ifOtnOpuTxClientSignalFail
LUM-IFOTN-MIB ·
.1.3.6.1.4.1.8708.2.50.2.4.1.1.7
Object
column
LUM-TCFaultStatusWithNA
Tx Client signal fail (CSF).
Indicates if insignal in remote end is failed or not.
alarm: Remote end client is faulty.
ok: Remote end client is OK.
Reference: 17.1 G.709/Y.1331
Context
- MIB
- LUM-IFOTN-MIB
- OID
.1.3.6.1.4.1.8708.2.50.2.4.1.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ifOtnOpuEntry
- Table
- ifOtnOpuTable
- Siblings
- 11
Values & Constraints
Type Values
1 | ok |
2 | alarm |
2147483647 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifOtnOpuIndex An index assigned to each entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.50.2.4.1.1.1 |
| ifOtnOpuLossOfOpuMultiFrameIdentifier Rx Loss of OPU Multi-frame identifier (LOOMFI).
Monitored overhead: OPU4 Multi-Frame Identifier
Direction: OPU4 Rx. If the expected 80-frame identifi… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.50.2.4.1.1.10 |
| ifOtnOpuRxClientMaintenanceIndication Rx generic alarm indication signal (generic AIS).
Indicates if client maintenance signal (PN11)
exists or not.
alarm: A client maintenance signal is … | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.50.2.4.1.1.11 |
| ifOtnOpuConnOduIndex An index that describes to which index in Odu table
this object is related. | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.50.2.4.1.1.12 |
| ifOtnOpuName The management name of the otn opu, for example 'opu:1:2:1-2',
where the first number indicates subrack, the second slot
number and the third/fourth are the physical port numbers. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.50.2.4.1.1.2 |
| ifOtnOpuConnIfBasicIfIndex An index that describes to which index in ifBasicIf table
this object is related. | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.50.2.4.1.1.3 |
| ifOtnOpuTxSignalStatus The state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.50.2.4.1.1.4 |
| ifOtnOpuRxSignalStatus The state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.50.2.4.1.1.5 |
| ifOtnOpuTxClientMaintenanceIndication Tx generic alarm indication signal (generic AIS).
Indicates if client maintenance signal (PN11)
exists or not.
alarm: A client maintenance signal is … | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.50.2.4.1.1.6 |
| ifOtnOpuRxPayloadMismatch Rx Payload mismatch (PLM).
Monitored overhead: OPUk-PLM
Direction: Received from the associated physical interface and, unless the ODUk is terminated… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.50.2.4.1.1.8 |
| ifOtnOpuTxPayloadMismatch Tx Payload mismatch (PLM).
Monitored overhead: OPUk-PLM
Direction: Received from the board-internal G.805 Matrix and, if applicable, sent towards the… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.50.2.4.1.1.9 |