ccCpeReEnableThreshold

LUXN-MIB · .1.3.6.1.4.1.4253.1.3.6.1.44
MIB view Table view

Object

column mandatory r/w Integer32 
CPE Re-enable threshold (Link Rx Power) in dBm.  The limit 
is from -31 to -7, but input should be an absolute value 
if using mib browser.  A value of 0 in this field indicates
that UPSR is not supported. This value will not take affect
until ccLinkAutoDisable has been enabled.

Context

MIB
LUXN-MIB
OID
.1.3.6.1.4.1.4253.1.3.6.1.44
Type
column
Access
readwrite
Status
mandatory
Parent
ccEntry
Table
ccTable
Siblings
65

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ccCardLocation mandatory
Location of the card. Valid values are: Local in the same chassis, or remote to this chassis
columnCardLocation.1.3.6.1.4.1.4253.1.3.6.1.1
ccMfgModulation mandatory
The frequency modulation for the optical laser. This value is the preset manufacturing value.
columnInteger32.1.3.6.1.4.1.4253.1.3.6.1.10
ccMfgApc mandatory
The APC value. This value is the preset manufacturing value
columnInteger32.1.3.6.1.4.1.4253.1.3.6.1.11
ccMfgIwmModulation mandatory
The frequency modulation for the IWM channel. This value is the preset manufacturing value
columnInteger32.1.3.6.1.4.1.4253.1.3.6.1.12
ccMfgRefClock mandatory
The value of the reference clock in decimal notation. For a given value, like 1660-EN, the actual value is 16.60-EN. In otherwords, assume a two digit decimal point, plus any app…
columnEnumeration.1.3.6.1.4.1.4253.1.3.6.1.13
ccMfgClockDiv mandatory
The clock divisor. Values are 1250, 622 or 155 in the appropriate clock frequency scale.
columnEnumeration.1.3.6.1.4.1.4253.1.3.6.1.14
ccBandwidth mandatory
The bandwidth of the channel card.
columnEnumeration.1.3.6.1.4.1.4253.1.3.6.1.15
ccSetState mandatory
Instruct the CC to do a warmboot or loopback. A get on this will always return an other.
columnEnumeration.1.3.6.1.4.1.4253.1.3.6.1.16
connMuxChassis mandatory
The connected mux chassis.
columnInteger32.1.3.6.1.4.1.4253.1.3.6.1.17
connMuxShelf mandatory
The connected mux shelf.
columnShelfInput.1.3.6.1.4.1.4253.1.3.6.1.18
connMuxSlot mandatory
The connected mux slot.
columnSlotInput.1.3.6.1.4.1.4253.1.3.6.1.19
ccCardShelf mandatory
The shelf the card is in. Valid values are: 1 to 2
columnCardShelf.1.3.6.1.4.1.4253.1.3.6.1.2
connMuxPort mandatory
The connected mux port.
columnInteger32.1.3.6.1.4.1.4253.1.3.6.1.20
connDemuxChassis mandatory
The connected demux chassis.
columnInteger32.1.3.6.1.4.1.4253.1.3.6.1.21
connDemuxShelf mandatory
The connected demux shelf.
columnShelfInput.1.3.6.1.4.1.4253.1.3.6.1.22
connDemuxSlot mandatory
The connected demux slot.
columnSlotInput.1.3.6.1.4.1.4253.1.3.6.1.23
connDemuxPort mandatory
The connected demux port.
columnInteger32.1.3.6.1.4.1.4253.1.3.6.1.24
ccModelNum mandatory
Model number of the CC card. Up to 15 characters
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.4253.1.3.6.1.25
ccLinkITUNum mandatory
Link ITU number of the CC card. Up to 15 characters
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.4253.1.3.6.1.26
ccLinkWavelength mandatory
Link Wavelength of the CC card
columnOctetString.1.3.6.1.4.1.4253.1.3.6.1.27
ccLaserType mandatory
Laser Type of the Channel Card.
columnEnumeration.1.3.6.1.4.1.4253.1.3.6.1.28
ccRecvDiode mandatory
Receive Diode of the Channel Card.
columnEnumeration.1.3.6.1.4.1.4253.1.3.6.1.29
ccCardSlot mandatory
The slot within the shelf the module is in. The range of valid values range from 1 through 17 depending on the chassis type and the shelf the module is in. To delete this card, s…
columnSlotInput.1.3.6.1.4.1.4253.1.3.6.1.3
ccLinkAutoDisable mandatory
Flag to enable/disable the CPE link when the threshold value crosses the lower hysteresis limit. The default value is disable. CPE disable with CPE Rx pass through is identical t…
columnEnumeration.1.3.6.1.4.1.4253.1.3.6.1.30
ccLinkName mandatory
Link name for fiber between the local and the remote cc card.
columnLinkName.1.3.6.1.4.1.4253.1.3.6.1.31
ccCsimModule mandatory
Whether colorSIM module is physically present, not installed or preconfigured.
columnEnumeration.1.3.6.1.4.1.4253.1.3.6.1.32
ccHWName mandatory
Display Hardware name of the CC Card.
columnCardName.1.3.6.1.4.1.4253.1.3.6.1.33
ccBackpackModule mandatory
Presence of Backpack module, installed or not Installed.
columnEnumeration.1.3.6.1.4.1.4253.1.3.6.1.34
ccBackpackRxITUNumber mandatory
Rx ITU number of backpack.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.4253.1.3.6.1.35
ccBackpackTxITUNumber mandatory
Tx ITU number of backpack.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.4253.1.3.6.1.36
ccBackpackRxInsertionLoss mandatory
Rx Insertion loss of backpack.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.4253.1.3.6.1.37
ccBackpackTxInsertionLoss mandatory
Tx Insertion loss of backpack.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.4253.1.3.6.1.38
ccBackpackRxExpressLoss mandatory
Rx Express loss of backpack.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.4253.1.3.6.1.39
ccMfgDate mandatory
Date and Time of calibration of the CC card
columnDateAndTime.1.3.6.1.4.1.4253.1.3.6.1.4
ccBackpackTxExpressLoss mandatory
Tx Express loss of backpack.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.4253.1.3.6.1.40
ccSwitchByShelfSlot mandatory
Initiate manual UPSR switching by shelf and slot.
columnOctetString.1.3.6.1.4.1.4253.1.3.6.1.41
ccPathID mandatory
Upsr Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card left associate with th…
columnPathIdName.1.3.6.1.4.1.4253.1.3.6.1.42
ccCpeDisableThreshold mandatory
CPE Disable Threshold (Link Rx Power) in dBm. The limit is from -32 to -8, but input should be an absolute value if using mib browser. A value of 0 in this field indicates tha…
columnInteger32.1.3.6.1.4.1.4253.1.3.6.1.43
connTxNonMuxDmuxCardType mandatory
Type of module connected to Tx port of OCM.
columnCardType.1.3.6.1.4.1.4253.1.3.6.1.45
connTxNonMuxDmuxPort mandatory
Conn port for CC's Tx port.Possible values based on card types that can connect to OCM are: FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx 4=Local Rx, 5=Conn B Tx, 6=Conn B R…
columnInteger32.1.3.6.1.4.1.4253.1.3.6.1.46
connTxNonMuxDmuxShelf mandatory
The shelf the card conn to Tx port of OCM. Valid values are: 1 to 10.
columnShelfInput.1.3.6.1.4.1.4253.1.3.6.1.47
connTxNonMuxDmuxSlot mandatory
The slot within the shelf the card conn to Tx port of OCM.
columnSlotInput.1.3.6.1.4.1.4253.1.3.6.1.48
connRxNonMuxDmuxCardType mandatory
Type of module connected to Rx port of OCM.
columnCardType.1.3.6.1.4.1.4253.1.3.6.1.49
ccSerialNum mandatory
Serial # of the CC card.
columnSerialString.1.3.6.1.4.1.4253.1.3.6.1.5
connRxNonMuxDmuxPort mandatory
Conn port for CC's Rx port.Possible values based on card types that can connect to OCM are: FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx 4=Local Rx, 5=Conn B Tx, 6=Conn B R…
columnInteger32.1.3.6.1.4.1.4253.1.3.6.1.50
connRxNonMuxDmuxShelf mandatory
The shelf the card conn to Rx port of OCM. Valid values are: 1 to 10.
columnShelfInput.1.3.6.1.4.1.4253.1.3.6.1.51
connRxNonMuxDmuxSlot mandatory
The slot within the shelf the card conn to Rx port of OCM.
columnSlotInput.1.3.6.1.4.1.4253.1.3.6.1.52
ccUpsrMode mandatory
UPSR mode for CC card: primary or backup. If not in upsr configuration, value is na. This value will not take affect until ccLinkAutoDisable has been enabled.
columnEnumeration.1.3.6.1.4.1.4253.1.3.6.1.53
ccPairShelf mandatory
The shelf of other CC card in pair.
columnInteger32.1.3.6.1.4.1.4253.1.3.6.1.54
ccPairSlot mandatory
The slot of other CC card in pair. Input 0 to unpair OCMs and delete RSM connections if any.
columnInteger32.1.3.6.1.4.1.4253.1.3.6.1.55
ccAdminState mandatory
Administrative control over that cc card. Default value is enable. When disabled, no alarms/events gets generated. For remote CC, the default value is disabled
columnEnumeration.1.3.6.1.4.1.4253.1.3.6.1.56
ccRegenPairShelf mandatory
The shelf of other CC card in OCM regeneration pair. This value will not take affect until ccLinkAutoDisable has been enabled.
columnInteger32.1.3.6.1.4.1.4253.1.3.6.1.57
ccRegenPairSlot mandatory
The slot of other CC card in OCM regeneration pair. Input 0 to unpair OCMs involved. This value will not take affect until ccLinkAutoDisable has been enabled.
columnInteger32.1.3.6.1.4.1.4253.1.3.6.1.58
ccCleiNum mandatory
CLEI number of the CC Card.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.4253.1.3.6.1.59
ccModelType mandatory
Model type of the channel card.
columnCardType.1.3.6.1.4.1.4253.1.3.6.1.6
connCpeTxMcmescShelf mandatory
The connected MCMESC shelf.
columnShelfInput.1.3.6.1.4.1.4253.1.3.6.1.60
connCpeTxMcmescSlot mandatory
The connected MCMESC slot.
columnSlotInput.1.3.6.1.4.1.4253.1.3.6.1.61
connCpeTxMcmescPort mandatory
The connected MCMESC port. 1=Link Tx, 2=Link Rx.
columnEnumeration.1.3.6.1.4.1.4253.1.3.6.1.62
connCpeRxMcmescShelf mandatory
The connected MCMESC shelf.
columnShelfInput.1.3.6.1.4.1.4253.1.3.6.1.63
connCpeRxMcmescSlot mandatory
The connected MCMESC slot.
columnSlotInput.1.3.6.1.4.1.4253.1.3.6.1.64
connCpeRxMcmescPort mandatory
The connected MCMESC port. 1=Link Tx, 2=Link Rx.
columnEnumeration.1.3.6.1.4.1.4253.1.3.6.1.65
ccNumPorts mandatory
Total port numbers on each CC card.
columnInteger32.1.3.6.1.4.1.4253.1.3.6.1.66
ccName mandatory
User configurable name of the channel card
columnCardName.1.3.6.1.4.1.4253.1.3.6.1.7
ccFWVersionID mandatory
The current version string of the CC FW code
columnVersionString.1.3.6.1.4.1.4253.1.3.6.1.8
ccMfgBiasCurrent mandatory
Bias current for the optical laser. This is the preset manufacturing value
columnInteger32.1.3.6.1.4.1.4253.1.3.6.1.9