ifOpticalTransSectionLaserForcedOn
LUM-IFOPTICAL-MIB ·
.1.3.6.1.4.1.8708.2.48.2.2.1.1.20
Object
When enabled, the laser is forced on regardless of
circumstances. Be aware that enabling this mode might
interfere with other functions and affect working traffic.
When used with Y-cable (Optical coupler) protection it is
expected that the TX fiber is manually removed prior to
the command.
disabled - The laser is controlled automatically by the system.
enabled - The laser is forced on.
Context
- MIB
- LUM-IFOPTICAL-MIB
- OID
.1.3.6.1.4.1.8708.2.48.2.2.1.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ifOpticalTransSectionEntry
- Table
- ifOpticalTransSectionTable
- Siblings
- 19
Values & Constraints
Type Values
1 | disabled |
2 | enabled |
2147483647 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifOpticalTransSectionIndex An index assigned to each entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.48.2.2.1.1.1 |
| ifOpticalTransSectionReceiverSensitivity The lowest power that the receiver is guaranteed
to handle, in units of 0.1 dBm. | column | LUM-TCSigned32WithNA | .1.3.6.1.4.1.8708.2.48.2.2.1.1.10 |
| ifOpticalTransSectionTxSignalStatus The state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.48.2.2.1.1.11 |
| ifOpticalTransSectionRxSignalStatus The state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.48.2.2.1.1.12 |
| ifOpticalTransSectionLossOfSignal Loss of signal (LOS).
The received signal has disappeared.
alarm - Loss of signal active
ok - Loss of signal is not active | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.48.2.2.1.1.13 |
| ifOpticalTransSectionRxPowerLevelLow Low rx power.
Received power level low threshold exceeded.
Applicable for all signal formats.
alarm: The received power level is below… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.48.2.2.1.1.14 |
| ifOpticalTransSectionRxPowerLevelHigh High rx power.
Received power level is too high.
Applicable for all signal formats.
alarm: The received power level is too high.
… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.48.2.2.1.1.15 |
| ifOpticalTransSectionRxExcessiveInputPower Excessively high rx power.
Received power level is excessively high.
Applicable for all signal formats.
alarm: The received power leve… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.48.2.2.1.1.16 |
| ifOpticalTransSectionTxPowerLow Low tx power.
Transmit power is lower than the set threshold.
Applicable for all signal formats.
alarm: The transmit power level is lo… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.48.2.2.1.1.17 |
| ifOpticalTransSectionRxPowerLevelLowAbsoluteThld The lower threshold for received power level in
units of 0.1 dB. | column | Integer32 | .1.3.6.1.4.1.8708.2.48.2.2.1.1.18 |
| ifOpticalTransSectionLossThld The threshold to declare LOS. | column | Integer32 | .1.3.6.1.4.1.8708.2.48.2.2.1.1.19 |
| ifOpticalTransSectionName The management name of the optical transmission section,
for example 'ots:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the p… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.48.2.2.1.1.2 |
| ifOpticalTransSectionConnIfBasicIfIndex An index describing to which index in ifBasicIf table
this object is related to. | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.48.2.2.1.1.3 |
| ifOpticalTransSectionForwardAls Forward Automatic Laser Shut-down. Decides if
laser shutdown of the client should occur when
a defect on the line or remote client is detected.
disabled - The laser… | column | LUM-TCEnabledDisabledWithNA | .1.3.6.1.4.1.8708.2.48.2.2.1.1.4 |
| ifOpticalTransSectionRxPowerLevel The received power level in units of 0.1 dBm. | column | LUM-TCSigned32WithNA | .1.3.6.1.4.1.8708.2.48.2.2.1.1.5 |
| ifOpticalTransSectionRxPowerLevelLowRelativeThld The lower threshold for received power level in
units of 0.1 dB, relative to the receiver
sensitivity. | column | Integer32 | .1.3.6.1.4.1.8708.2.48.2.2.1.1.6 |
| ifOpticalTransSectionTxPowerLevel The transmitted power level in units of 0.1 dBm. | column | LUM-TCSigned32WithNA | .1.3.6.1.4.1.8708.2.48.2.2.1.1.7 |
| ifOpticalTransSectionLaserMode The administrative state of the TX-side laser.
als - Automatic Laser Shutdown/Turn-Off
when lossOfSignal is detected on the RX side of
the trunk interface.
… | column | LUM-TCLaserMode | .1.3.6.1.4.1.8708.2.48.2.2.1.1.8 |
| ifOpticalTransSectionLaserStatus The actual state of the TX-side laser.
on - The laser is turned on.
off - The laser is turned off. | column | LUM-TCOnOff | .1.3.6.1.4.1.8708.2.48.2.2.1.1.9 |