wdmProtRevertiveSwitch
LUM-WDM-MIB ·
.1.3.6.1.4.1.8708.2.4.2.3.1.1.35
Object
column
r/w
Enumeration
If revertive protection switch is enabled, the primary path will automaticly be chosen as working path if it is operational. A switch back to the primary path will however be delayed with the period of time given by the user.
Context
- MIB
- LUM-WDM-MIB
- OID
.1.3.6.1.4.1.8708.2.4.2.3.1.1.35- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wdmProtEntry
- Table
- wdmProtTable
- Siblings
- 37
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | disabled |
1 | enabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wdmProtIndex An arbitrary index assigned to each entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.4.2.3.1.1.1 |
| wdmProtLastChangeTime The time the operational state of the protection
group was last changed. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.8708.2.4.2.3.1.1.10 |
| wdmProtAdminStatus The administrative state for the protection
group.
down - The protection group is inactive.
leftForced - The left side is forced active.
… | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.3.1.1.11 |
| wdmProtOperStatus deprecated Note: This object is deprecated.
The operational state for the protection group.
bothDown - both sides down
leftDownRightUp - left sid… | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.3.1.1.12 |
| wdmProtRowStatus Manages creation and deletion of conceptual rows.
See also SNMPv2-TC. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8708.2.4.2.3.1.1.13 |
| wdmProtServiceDegraded Protection service degraded.
A: One of the sides of the protection group has
signal failure or one side is forced active.
D: Both sides of the protec… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.4.2.3.1.1.14 |
| wdmProtServiceFailure Protection service failure.
A: Both sides of the protection group has
signal failure or the side that is forced
active has signal failure.
D: One of … | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.4.2.3.1.1.15 |
| wdmProtActiveSide The operational state for the protection group.
none - no side is active.
left - the left side is active.
right - the right side is ac… | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.3.1.1.16 |
| wdmProtLeftStatus The operational state for the left side of the
protection group.
down - this side is out of service.
up - this side is active. | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.3.1.1.17 |
| wdmProtRightStatus The operational state for the right side of
the protection group.
down - this side is out of service.
up - this side is active. | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.3.1.1.18 |
| wdmProtProtectionType Different types of protection realisation
and modelling. The information is intended
for the TNM.
eqAndFiberProtection - multiple boards,
e.g.… | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.3.1.1.19 |
| wdmProtName The name of the object, for example
'pg:1:2:1-2:1:3:1-2', where the numbers indicate the
subrack, slot and TX-RX port number for the left and
right interface of the group.
… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.4.2.3.1.1.2 |
| wdmProtObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.4.2.3.1.1.20 |
| wdmProtWrapperMode Defines how the wrapper will operate
in correlation with the traffic switch.
followTraffic - use the same interface
as the traffic is selected from.
… | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.3.1.1.21 |
| wdmProtWrapperState Shows which interface that currently
is used for wrapper communication. | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.3.1.1.22 |
| wdmProtLeftCommSubrack The subrack number of the left communication link
for this protection group. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.4.2.3.1.1.23 |
| wdmProtLeftCommSlot The slot number of the left communication link for
this protection group. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.4.2.3.1.1.24 |
| wdmProtLeftCommPort The port number of the left communication link for
this protection group | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.4.2.3.1.1.25 |
| wdmProtRightCommSubrack The subrack number of the right communication link
for this protection group. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.4.2.3.1.1.26 |
| wdmProtRightCommSlot The slot number of the right communication link for
this protection group. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.4.2.3.1.1.27 |
| wdmProtRightCommPort The port number of the right communication link for
this protection group | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.4.2.3.1.1.28 |
| wdmProtLeftCommInterface The interface used for the left communication link
for this protection group. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.4.2.3.1.1.29 |
| wdmProtDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.4.2.3.1.1.3 |
| wdmProtRightCommInterface The interface used for the right communication link
for this protection group. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.4.2.3.1.1.30 |
| wdmProtCommunicationFailure Protection group communication failure
A: There are several underlying criterias for this:
- Loss of signal on the communication link
- Errors on the communic… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.4.2.3.1.1.31 |
| wdmProtHubTrafficConfigMismatch Traffic configuration received over the two lines differ.
A: The traffic configuration received
over the two lines do not match.
D: Both lines have t… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.4.2.3.1.1.32 |
| wdmProtSignalDegradeProtection Include signal degraded alarm as a protection
switch criteria. | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.3.1.1.33 |
| wdmProtRevertiveSwitchWtrTimer When revertive mode is enabled and traffic is running on
secondary path, this timer decides when to switch back to
primary path (when the primary path is up and working again).
… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.4.2.3.1.1.34 |
| wdmProtRevertiveSwitchPrimaryPath The interface in the protection group that should be used
as prefered working path. | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.3.1.1.36 |
| wdmProtRevertiveSwitchSecondaryPath The interface in the protection group that is used as
prefered protection path. This is set automatically when
choosing the primary working path. | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.3.1.1.37 |
| wdmProtSecondaryPathUsed Alarm indicating that the alternative secondary path is currently used,
when revertive switching is enabled.
A: Secondary path is used as working path.
… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.4.2.3.1.1.38 |
| wdmProtRightSubrack The subrack number for this protected
interface. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.4.2.3.1.1.4 |
| wdmProtRightSlot The slot number for this protected
interface. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.4.2.3.1.1.5 |
| wdmProtRightPort The port number for the TX side of this
protected interface. Not necessary for boards
with only one interface. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.4.2.3.1.1.6 |
| wdmProtLeftSubrack The subrack number for the other protected
interface. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.4.2.3.1.1.7 |
| wdmProtLeftSlot The slot number for the other protected
interface. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.4.2.3.1.1.8 |
| wdmProtLeftPort The port number for the TX side of the other
protected interface. Not necessary for boards
with only one interface. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.4.2.3.1.1.9 |