cpGateway

LUXN-MIB · .1.3.6.1.4.1.4253.1.2.14
MIB view Table view

Object

scalar mandatory r/w RFC1155-SMIIpAddress 
Gateway IP Address of the Active Communication Processor.  A
NULL IP address means Gateway hasn't been configured.

Context

MIB
LUXN-MIB
OID
.1.3.6.1.4.1.4253.1.2.14
Type
scalar
Access
readwrite
Status
mandatory
Parent
cp
Siblings
48

Syntax

RFC1155-SMIIpAddress
Source
RFC1155-SMIIpAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cpIpAddress mandatory
IP Address of the Active Communication Processor
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4253.1.2.1
cpSNMPTrapHost1 mandatory
IP Address of the first SNMP Trap host. A NULL IP address means no TRAP should be sent to this address. Duplicate IP addresses will be rejected.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4253.1.2.10
cpSNMPTrapHost2 mandatory
IP Address of the second SNMP Trap host. A NULL IP address means no TRAP should be sent to this address. Duplicate IP addresses will be rejected.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4253.1.2.11
cpSNMPTrapHost3 mandatory
IP Address of the third SNMP Trap host. A NULL IP address means no TRAP should be sent to this address. Duplicate IP addresses will be rejected.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4253.1.2.12
cpSNMPSendTrap mandatory
If set to true, traps will be sent out. If set to false, traps will not be sent out. This variable is reset to true (enable) on each boot cycle.
scalarBoolean.1.3.6.1.4.1.4253.1.2.13
cpMaxSessions mandatory
Maximum allowed Telnet Sessions on the Active Communication Processor. Valid values are 1 to 6.
scalarInteger32.1.3.6.1.4.1.4253.1.2.15
cpSessionTimeout mandatory
Maximum timeout (in seconds) that can be set for a Telnet session on the Active Communication Processor. Valid values are greater than 30 secs.
scalarInteger32.1.3.6.1.4.1.4253.1.2.16
cpDate mandatory
Current Date on the Active Communication Processor. The format is in the form of mm-dd-yy in which mm is the two digit month, dd is the two digit day of the month, and yy is the t…
scalarDateAndTime.1.3.6.1.4.1.4253.1.2.17
cpTime mandatory
Current Time on the Active Communication Processor. The format is in the form of hh:mm:ss in which hh is the hour, mm is the minute and ss is the second. The valid values for hou…
scalarDateAndTime.1.3.6.1.4.1.4253.1.2.18
cpGetCommunity mandatory
User configurable SNMP Get Community String.
scalarEncryptedCommunity.1.3.6.1.4.1.4253.1.2.19
cpNetMask mandatory
Net mask for the Active Communication Processor
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4253.1.2.2
cpSetCommunity mandatory
User Configurable SNMP Set Community String.
scalarEncryptedCommunity.1.3.6.1.4.1.4253.1.2.20
cpSystemName mandatory
User Configurable System Name.
scalarOctetString.1.3.6.1.4.1.4253.1.2.21
cpSNMPTrapCommunity1 mandatory
User configurable trap community string for first trap host. Will return an error if the corresponding trap host is invalid or not set.
scalarEncryptedCommunity.1.3.6.1.4.1.4253.1.2.22
cpSNMPTrapCommunity2 mandatory
User configurable trap community string for second trap host. Will return an error if the corresponding trap host is invalid or not set.
scalarEncryptedCommunity.1.3.6.1.4.1.4253.1.2.23
cpSNMPTrapCommunity3 mandatory
User configurable trap community string for third trap host. Will return an error if the corresponding trap host is invalid or not set.
scalarEncryptedCommunity.1.3.6.1.4.1.4253.1.2.24
cpHttp mandatory
HTTP server enabled or not.
scalarEnumeration.1.3.6.1.4.1.4253.1.2.25
cpIMNIpAddress mandatory
IMN Ip address. Use for IP/IWM
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4253.1.2.26
cpUpsrMode mandatory
UPSR mode: enable and disable.
scalarEnumeration.1.3.6.1.4.1.4253.1.2.27
cpAutoModuleUpdate mandatory
Flag to automatically enable/disable module update.
scalarEnumeration.1.3.6.1.4.1.4253.1.2.28
cpSNMPTrapHost4 mandatory
IP Address of the fourth SNMP Trap host. A NULL IP address means no TRAP should be sent to this address. Duplicate IP addresses will be rejected.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4253.1.2.29
cpMIBVersion mandatory
Version of the LuxN MIB implemented by this device. This value may be reset everytime a new CP code is downloaded.
scalarVersionString.1.3.6.1.4.1.4253.1.2.3
cpSNMPTrapHost5 mandatory
IP Address of the fifth SNMP Trap host. A NULL IP address means no TRAP should be sent to this address. Duplicate IP addresses will be rejected.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4253.1.2.30
cpSNMPTrapCommunity4 mandatory
User configurable trap community string for fourth trap host. Will return an error if the corresponding trap host is invalid or not set.
scalarEncryptedCommunity.1.3.6.1.4.1.4253.1.2.31
cpSNMPTrapCommunity5 mandatory
User configurable trap community string for fifth trap host. Will return an error if the corresponding trap host is invalid or not set.
scalarEncryptedCommunity.1.3.6.1.4.1.4253.1.2.32
cpSNMPTrapHostPort1 mandatory
User configurable trap port for the first trap host. Default value is 162
scalarInteger32.1.3.6.1.4.1.4253.1.2.33
cpSNMPTrapHostPort2 mandatory
User configurable trap port for the second trap host. Default value is 162
scalarInteger32.1.3.6.1.4.1.4253.1.2.34
cpSNMPTrapHostPort3 mandatory
User configurable trap port for the third trap host. Default value is 162
scalarInteger32.1.3.6.1.4.1.4253.1.2.35
cpSNMPTrapHostPort4 mandatory
User configurable trap port for the fourth trap host. Default value is 162
scalarInteger32.1.3.6.1.4.1.4253.1.2.36
cpSNMPTrapHostPort5 mandatory
User configurable trap port for the fifth trap host. Default value is 162
scalarInteger32.1.3.6.1.4.1.4253.1.2.37
cpRedunSubDivTable mandatory
This table represents the number of sub divisions and the size of each subdivision in ROM memory of redundant (standby) MPM
table-.1.3.6.1.4.1.4253.1.2.38
cpTimezone mandatory
Specifies the internation time zone used by the MPM to determine system time. The time zone is only used to system time calculations when NTP is enabled
scalarTimezone.1.3.6.1.4.1.4253.1.2.39
cpBootPromVer mandatory
The current version string of the Boot PROM code
scalarVersionString.1.3.6.1.4.1.4253.1.2.4
cpNtpState mandatory
Specifies whether NTP support is enabled or disabled.
scalarEnumeration.1.3.6.1.4.1.4253.1.2.40
cpNtpTimeserver mandatory
Specifies the NTP time server queries for updates.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4253.1.2.41
cpNtpUpdateInterval mandatory
Specifies the NTP time update interval in minutes.
scalarInteger32.1.3.6.1.4.1.4253.1.2.42
cpTelnetClient mandatory
Enable/disable telnet client for active telnet sessions.
scalarEnumeration.1.3.6.1.4.1.4253.1.2.43
cpLogMask mandatory
Set the log mask. The masks are equivalent to syslog priorities.
scalarEnumeration.1.3.6.1.4.1.4253.1.2.44
cpLogServer1 mandatory
IP Address of the first log server. A NULL IP address will remove this entry. Duplicate IP addresses will be rejected.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4253.1.2.45
cpLogServer2 mandatory
IP Address of the first log server. A NULL IP address will remove this entry. Duplicate IP addresses will be rejected.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4253.1.2.46
cpLogServer3 mandatory
IP Address of the first log server. A NULL IP address will remove this entry. Duplicate IP addresses will be rejected.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4253.1.2.47
cpLogServer4 mandatory
IP Address of the first log server. A NULL IP address will remove this entry. Duplicate IP addresses will be rejected.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4253.1.2.48
cpLogServer5 mandatory
IP Address of the first log server. A NULL IP address will remove this entry. Duplicate IP addresses will be rejected.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4253.1.2.49
cpROMSize mandatory
Total Size of the ROM in Kilobyes
scalarInteger32.1.3.6.1.4.1.4253.1.2.5
cpNumSubDiv mandatory
Number of the subdivisions of the ROM.
scalarInteger32.1.3.6.1.4.1.4253.1.2.6
cpSubDivTable mandatory
This table represents the number of sub divisions and the size of each subdivision in ROM memory
table-.1.3.6.1.4.1.4253.1.2.7
cpTable mandatory
This table represents the information for each active or standby communication processor
table-.1.3.6.1.4.1.4253.1.2.8
cpSetMode mandatory
Toggle the Active/Standby mode of the active CP.
scalarRedundancyMode.1.3.6.1.4.1.4253.1.2.9