4.1.4253.1.18.6.1.35 |
| mcmescConnMuxShelf mandatory The connected W4CM/UPSM shelf. | column | ShelfInput | .1.3.6.1.4.1.4253.1.18.6.1.36 |
| mcmescConnMuxSlot mandatory The connected W4CM/UPSM slot. | column | SlotInput | .1.3.6.1.4.1.4253.1.18.6.1.37 |
| mcmescConnMuxPort mandatory The connected W4CM/UPSM port.
W4CM: 1=1470/1510, 2=1490/1530, 3=15501590/,
4=1570/1610, 5=EXP, 6=IN/OUT;
UPSM: 1=Link A Tx, 2=Link A Rx, 3=Link B Tx,
4=Link B Rx, 5=Lo… | column | Integer32 | .1.3.6.1.4.1.4253.1.18.6.1.38 |
| mcmescConnDemuxShelf mandatory The connected W4CD/UPSM shelf. | column | ShelfInput | .1.3.6.1.4.1.4253.1.18.6.1.39 |
| mcmescMfgDate mandatory Date and Time of calibration of the mcmesc card | column | DateAndTime | .1.3.6.1.4.1.4253.1.18.6.1.4 |
| mcmescConnDemuxSlot mandatory The connected W4CD/UPSM slot. | column | SlotInput | .1.3.6.1.4.1.4253.1.18.6.1.40 |
| mcmescConnDemuxPort mandatory The connected W4CD/UPSM port.
W4CD: 1=1470/1510, 2=1490/1530, 3=15501590/,
4=1570/1610, 5=EXP, 6=IN/OUT;
UPSM: 1=Link A Tx, 2=Link A Rx, 3=Link B Tx,
4=Link B Rx, 5=Lo… | column | Integer32 | .1.3.6.1.4.1.4253.1.18.6.1.41 |
| mcmescConnTxOcmShelf mandatory The connected OCM shelf (from MCMESC's Link Tx). | column | ShelfInput | .1.3.6.1.4.1.4253.1.18.6.1.42 |
| mcmescConnTxOcmSlot mandatory The connected OCM slot (from MCMESC's Link Tx). | column | SlotInput | .1.3.6.1.4.1.4253.1.18.6.1.43 |
| mcmescConnTxOcmPort mandatory The connected OCM port (from MCMESC's Link Tx).
3=OCM's CPE-Tx, 4=OCM's Rx. Only 4 is valid. | column | Enumeration | .1.3.6.1.4.1.4253.1.18.6.1.44 |
| mcmescConnTxOcmShelfSlot mandatory Add a connection from MCMESC Link-Tx to an OCM CPE-Rx by
specifying the OCM's shelf and slot. The format is shlef,slot.
If either MCMESC Link-Tx or specified OCM CPE-Rx has alread… | column | OctetString | .1.3.6.1.4.1.4253.1.18.6.1.45 |
| mcmescConnTxOcmDelete mandatory Delete a connection from MCMESC Link-Tx to an OCM CPE-Rx.
If MCMESC's Link-Tx has no connection with any OCM's CPE-Rx,
an error will be returned.
A get on this variable will alwa… | column | Enumeration | .1.3.6.1.4.1.4253.1.18.6.1.46 |
| mcmescConnRxOcmShelf mandatory The connected OCM shelf (from MCMESC's Link Rx). | column | ShelfInput | .1.3.6.1.4.1.4253.1.18.6.1.47 |
| mcmescConnRxOcmSlot mandatory The connected OCM slot (from MCMESC's Link Rx). | column | SlotInput | .1.3.6.1.4.1.4253.1.18.6.1.48 |
| mcmescConnRxOcmPort mandatory The connected OCM port (from MCMESC's Link Rx).
3=OCM's CPE-Tx, 4=OCM's Rx. Only 3 is valid. | column | Enumeration | .1.3.6.1.4.1.4253.1.18.6.1.49 |
| mcmescSerialNum mandatory Serial # of the mcmesc card. | column | SerialString | .1.3.6.1.4.1.4253.1.18.6.1.5 |
| mcmescConnRxOcmShelfSlot mandatory Add a connection from MCMESC Link-Rx to an OCM CPE-Tx by
specifying the OCM's shelf and slot. The format is shlef,slot.
If either MCMESC Link-Tx or specified OCM CPE-Rx has alread… | column | OctetString | .1.3.6.1.4.1.4253.1.18.6.1.50 |
| mcmescConnRxOcmDelete mandatory Delete a connection from MCMESC Link-Rx to an OCM CPE-Tx.
If MCMESC's Link-Rx has no connection with any OCM's CPE-Tx,
an error will be returned.
A get on this variable will alway… | column | Enumeration | .1.3.6.1.4.1.4253.1.18.6.1.51 |
| mcmescSetState mandatory Instruct the mcmesc card to do either a reset or loopback.
A get on this will always return an other. If the card is
in self-test, an error will be returned. If the card is
alrea… | column | Enumeration | .1.3.6.1.4.1.4253.1.18.6.1.52 |
| mcmescLinkClrErrCount mandatory Instruct the mcmesc card to clear the bit-error count for
link port. A get on this will always return an other. | column | Enumeration | .1.3.6.1.4.1.4253.1.18.6.1.53 |
| mcmescModelType mandatory Model type of the mcmesc | column | CardType | .1.3.6.1.4.1.4253.1.18.6.1.6 |
| mcmescModelNum mandatory Model number of the MCMESC card. Up to 15 characters | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4253.1.18.6.1.7 |
| mcmescName mandatory Display (Network) name of the MCMESC Module | column | CardName | .1.3.6.1.4.1.4253.1.18.6.1.8 |
| mcmescHWName mandatory Display Hardware name of the MCMESC Card. | column | CardName | .1.3.6.1.4.1.4253.1.18.6.1.9 |