roadmLineIfSubrack
LUM-ROADM-MIB ·
.1.3.6.1.4.1.8708.2.31.2.3.1.1.4
Object
The number of the subrack where the interface is located.
Context
- MIB
- LUM-ROADM-MIB
- OID
.1.3.6.1.4.1.8708.2.31.2.3.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- roadmLineIfEntry
- Table
- roadmLineIfTable
- Siblings
- 17
Values & Constraints
Type Constraints
range: 0..15
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| roadmLineIfIndex An arbitrary index assigned to each entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.31.2.3.1.1.1 |
| roadmLineIfOperStatus The operational state for the interface.
notPresent - The physical resources are not
available.
down - The interface is de-activated or the are
fault… | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.31.2.3.1.1.10 |
| roadmLineIfObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.31.2.3.1.1.11 |
| roadmLineIfTxSignalStatus The operational state for outgoing (TX) signal
of the interface.
down - The signal is turned off.
degraded - The signal quality is impaired.
… | column | Enumeration | .1.3.6.1.4.1.8708.2.31.2.3.1.1.12 |
| roadmLineIfNoOfConnectedChannels The number of channels connected to this port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.31.2.3.1.1.13 |
| roadmLineIfViewChannelList Shows a list of all channels connected to any
add/drop port. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.31.2.3.1.1.14 |
| roadmLineIfSetAttenuationCommand Set a fixed attenuation for channels connected to
this port. Control-loop regulated channels
are not affected.
Range: 0 to 15.0 dB | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.31.2.3.1.1.15 |
| roadmLineIfAdjustAttenuationDeltaCommand Increase or decrease the attenuation for channels
connected to this port. Control-loop regulated channels
are not affected.
Range: -15.0 to 15.0 dB | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.31.2.3.1.1.16 |
| roadmLineIfMonitorInsertionLoss The insertion loss for the monitor port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.31.2.3.1.1.17 |
| roadmLineIfSetAdminStatusCommand Set administrative status for channels that are
connected to this port.
Control-loop regulated channels are not affected. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.31.2.3.1.1.18 |
| roadmLineIfName The management name of the interface, for
example 'roadmLine:1:2:1-2', where the first number
indicates sub-rack, the second slot number and
the third is the port number.
Examples… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.31.2.3.1.1.2 |
| roadmLineIfDescr User configurable label.
This attribute can be written via SNMP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.31.2.3.1.1.3 |
| roadmLineIfSlot The number of the slot where the interface is
located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.31.2.3.1.1.5 |
| roadmLineIfTxPort The number of the port where the TX-side of the
interface is located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.31.2.3.1.1.6 |
| roadmLineIfRxPort The number of the port where the RX-side of
the interface is located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.31.2.3.1.1.7 |
| roadmLineIfInvPhysIndexOrZero The row in the invPhysTable for this interface.
Set to 0 if not known. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.31.2.3.1.1.8 |
| roadmLineIfAdminStatus The administrative state for the interface.
down - The interface should be inactive.
service - The interface is activated but alarms
are suppressed. … | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.31.2.3.1.1.9 |