ifFcPhysicalRxHighBitErrorRate
LUM-IFFC-MIB ·
.1.3.6.1.4.1.8708.2.59.2.2.1.1.11
Object
column
LUM-TCFaultStatusWithNA
Rx High bit error rate (Hi-Ber).
alarm: Active high bit error rate.
ok: Inactive high bit error rate.
Context
- MIB
- LUM-IFFC-MIB
- OID
.1.3.6.1.4.1.8708.2.59.2.2.1.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ifFcPhysicalEntry
- Table
- ifFcPhysicalTable
- Siblings
- 12
Values & Constraints
Type Values
1 | ok |
2 | alarm |
2147483647 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifFcPhysicalIndex An index assigned to each entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.59.2.2.1.1.1 |
| ifFcPhysicalTxPcsLossOfSync Tx PCS Loss of sync.
A: FC 'frame' can not be located.
D: FC 'frame' is located. | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.59.2.2.1.1.10 |
| ifFcPhysicalRxLocalLinkFault Rx Local link fault (LLF).
alarm: Active local link fault indication.
ok: Inactive local link fault indication. | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.59.2.2.1.1.12 |
| ifFcPhysicalTxLocalLinkFault Tx Local link fault (LLF).
alarm: Active local link fault indication.
ok: Inactive local link fault indication. | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.59.2.2.1.1.13 |
| ifFcPhysicalName The management name of the optical transmission section,
for example 'clientFcPh:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
ar… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.59.2.2.1.1.2 |
| ifFcPhysicalConnIfBasicIfIndex An index that describes to which index in ifBasicIf table
this object is related. | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.59.2.2.1.1.3 |
| ifFcPhysicalTxSignalStatus The state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.59.2.2.1.1.4 |
| ifFcPhysicalRxSignalStatus The state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.59.2.2.1.1.5 |
| ifFcPhysicalRemoteLinkFault Remote link fault (RLF).
Reference: 1000Base-SX/LX: 37.2.1.5 RF1/RF2 IEEE 802.3ah
alarm: Active remote link fault indication.
ok: Inac… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.59.2.2.1.1.6 |
| ifFcPhysicalLocalLinkFault Local link fault (LLF).
Reference: 49.2.4.5 => 46.3.4 (link_fault in 46.3.4.2) 49.2.13.3
alarm: Active local link fault indication.
ok… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.59.2.2.1.1.7 |
| ifFcPhysicalLinkDown Link down.
alarm: Failure to negotiate a connection with the
other party.
ok: A connection is negotiated. | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.59.2.2.1.1.8 |
| ifFcPhysicalPcsLossOfSync Rx PCS Loss of sync.
A: FC 'frame' can not be located.
D: FC 'frame' is located. | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.59.2.2.1.1.9 |