wdmMeanChannelPowerControlLatestRegulation
LUM-WDM-MIB ·
.1.3.6.1.4.1.8708.2.4.2.15.1.1.15
Object
column
SNMPv2-TCDateAndTime
The time when the link was last regulated.
Context
- MIB
- LUM-WDM-MIB
- OID
.1.3.6.1.4.1.8708.2.4.2.15.1.1.15- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wdmMeanChannelPowerControlEntry
- Table
- wdmMeanChannelPowerControlTable
- Siblings
- 32
Values & Constraints
Type Constraints
range: 8
range: 11
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wdmMeanChannelPowerControlIndex An index assigned to each entry. The index contains information
about subrack, slot and port for controlled channel. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.4.2.15.1.1.1 |
| wdmMeanChannelPowerControlMonitorName The management name of the monitor port,
for example 'ocm:1:2:1-A'
([monitortype]:[subrack]:[slot]:[port]). | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.4.2.15.1.1.10 |
| wdmMeanChannelPowerControlAdminStatus The administrative state for the local link
adjustment entry.
down - The link adjustment is disabled
service - The link is adjusting the channel
powe… | column | LUM-TCAdminStatusWithNA | .1.3.6.1.4.1.8708.2.4.2.15.1.1.11 |
| wdmMeanChannelPowerControlOperStatus The operational state for the control group
down - The control group cannot operate due
to missing resources or other complications
up - The control … | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.4.2.15.1.1.12 |
| wdmMeanChannelPowerControlStartRegulation Starts a regulation manually | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.4.2.15.1.1.13 |
| wdmMeanChannelPowerControlRegulationRange An offset below the wanted output power
at which the 'Current Power Out Of Range'
alarm shall be raised.
When the current output power is so
far below the wanted ou… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.4.2.15.1.1.14 |
| wdmMeanChannelPowerControlLatestChange The time when the link was latest adjusted | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.8708.2.4.2.15.1.1.16 |
| wdmMeanChannelPowerControlMonitorOffsetCalibrationFailed Alarm raised when calibration of the OCM port fails.
A: calibration of OCM port failed
D: Normal mode | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.4.2.15.1.1.17 |
| wdmMeanChannelPowerControlRegulationState The regulation status for the link
starting - the local link adjustment loop is
reading the power from the
monitor
regulating -… | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.15.1.1.18 |
| wdmMeanChannelPowerControlTimeToNextRegulation The remaining time (in minutes) to next regulation. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.4.2.15.1.1.19 |
| wdmMeanChannelPowerControlName The management name of the local link adjustment
entry 'meanChannelPowerControl:1:2:1'
(meanChannelPowerControl[oa subrack]:[oa slot]:[oa port]). | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.4.2.15.1.1.2 |
| wdmMeanChannelPowerControlWantedChannelPower The wanted output power. | column | Integer32 | .1.3.6.1.4.1.8708.2.4.2.15.1.1.20 |
| wdmMeanChannelPowerControlCurrentChannelPower The actual output power. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.4.2.15.1.1.21 |
| wdmMeanChannelPowerControlCurrentGain OA signal gain set by the local link
adjustment loop | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.4.2.15.1.1.22 |
| wdmMeanChannelPowerControlTotalChannelOutputPower Total channel output power | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.4.2.15.1.1.23 |
| wdmMeanChannelPowerControlNumberOfChannels Number of channels read from OCM | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.4.2.15.1.1.24 |
| wdmMeanChannelPowerControlAbsolutePowerOffset Absolute power offset | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.4.2.15.1.1.25 |
| wdmMeanChannelPowerControlRemainingPowerOffset Remaining power offset | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.4.2.15.1.1.26 |
| wdmMeanChannelPowerControlMonitorOffsetTooLarge Alarm raised when the OCM monitor port offset is too large
A: OCM port offset too large
D: Normal mode | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.4.2.15.1.1.27 |
| wdmMeanChannelPowerControlChannelPowerOutOfRange Alarm raised when the incomming channelpower is
too high or too low to regulate to the wanted
mean channel power
A: channel power out of range
D: Nor… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.4.2.15.1.1.28 |
| wdmMeanChannelPowerControlRegulationInterval Minimum time between two regulations, a random
wait time of up to 15 seconds is added to this
value when calculating when the next regulation
should occurr. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.4.2.15.1.1.29 |
| wdmMeanChannelPowerControlDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.4.2.15.1.1.3 |
| wdmMeanChannelPowerControlAmplifierOutputPort The management name of the OA port controlled by
this control loop | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.4.2.15.1.1.30 |
| wdmMeanChannelPowerControlLatestAmplifierRxPower The latest amplifier input power | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.4.2.15.1.1.31 |
| wdmMeanChannelPowerControlLatestAmplifierTxPower The latest amplifier output power | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.4.2.15.1.1.32 |
| wdmMeanChannelPowerControlLocalId Store the local ID since it will be needed when reading backup | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.4.2.15.1.1.33 |
| wdmMeanChannelPowerControlOcmSubrack The subrack number of the ocm reading the oa
monitor port. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.4.2.15.1.1.4 |
| wdmMeanChannelPowerControlOcmSlot The slot number of the ocm reading the oa
monitor port.
channel is attenuated. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.4.2.15.1.1.5 |
| wdmMeanChannelPowerControlOcmPort The monitor port of this local link
adjustment loop. | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.15.1.1.6 |
| wdmMeanChannelPowerControlOaSubrack The subrack number of the oa that is being
controlled by this local link adjustment
entry | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.4.2.15.1.1.7 |
| wdmMeanChannelPowerControlOaSlot The slot number of the oa that is being
controlled by this local link adjustment
entry | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.4.2.15.1.1.8 |
| wdmMeanChannelPowerControlOaPort The port number of the oa that is being
controlled by this local link adjustment
entry | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.4.2.15.1.1.9 |