wdmDelayCompPGOperStatus
LUM-WDM-MIB ·
.1.3.6.1.4.1.8708.2.4.2.12.1.1.5
Object
column
LUM-TCOperStatusWithNA
The operational state for the object.
notPresent - The object is not available.
down - The object is de-activated or there are
faults preventing its transition to the 'up' state.
up - The object is active.
Context
- MIB
- LUM-WDM-MIB
- OID
.1.3.6.1.4.1.8708.2.4.2.12.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wdmDelayCompPGEntry
- Table
- wdmDelayCompPGTable
- Siblings
- 10
Values & Constraints
Type Values
1 | notPresent |
2 | down |
3 | up |
2147483647 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wdmDelayCompPGIndex An index assigned to each entry. The index contains
information about subrack, slot and port for
controlled channel. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.4.2.12.1.1.1 |
| wdmDelayCompPGFiberLengthDifferenceOOR Fiber length difference out-of-range.
alarm: The fiber length difference is out-of-range.
ok: The fiber length difference is in range. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.4.2.12.1.1.10 |
| wdmDelayCompPGDelayCompensationReset Resets the automatic delay compensation.
After a successful reset the default value
(normal) is restored in this attribute. | column | LUM-TCResetWithNA | .1.3.6.1.4.1.8708.2.4.2.12.1.1.11 |
| wdmDelayCompPGName The management name of the entry, for example
'dcpg:1:3:17-18:1:3:19-20'
(dcpg:[subrack]:[slot]:[leftporttx]-[leftportrx]:[subrack]:[slot]:[rightporttx]-[rightportrx]). | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.4.2.12.1.1.2 |
| wdmDelayCompPGUpId The UpId within the table. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.4.2.12.1.1.3 |
| wdmDelayCompPGAdminStatus The administrative state for the object.
service - The object is activated but alarms
are suppressed. Intended for use during service
or re-configuration. When serv… | column | LUM-TCAdminStatusWithNA | .1.3.6.1.4.1.8708.2.4.2.12.1.1.4 |
| wdmDelayCompPGAutoCompensationMode The automatic delay compensation mode. | column | LUM-TCEnabledDisabledWithNA | .1.3.6.1.4.1.8708.2.4.2.12.1.1.6 |
| wdmDelayCompPGAutoCompensationState The automatic delay compensation state. | column | Enumeration | .1.3.6.1.4.1.8708.2.4.2.12.1.1.7 |
| wdmDelayCompPGDelayDifference The current delay difference in nanoseconds, after compensation.
The difference is calculated as (right line current delay) - (left line current delay). | column | LUM-TCSigned32WithNA | .1.3.6.1.4.1.8708.2.4.2.12.1.1.8 |
| wdmDelayCompPGDelayCompensationOOR Delay compensation out-of-range.
alarm: The delay compensation is out-of-range.
ok: The delay compensation is in range. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.4.2.12.1.1.9 |