muxVc4ConnectionMode
LUM-MUX-MIB ·
.1.3.6.1.4.1.8708.2.13.2.3.1.1.13
Object
column
deprecated
r/w
Enumeration
Describes how the VC is used in the ring and
the node.
unused - The VC4 is not used in the ring.
ringUsed - the VC4 is used in the ring,
but is not allowed to add/drop in this node.
nodeUsed - the VC4 is allowed to drop in this
node.
Context
- MIB
- LUM-MUX-MIB
- OID
.1.3.6.1.4.1.8708.2.13.2.3.1.1.13- Type
- column
- Access
- readwrite
- Status
- deprecated
- Parent
- muxVc4Entry
- Table
- muxVc4Table
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | unused |
2 | ringUsed |
3 | nodeUsed |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| muxVc4Index An arbitrary index assigned to each if entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.13.2.3.1.1.1 |
| muxVc4ClientDropPort The connected drop port, if muxVc4Mode is
set to 'addDrop'.
0 is undefined (used at pass-through).
For mxp028:
1 - first SMT4 i/f
3 - … | column | Unsigned32 | .1.3.6.1.4.1.8708.2.13.2.3.1.1.10 |
| muxVc4TxDirection The direction of the transmitted signal.
undefined - Unknown/Dont care
toWest - The transmitted signal is sent to west.
toEast - The t… | column | MuxTxDirection | .1.3.6.1.4.1.8708.2.13.2.3.1.1.11 |
| muxVc4ClientAddPort The connected add port, if muxVc4Mode is set
to 'addDrop'.
0 is undefined (used at pass-through)
For mxp028:
2 - first SMT4 i/f
4 - se… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.13.2.3.1.1.12 |
| muxVc4ConnectionStatus deprecated How the VC4 is handled.
addDrop - Add/drop it from/to the ports specified
by muxVc4ClientDropPort and muxVc4ClientAddPort.
passThrough - Pass-through… | column | Enumeration | .1.3.6.1.4.1.8708.2.13.2.3.1.1.14 |
| muxVc4ConnectionOverview What to do with the vc4.
addDrop - Add/drop it from/to the ports specified
by muxVc4ClientDropPort and muxVc4ClientAddPort.
passThrough - Pass-throug… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.13.2.3.1.1.15 |
| muxVc4ObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.13.2.3.1.1.16 |
| muxVc4AuAlarmIndicationSignalW2C Alarm indication signal (AIS) on the trunk-side.
Applicable for SDH/Sonet signal formats.
A: An 'all ones' SDH signal is detected.
D: SDH signal reco… | column | Enumeration | .1.3.6.1.4.1.8708.2.13.2.3.1.1.17 |
| muxVc4AuLossOfPointerW2C Loss of pointer detected on the trunk-side.
Applicable for SDH/Sonet signal formats.
A: A loss of pointer is detected.
D: SDH signal recovered. | column | Enumeration | .1.3.6.1.4.1.8708.2.13.2.3.1.1.18 |
| muxVc4RxSignalStatus The operational state for incoming (RX) signal
of the interface.
down - A fault that would lead to a protection
switch has occurred.
degraded - The s… | column | Enumeration | .1.3.6.1.4.1.8708.2.13.2.3.1.1.19 |
| muxVc4Name The management name of the vc4,
e.g. vc4:1:2:21-22:8 where the first number
indicates sub-rack, the second slot number and
the third/forth are the port numbers. The last
number is… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.13.2.3.1.1.2 |
| muxVc4ConcatenationStatus Describes if the VC4s are concatenated.
on - Concatenation is used.
off - No concatenation is used. | column | Enumeration | .1.3.6.1.4.1.8708.2.13.2.3.1.1.20 |
| muxVc4PayloadStatus Describes if the VC4 contains payload.
equipped - VC4 contains payload.
unequipped - No payload in VC4. | column | Enumeration | .1.3.6.1.4.1.8708.2.13.2.3.1.1.21 |
| muxVc4AdminStatus The administrative state for the interface.
down - The interface should be inactive.
up - The interface should be activated when
it becomes available… | column | Enumeration | .1.3.6.1.4.1.8708.2.13.2.3.1.1.22 |
| muxVc4Descr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.13.2.3.1.1.3 |
| muxVc4Subrack The number of the subrack where the vc4 is
located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.13.2.3.1.1.4 |
| muxVc4Slot The number of the slot where the vc4 is
located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.13.2.3.1.1.5 |
| muxVc4TxPort The number of the port where the TX-side of the
vc4 is located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.13.2.3.1.1.6 |
| muxVc4RxPort The number of the port where the RX-side of the
vc4 is located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.13.2.3.1.1.7 |
| muxVc4Vc4 The id of the vc4 within the STM16 frame. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.13.2.3.1.1.8 |
| muxVc4Mode What to do with the vc4.
addDrop - Add/drop it from/to the ports specified
by muxVc4ClientDropPort and muxVc4ClientAddPort.
passThrough - Pass-throug… | column | Enumeration | .1.3.6.1.4.1.8708.2.13.2.3.1.1.9 |