ifOpticalChannelLaserNotTuned
LUM-IFOPTICAL-MIB ·
.1.3.6.1.4.1.8708.2.48.2.3.1.1.12
Object
column
LUM-TCFaultStatusWithNA
Laser not tuned.
The tunable laser is not tuned to set frequency yet.
This alarm can be cleared by setting the attribute
LaserForcedOn to enabled. Note that this can disturb
traffic. See the help for LaserForcedOn in optical
transsection for more information.
alarm: Tunable laser is not tuned to set frequency.
ok: Tunable laser is tuned to set frequency.
Context
- MIB
- LUM-IFOPTICAL-MIB
- OID
.1.3.6.1.4.1.8708.2.48.2.3.1.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ifOpticalChannelEntry
- Table
- ifOpticalChannelTable
- Siblings
- 12
Values & Constraints
Type Values
1 | ok |
2 | alarm |
2147483647 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifOpticalChannelIndex An index assigned to each entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.48.2.3.1.1.1 |
| ifOpticalChannelNoTxFrequencySet No tx frequency set.
The tunable laser frequency has not been set.
alarm: Tunable laser frequency is not set.
ok: Tunable laser freque… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.48.2.3.1.1.10 |
| ifOpticalChannelDispersionSearchLimit The upper search limit for the module dispersion compensator. Medium
= 22,500 ps/nm, which corresponds to approximately 1300 km standard
fiber. High = 30,000 ps/nm, which correspo… | column | LUM-TCDispersionSearchLimit | .1.3.6.1.4.1.8708.2.48.2.3.1.1.11 |
| ifOpticalChannelLineCoding Line coding.
qam16 - 16QAM
dqpsk - D-QPSK
qpsk - QPSK
notApplicable - 2147483647 is used to indicate that the attribute
is not used on … | column | Enumeration | .1.3.6.1.4.1.8708.2.48.2.3.1.1.13 |
| ifOpticalChannelName The management name of the optical channel,
for example 'och:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port … | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.48.2.3.1.1.2 |
| ifOpticalChannelConnIfBasicIfIndex An index describing to which index in ifBasicIf table
this object is related to. | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.48.2.3.1.1.3 |
| ifOpticalChannelTxFrequency The transmitted frequency given in wavelength nm
or as channels.
E.g. ch871 means the frequency 187.1 THz.
w1310 means the wavelength 1310 nm. | column | LUM-TCFrequency | .1.3.6.1.4.1.8708.2.48.2.3.1.1.4 |
| ifOpticalChannelExpectedTxFrequency The expected frequency given in wavelength nm
or as channels.
E.g. ch871 means the frequency 187.1 THz.
w1310 means the wavelength 1310 nm. | column | LUM-TCFrequencyOnlyNotApplicable | .1.3.6.1.4.1.8708.2.48.2.3.1.1.5 |
| ifOpticalChannelTxSignalStatus The state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.48.2.3.1.1.6 |
| ifOpticalChannelRxSignalStatus The state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.48.2.3.1.1.7 |
| ifOpticalChannelIllegalTxFrequency Illegal tx frequency.
The tx frequency supported by the transceiver is not
recognized by the system.
alarm: Invalid or unknown frequency information … | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.48.2.3.1.1.8 |
| ifOpticalChannelUnexpectedTxFrequency Unexpected transmitted frequency.
The actual frequency does not match the
pre-configured frequency.
A pre-configured frequency of '0' matches
all act… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.48.2.3.1.1.9 |