ifOpticalTransLaneCarrierGroupName
LUM-IFOPTICAL-MIB ·
.1.3.6.1.4.1.8708.2.48.2.7.1.1.2
Object
The management name of the OTLCG object, for example 'lineOtlcg:1:2:1-2', where the first number indicates subrack, the second slot number, the third/fourth are the physical port numbers.
Context
- MIB
- LUM-IFOPTICAL-MIB
- OID
.1.3.6.1.4.1.8708.2.48.2.7.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ifOpticalTransLaneCarrierGroupEntry
- Table
- ifOpticalTransLaneCarrierGroupTable
- Siblings
- 18
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifOpticalTransLaneCarrierGroupIndex An index assigned to each entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.48.2.7.1.1.1 |
| ifOpticalTransLaneCarrierGroupLossOfSignal Loss of signal (LOS).
The received signal has disappeared.
alarm - Loss Of Signal active
ok - Loss of signal is not active | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.48.2.7.1.1.10 |
| ifOpticalTransLaneCarrierGroupRxPowerLevelLowRelativeThld The lower threshold for received power level in
units of 0.1 dB, relative to the receiver
sensitivity.
If multi lane transceiver is used this threshold
is used on all lanes. | column | Integer32 | .1.3.6.1.4.1.8708.2.48.2.7.1.1.11 |
| ifOpticalTransLaneCarrierGroupRxPowerLevelLow Low rx power.
Received power level low threshold exceeded.
If multi lane transceiver is used the threshold
is exceeded on at least one lane.
Applicab… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.48.2.7.1.1.12 |
| ifOpticalTransLaneCarrierGroupTxFrequency The transmitted frequency given in wavelength nm
or as channels, in case of multi lambda lane transciever
this is the base frequency.
E.g. ch871 means the frequency 187.1 THz.
w13… | column | LUM-TCFrequency | .1.3.6.1.4.1.8708.2.48.2.7.1.1.13 |
| ifOpticalTransLaneCarrierGroupExpectedTxFrequency The expected frequency given in wavelength nm
or as channels.
E.g. ch871 means the frequency 187.1 THz.
w1310 means the wavelength 1310 nm. | column | LUM-TCFrequencyOnlyNotApplicable | .1.3.6.1.4.1.8708.2.48.2.7.1.1.14 |
| ifOpticalTransLaneCarrierGroupUnexpectedTxFrequency Unexpected transmitted frequency.
The actual frequency does not match the
pre-configured frequency.
A pre-configured frequency of '0' matches
all act… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.48.2.7.1.1.15 |
| ifOpticalTransLaneCarrierGroupIllegalTxFrequency Illegal tx frequency.
The tx frequency supported by the transceiver is not
recognized by the system.
alarm: Invalid or unknown frequency information … | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.48.2.7.1.1.16 |
| ifOpticalTransLaneCarrierGroupCounterSesReset Reset SES Counter.
After a successful reset the default value
(normal) is restored in this attribute. | column | LUM-TCResetWithNA | .1.3.6.1.4.1.8708.2.48.2.7.1.1.17 |
| ifOpticalTransLaneCarrierGroupMinimumLaneRxPowerLevel The minimum received power level on any lane in units of 0.1 dBm. | column | LUM-TCSigned32WithNA | .1.3.6.1.4.1.8708.2.48.2.7.1.1.18 |
| ifOpticalTransLaneCarrierGroupReceiverLaneSensitivity The lowest power that the receiver is guaranteed
to handle, on a single lane, in units of 0.1 dBm. | column | LUM-TCSigned32WithNA | .1.3.6.1.4.1.8708.2.48.2.7.1.1.19 |
| ifOpticalTransLaneCarrierGroupConnIfBasicIfIndex An index describing to which index in ifBasicIf table
this object is related to. | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.48.2.7.1.1.3 |
| ifOpticalTransLaneCarrierGroupTxSignalStatus The state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
… | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.48.2.7.1.1.4 |
| ifOpticalTransLaneCarrierGroupRxSignalStatus The state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.48.2.7.1.1.5 |
| ifOpticalTransLaneCarrierGroupForwardAls Forward Automatic Laser Shut-down. Decides if
laser shutdown of the client should occur when
a defect on the line or remote client is detected.
disabled - The laser… | column | LUM-TCEnabledDisabledWithNA | .1.3.6.1.4.1.8708.2.48.2.7.1.1.6 |
| ifOpticalTransLaneCarrierGroupLaserStatus The actual state of the TX-side laser.
on - The laser is turned on.
off - The laser is turned off. | column | LUM-TCOnOff | .1.3.6.1.4.1.8708.2.48.2.7.1.1.7 |
| ifOpticalTransLaneCarrierGroupTxPowerLevel The total transmitted power level, including all lanes,
in units of 0.1 dBm. | column | LUM-TCSigned32WithNA | .1.3.6.1.4.1.8708.2.48.2.7.1.1.8 |
| ifOpticalTransLaneCarrierGroupRxPowerLevel The total received power level, including all lanes,
in units of 0.1 dBm. | column | LUM-TCSigned32WithNA | .1.3.6.1.4.1.8708.2.48.2.7.1.1.9 |