wdmVc4PayloadStatus
LUM-WDM-MIB ·
.1.3.6.1.4.1.8708.2.4.2.6.1.1.14
Object
column
Enumeration
Describes if the VC4/STS3 contains payload.
equipped - VC4/STS3 contains payload.
unequipped - No payload in VC4/STS3.
Context
- MIB
- LUM-WDM-MIB
- OID
.1.3.6.1.4.1.8708.2.4.2.6.1.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wdmVc4Entry
- Table
- wdmVc4Table
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | equipped |
2 | unequipped |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wdmVc4Index An arbitrary index assigned to each if entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.4.2.6.1.1.1 |
| wdmVc4AuAlarmIndicationSignal Alarm indication signal (AIS).
Applicable for SDH/Sonet signal formats.
A: An 'all ones' SDH/Sonet signal is detected.
D: SDH/Sonet signal recovered. | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.6.1.1.10 |
| wdmVc4AuLossOfPointer Loss of pointer detected.
Applicable for SDH/Sonet signal formats.
A: A loss of pointer is detected.
D: SDH/Sonet signal recovered. | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.6.1.1.11 |
| wdmVc4RxSignalStatus The operational state for incoming (RX) signal
of the interface.
down - A fault that would lead to a protection
switch has occurred.
degraded - The s… | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.6.1.1.12 |
| wdmVc4ConcatenationStatus Describes if and how the VC4s are concatenated.
In case of sonet how the STS3s are concatenated.
on - Concatenation is used.
off - No concatenation i… | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.6.1.1.13 |
| wdmVc4ConnectionStatus Shows the name of the client port and
possible subchannel/vc4 that it is connected to
or Unconnected if not connected. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.4.2.6.1.1.15 |
| wdmVc4ConnectedForeignIndex Shows the index of the connected interface.
Or 0 if unconnected. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.4.2.6.1.1.16 |
| wdmVc4AdminStatus The administrative state for the vc4/vc3/STS-1.
down - The vc3/vc4/STS-1 should not be used. This
vc4/vc3 will not affect rxSignalStatus.
up - The vc… | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.6.1.1.17 |
| wdmVc4Name The management name of the vc4/vc3/STS-1,
e.g. vc4:1:2:1-2:8 where the first number
indicates sub-rack, the second slot number and
the third/forth are the port numbers. The last
n… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.4.2.6.1.1.2 |
| wdmVc4Descr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.4.2.6.1.1.3 |
| wdmVc4Subrack The number of the subrack where the vc4/vc3/STS-1 is
located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.4.2.6.1.1.4 |
| wdmVc4Slot The number of the slot where the vc4/vc3/STS-1 is
located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.4.2.6.1.1.5 |
| wdmVc4TxPort The number of the port where the TX-side of the
vc4/vc3/STS-1 is located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.4.2.6.1.1.6 |
| wdmVc4RxPort The number of the port where the RX-side of the
vc4/vc3/STS-1 is located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.4.2.6.1.1.7 |
| wdmVc4Vc4 The id of the vc4 within the STM64/STM16 frame. When
Sonet, the id of the STS3 within the OC192/OC48 frame. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.4.2.6.1.1.8 |
| wdmVc4ObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.4.2.6.1.1.9 |