cpSNMPTrapHost3
LUXN-MIB ·
.1.3.6.1.4.1.4253.1.2.12
Object
IP Address of the third SNMP Trap host. A NULL IP address means no TRAP should be sent to this address. Duplicate IP addresses will be rejected.
Syntax
RFC1155-SMIIpAddress
- Source
- RFC1155-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpIpAddress mandatory IP Address of the Active Communication Processor | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.4253.1.2.1 |
| cpSNMPTrapHost1 mandatory IP Address of the first SNMP Trap host. A NULL IP
address means no TRAP should be sent to this address.
Duplicate IP addresses will be rejected. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.4253.1.2.10 |
| cpSNMPTrapHost2 mandatory IP Address of the second SNMP Trap host. A NULL IP
address means no TRAP should be sent to this address.
Duplicate IP addresses will be rejected. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.4253.1.2.11 |
| cpSNMPSendTrap mandatory If set to true, traps will be sent out. If set to
false, traps will not be sent out. This variable
is reset to true (enable) on each boot cycle. | scalar | Boolean | .1.3.6.1.4.1.4253.1.2.13 |
| cpGateway mandatory Gateway IP Address of the Active Communication Processor. A
NULL IP address means Gateway hasn't been configured. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.4253.1.2.14 |
| cpMaxSessions mandatory Maximum allowed Telnet Sessions on the Active Communication
Processor. Valid values are 1 to 6. | scalar | Integer32 | .1.3.6.1.4.1.4253.1.2.15 |
| cpSessionTimeout mandatory Maximum timeout (in seconds) that can be set for a
Telnet session on the Active Communication Processor.
Valid values are greater than 30 secs. | scalar | Integer32 | .1.3.6.1.4.1.4253.1.2.16 |
| cpDate mandatory Current Date on the Active Communication Processor.
The format is in the form of mm-dd-yy in which mm
is the two digit month, dd is the two digit day of
the month, and yy is the t… | scalar | DateAndTime | .1.3.6.1.4.1.4253.1.2.17 |
| cpTime mandatory Current Time on the Active Communication Processor.
The format is in the form of hh:mm:ss in which
hh is the hour, mm is the minute and ss is the
second. The valid values for hou… | scalar | DateAndTime | .1.3.6.1.4.1.4253.1.2.18 |
| cpGetCommunity mandatory User configurable SNMP Get Community String. | scalar | EncryptedCommunity | .1.3.6.1.4.1.4253.1.2.19 |
| cpNetMask mandatory Net mask for the Active Communication Processor | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.4253.1.2.2 |
| cpSetCommunity mandatory User Configurable SNMP Set Community String. | scalar | EncryptedCommunity | .1.3.6.1.4.1.4253.1.2.20 |
| cpSystemName mandatory User Configurable System Name. | scalar | OctetString | .1.3.6.1.4.1.4253.1.2.21 |
| cpSNMPTrapCommunity1 mandatory User configurable trap community string for first trap host.
Will return an error if the corresponding trap host is
invalid or not set. | scalar | EncryptedCommunity | .1.3.6.1.4.1.4253.1.2.22 |
| cpSNMPTrapCommunity2 mandatory User configurable trap community string for second trap host.
Will return an error if the corresponding trap host is
invalid or not set. | scalar | EncryptedCommunity | .1.3.6.1.4.1.4253.1.2.23 |
| cpSNMPTrapCommunity3 mandatory User configurable trap community string for third trap host.
Will return an error if the corresponding trap host is
invalid or not set. | scalar | EncryptedCommunity | .1.3.6.1.4.1.4253.1.2.24 |
| cpHttp mandatory HTTP server enabled or not. | scalar | Enumeration | .1.3.6.1.4.1.4253.1.2.25 |
| cpIMNIpAddress mandatory IMN Ip address. Use for IP/IWM | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.4253.1.2.26 |
| cpUpsrMode mandatory UPSR mode: enable and disable. | scalar | Enumeration | .1.3.6.1.4.1.4253.1.2.27 |
| cpAutoModuleUpdate mandatory Flag to automatically enable/disable module update. | scalar | Enumeration | .1.3.6.1.4.1.4253.1.2.28 |
| cpSNMPTrapHost4 mandatory IP Address of the fourth SNMP Trap host. A NULL IP
address means no TRAP should be sent to this address.
Duplicate IP addresses will be rejected. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.4253.1.2.29 |
| cpMIBVersion mandatory Version of the LuxN MIB implemented by this device.
This value may be reset everytime a new CP code
is downloaded. | scalar | VersionString | .1.3.6.1.4.1.4253.1.2.3 |
| cpSNMPTrapHost5 mandatory IP Address of the fifth SNMP Trap host. A NULL IP
address means no TRAP should be sent to this address.
Duplicate IP addresses will be rejected. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.4253.1.2.30 |
| cpSNMPTrapCommunity4 mandatory User configurable trap community string for fourth trap host.
Will return an error if the corresponding trap host is
invalid or not set. | scalar | EncryptedCommunity | .1.3.6.1.4.1.4253.1.2.31 |
| cpSNMPTrapCommunity5 mandatory User configurable trap community string for fifth trap host.
Will return an error if the corresponding trap host is
invalid or not set. | scalar | EncryptedCommunity | .1.3.6.1.4.1.4253.1.2.32 |
| cpSNMPTrapHostPort1 mandatory User configurable trap port for the first trap host.
Default value is 162 | scalar | Integer32 | .1.3.6.1.4.1.4253.1.2.33 |
| cpSNMPTrapHostPort2 mandatory User configurable trap port for the second trap host.
Default value is 162 | scalar | Integer32 | .1.3.6.1.4.1.4253.1.2.34 |
| cpSNMPTrapHostPort3 mandatory User configurable trap port for the third trap host.
Default value is 162 | scalar | Integer32 | .1.3.6.1.4.1.4253.1.2.35 |
| cpSNMPTrapHostPort4 mandatory User configurable trap port for the fourth trap host.
Default value is 162 | scalar | Integer32 | .1.3.6.1.4.1.4253.1.2.36 |
| cpSNMPTrapHostPort5 mandatory User configurable trap port for the fifth trap host.
Default value is 162 | scalar | Integer32 | .1.3.6.1.4.1.4253.1.2.37 |
| cpRedunSubDivTable mandatory This table represents the number of sub divisions
and the size of each subdivision in ROM memory
of redundant (standby) MPM | table | - | .1.3.6.1.4.1.4253.1.2.38 |
| cpTimezone mandatory Specifies the internation time zone used by the
MPM to determine system time. The time zone is
only used to system time calculations when NTP
is enabled | scalar | Timezone | .1.3.6.1.4.1.4253.1.2.39 |
| cpBootPromVer mandatory The current version string of the Boot PROM code | scalar | VersionString | .1.3.6.1.4.1.4253.1.2.4 |
| cpNtpState mandatory Specifies whether NTP support is enabled or
disabled. | scalar | Enumeration | .1.3.6.1.4.1.4253.1.2.40 |
| cpNtpTimeserver mandatory Specifies the NTP time server queries for updates. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.4253.1.2.41 |
| cpNtpUpdateInterval mandatory Specifies the NTP time update interval in minutes. | scalar | Integer32 | .1.3.6.1.4.1.4253.1.2.42 |
| cpTelnetClient mandatory Enable/disable telnet client for active telnet sessions. | scalar | Enumeration | .1.3.6.1.4.1.4253.1.2.43 |
| cpLogMask mandatory Set the log mask. The masks are equivalent to
syslog priorities. | scalar | Enumeration | .1.3.6.1.4.1.4253.1.2.44 |
| cpLogServer1 mandatory IP Address of the first log server. A NULL IP
address will remove this entry. Duplicate IP
addresses will be rejected. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.4253.1.2.45 |
| cpLogServer2 mandatory IP Address of the first log server. A NULL IP
address will remove this entry. Duplicate IP
addresses will be rejected. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.4253.1.2.46 |
| cpLogServer3 mandatory IP Address of the first log server. A NULL IP
address will remove this entry. Duplicate IP
addresses will be rejected. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.4253.1.2.47 |
| cpLogServer4 mandatory IP Address of the first log server. A NULL IP
address will remove this entry. Duplicate IP
addresses will be rejected. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.4253.1.2.48 |
| cpLogServer5 mandatory IP Address of the first log server. A NULL IP
address will remove this entry. Duplicate IP
addresses will be rejected. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.4253.1.2.49 |
| cpROMSize mandatory Total Size of the ROM in Kilobyes | scalar | Integer32 | .1.3.6.1.4.1.4253.1.2.5 |
| cpNumSubDiv mandatory Number of the subdivisions of the ROM. | scalar | Integer32 | .1.3.6.1.4.1.4253.1.2.6 |
| cpSubDivTable mandatory This table represents the number of sub divisions
and the size of each subdivision in ROM memory | table | - | .1.3.6.1.4.1.4253.1.2.7 |
| cpTable mandatory This table represents the information for each
active or standby communication processor | table | - | .1.3.6.1.4.1.4253.1.2.8 |
| cpSetMode mandatory Toggle the Active/Standby mode of the active CP. | scalar | RedundancyMode | .1.3.6.1.4.1.4253.1.2.9 |