ifPhysicalTrxTransmitterFailed
LUM-IFPHYSICAL-MIB ·
.1.3.6.1.4.1.8708.2.47.2.2.1.1.11
Object
column
LUM-TCFaultStatusWithNA
Transmitter failed.
The transceiver hardware has detected a failure
in the transmitter part.
Alarm - The transmitter has failed
Ok - The transmitter is OK again
Context
- MIB
- LUM-IFPHYSICAL-MIB
- OID
.1.3.6.1.4.1.8708.2.47.2.2.1.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ifPhysicalTrxEntry
- Table
- ifPhysicalTrxTable
- Siblings
- 23
Values & Constraints
Type Values
1 | ok |
2 | alarm |
2147483647 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifPhysicalTrxIndex An index assigned to each entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.47.2.2.1.1.1 |
| ifPhysicalTrxRxSignalStatus The state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.47.2.2.1.1.10 |
| ifPhysicalTrxNonQualifiedTrx Non-qualified transceiver.
The inserted transceiver does not have a legal
manufacturer code.
Alarm - A non-qualified transceiver is inserted.
… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.47.2.2.1.1.12 |
| ifPhysicalTrxTrxMissing Transceiver missing.
An expected transceiver is missing.
Alarm - An expected transceiver is missing.
Ok - The missing transceiver is i… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.47.2.2.1.1.13 |
| ifPhysicalTrxTrxMediaMismatch Transceiver media mismatch.
The TRX media does not match the expected one.
Alarm - Invalid or mismatching trx media is
detected.
Ok - … | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.47.2.2.1.1.14 |
| ifPhysicalTrxTrxRxState The current Rx state of the transciever, in case it is
a coherent CFP. The unit is ready if state=Ready.
The states could be one of the followings:
R… | column | LUM-TCDisplayStringWithNA | .1.3.6.1.4.1.8708.2.47.2.2.1.1.15 |
| ifPhysicalTrxTrxTxState The current Tx state of the transciever, in case it is
a coherent CFP. The unit is ready if state=Ready.
The states could be one of the followings:
T… | column | LUM-TCDisplayStringWithNA | .1.3.6.1.4.1.8708.2.47.2.2.1.1.16 |
| ifPhysicalTrxOpticalLayerMappingMismatch The inserted transceiver does not support the
configuration of the optical layer mapping.
alarm: A transceiver with other supported optical layer
mapping tha… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.47.2.2.1.1.17 |
| ifPhysicalTrxPowerCycleReset When the attribute is set to reset the trx power cycle
is re-initialised, meaning the trx is cold started. Then the attribute is set to normal again
automatically.
… | column | LUM-TCResetWithNA | .1.3.6.1.4.1.8708.2.47.2.2.1.1.18 |
| ifPhysicalTrxUId An index assigned to each entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.47.2.2.1.1.19 |
| ifPhysicalTrxName The management name of the transceiver, for example
'trx:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numb… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.47.2.2.1.1.2 |
| ifPhysicalTrxAid The access identifier (AID) of the trx.
The format is according to GR-833. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.47.2.2.1.1.20 |
| ifPhysicalTrxPhysicalLocation The physical location of the trx.
The format is according to GR-833. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.47.2.2.1.1.21 |
| ifPhysicalTrxPowerOutOfRange The power classification of the transceiver exceeds the design limit of the board.
alarm: A transceiver with a power classification that exceeds
the design l… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.47.2.2.1.1.22 |
| ifPhysicalTrxLowTemp The temperature of the transceiver is below its designed limit.
alarm: The temperature of the transceiver is below its designed limit.
ok: The temper… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.47.2.2.1.1.23 |
| ifPhysicalTrxCommunicationFailure The board is unable to communicate with the transceiver.
alarm: Protocol errors detected on the transceiver control link.
ok: No communication errors… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.47.2.2.1.1.24 |
| ifPhysicalTrxConnIfBasicIfIndex An index describing to which index in ifBasicIf table
this object is related to. | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.47.2.2.1.1.3 |
| ifPhysicalTrxLaserBias Measures laser bias current value in tenth of
mA (0.1 mA). | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.47.2.2.1.1.4 |
| ifPhysicalTrxLaserTemp The actual laser temperature in units of
0.1 degrees Centigrades. | column | LUM-TCInteger32WithNA | .1.3.6.1.4.1.8708.2.47.2.2.1.1.5 |
| ifPhysicalTrxTrxClass String that describes the transceiver class. | column | LUM-TCDisplayStringWithNA | .1.3.6.1.4.1.8708.2.47.2.2.1.1.6 |
| ifPhysicalTrxTrxMedia Defines the transceiver media.
For example 'optical' or 'electrical'. | column | LUM-TCTrxMediaWithNA | .1.3.6.1.4.1.8708.2.47.2.2.1.1.7 |
| ifPhysicalTrxActualTrxMedia Defines the media and capability of the TRX. | column | LUM-TCTrxMediaWithNA | .1.3.6.1.4.1.8708.2.47.2.2.1.1.8 |
| ifPhysicalTrxTxSignalStatus The state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.47.2.2.1.1.9 |