mcmPerfLocation
LUXN-MIB ·
.1.3.6.1.4.1.4253.2.1.9.3.1.1
Object
column
mandatory
CardLocation
The location of the card. Valid choices are Local or Remote. The system automatically selects this value based on the known (available) mcmt1/mcme1 cards.
Context
- MIB
- LUXN-MIB
- OID
.1.3.6.1.4.1.4253.2.1.9.3.1.1- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- mcmPerfEntry
- Table
- mcmPerfTable
- Siblings
- 17
Syntax
CardLocation
- Source
- CardLocation
- Base type
Enumeration
Values & Constraints
Type Values
1 | local |
2 | remote1 |
3 | remote2 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mcmModulation mandatory The frequency modulation for the optical laser. This
value can be adjusted remotely. | column | Integer32 | .1.3.6.1.4.1.4253.2.1.9.3.1.10 |
| mcmApc mandatory The APC value. This value can be set remotely. | column | Integer32 | .1.3.6.1.4.1.4253.2.1.9.3.1.11 |
| mcmIwmModulation mandatory The frequency modulation for the IWM channel. This
value can be adjusted remotely. | column | Integer32 | .1.3.6.1.4.1.4253.2.1.9.3.1.12 |
| mcmLaserOnOff mandatory The laser On/Off flag. This value can be set
remotely. | column | FlagType | .1.3.6.1.4.1.4253.2.1.9.3.1.13 |
| mcmTemperature mandatory The current temperature, or the operating temperature
of the optical device. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.4253.2.1.9.3.1.14 |
| mcmIntensity mandatory The intensity of the optical light. This value can
be set remotely. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.4253.2.1.9.3.1.15 |
| mcmSignalStrength mandatory The current signal strength for the optical path. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.4253.2.1.9.3.1.16 |
| mcmLossOfLight mandatory If set to true, no laser light is present. If set to
false, no loss of light has occurred. | column | Boolean | .1.3.6.1.4.1.4253.2.1.9.3.1.17 |
| mcmSignalDetect mandatory If set to true, signal is detected. If set to false,
no signal is present. | column | Boolean | .1.3.6.1.4.1.4253.2.1.9.3.1.18 |
| mcmPerfShelf mandatory The shelf the card is in. Valid values are: 1 to 3 | column | CardShelf | .1.3.6.1.4.1.4253.2.1.9.3.1.2 |
| mcmPerfSlot mandatory The slot within the shelf the card is in. Valid
values are: 1 to 21 | column | CardSlot | .1.3.6.1.4.1.4253.2.1.9.3.1.3 |
| mcmPerfState mandatory The state of the mcmt1/mcme1 card. The states' are:
online, offline, empty, loopback or diagnostics. | column | CardState | .1.3.6.1.4.1.4253.2.1.9.3.1.4 |
| mcmPerfStatus mandatory The status of the channel card. This
status represents the status of the communication
processor and in general is different from the
status of the system. | column | CardStatus | .1.3.6.1.4.1.4253.2.1.9.3.1.5 |
| mcmLastBootTime mandatory The date and time of the last boot for this card. | column | DateAndTime | .1.3.6.1.4.1.4253.2.1.9.3.1.6 |
| mcmAvailTime mandatory The number of seconds in this time slot (15 minutes)
that this mcmt1/mcme1 has been up and running. This will
generally be the same as 15 minutes in seconds (900). | column | RFC1155-SMICounter | .1.3.6.1.4.1.4253.2.1.9.3.1.7 |
| mcmErrFreeSecs mandatory The number of seconds in this time slot (15 minutes)
that this mcmt1/mcme1 has not experienced any alarms. | column | RFC1155-SMICounter | .1.3.6.1.4.1.4253.2.1.9.3.1.8 |
| mcmBiasCurrent mandatory Bias current for the optical laser. This value can
be set remotely | column | Integer32 | .1.3.6.1.4.1.4253.2.1.9.3.1.9 |